UNITRONICS UIA-0402N Uni-Input-Output Modules

Umyalelo obalulekileyo

I-Uni-I/O™ lusapho lweemodyuli zeInput/output ezihambelana neqonga lolawulo le-UniStream™.
Esi sikhokelo sibonelela ngolwazi olusisiseko lofakelo lwemodyuli ye-UIA-0402N. Iinkcukacha zobugcisa zinokukhutshelwa kwi-Unitronics webindawo.
Iqonga le-UniStream™ liquka
Abalawuli be-CPU, iiphaneli ze-HMI, kunye nasekhaya
Iimodyuli ze-I/O
ezidibanisayo ukwenza i
zonke-in-enye Programmable Logic
Umlawuli (PLC).

Faka iimodyuli ze-Uni-I/O™:

• Ngasemva kwayo nayiphi na iPaneli ye-HMI ye-UniStream™ equka i-CPU-for-Panel.
  
• Kwi-DIN-umzila, usebenzisa iKhithi yoKwandiswa kweNdawo.
  

Elona nani likhulu leemodyuli ze-Uni-I/O™ ezinokudityaniswa kumlawuli omnye we-CPU zilinganiselwe. Ukufumana iinkcukacha, nceda ujonge kumaphepha acacisiweyo eUniStream™ CPU okanye naziphi na iiKits ezifanelekileyo zeNdawo zoKwandiswa.

Ngaphambi kokuba Uqale

Ngaphambi kokufaka isixhobo, isifakeli kufuneka:

• Funda kwaye uqonde olu xwebhu.
• Qinisekisa imixholo yeKit.

Iimfuno zokhetho lofakelo

Ukuba uhlohla imodyuli ye-Uni-I/O™ kwi:

• Iphaneli ye-HMI ye-UniStream™; iPaneli kufuneka iqulathe i-CPU-for-Panel, efakwe ngokwe-CPU-for-Panel isikhokelo sokufakela.
• I-DIN-kaloliwe; kufuneka usebenzise iKhithi yoKwandiswa kweNdawo, ekhoyo ngeodolo eyahlukileyo, ukudibanisa iimodyuli ze-Uni-I/O™ kwi-DIN-umzila kaloliwe kwisixokelelwano solawulo se-UniStream™.

Iimpawu zesilumkiso kunye nezithintelo ngokubanzi

Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo.

Uphawu	Intsingiselo	Inkcazo
	Ingozi	Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi
	Isilumkiso	Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi.
Isilumkiso	Isilumkiso	Lumka

• Zonke exampi-les kunye nemizobo yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi examples.
• Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe.
• Le mveliso kufuneka ifakwe kuphela ngabasebenzi abaqeqeshiweyo.

• Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati.
• Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
• Musa ukuqhagamshela/uqhawule uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo

• Ukungena komoya: 10mm (0.4”) yendawo iyafuneka phakathi kwesiphelo sesixhobo esingaphezulu/esezantsi kunye neendonga zoluvalo.
• Musa ukufaka kwiindawo ezine: uthuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho kunye nemida enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Imixholo yeKit

• Imodyuli ye-1 UIA-0402N
• Iibhloko ze-terminal ezi-4 ze-I/O (ezi-2 ezimnyama nezi-2 ezingwevu)

Umzobo we-UIA-0402N

1	Iikliphu ze-DIN-kaloliwe	Ukubonelela ngenkxaso yomzimba kwi-CPU kunye neemodyuli. Kukho iziqeshana ezimbini: enye phezulu (ibonisiwe), enye isezantsi (engaboniswanga).
2	Igalelo 0-1	Amanqaku oqhagamshelwano
3	Igalelo 2-3
4	I/O Ibhasi – Ekhohlo	Icala lasekhohlo Isidibanisi
5	Isitshixo sokuQhagamshelwa kwebhasi	Slayida iSitshixo sesiQhagamshelwano seBhasi ngasekhohlo, ukudibanisa ngombane imodyuli ye-UniI/O™ kwi-CPU okanye imodyuli esecaleni.
6	I/O Ibhasi – Ekunene	Isidibanisi secala lasekunene, sithunyelwe sigqunyiwe. Shiya igqunyiwe xa ingasetyenziswa.
	I-Bus Connector Cover
7	Iziphumo 1	Amanqaku oqhagamshelwano lwemveliso
8	Iziphumo 0

9	Ii-LED zemveliso	Ii-LED ezibomvu
10	Igalelo le-LEDs	Ii-LED ezibomvu
11	Imeko ye-LED	I-Tricolor LED, eluhlaza / ebomvu / e-Orenji

NOTE ▪ Jonga kwiphepha lengcaciso yemodyuli yezalathisi ze-LED.

12	Umnyango wemodyuli	Ithunyelwe ngenqanawa igqunywe ngeteyiphu yokukhusela ukuthintela ucango ukuba ungakrwelwa. Susa iteyiphu ngexesha lofakelo.
13	Screw imingxuma	Yenza ukufakwa kweephaneli umngxuma ububanzi: 4mm (0.15”).

Malunga neziQhagamshelwano zeBhasi ze-I/O

Izixhumi zebhasi ze-I / O zibonelela ngamanqaku okudibanisa ngokomzimba kunye nombane phakathi kweemodyuli. Isidibanisi sithunyelwa sigutyungelwe sikhuselo esikhuselayo, sikhusela ikhonkco kwi-debris, umonakalo, kunye ne-ESD.

I-I/O Bus – Ekhohlo (#4 kumzobo) inokudityaniswa nokuba yi-CPU-for-Panel, imodyuli ye-Uni-COM™, kwenye imodyuli ye-Uni-I/O™ okanye kwiYunithi yokuPhela yoLwandiso lweNdawo. Ikhithi.
I-O / O Ibhasi - Ekunene (#6 kumzobo) inokudityaniswa kwenye imodyuli ye-I / O, okanye kwiCandelo leSiseko seNdawo yoKwandiswa kweNdawo.

Isilumkiso

• Ukuba imodyuli ye-I / O ifumaneka ekugqibeleni kuqwalaselo, kwaye akukho nto iza kudibaniswa nayo, musa ukuyisusa i-Bus Connector Cover yayo.

Ukuhlohla

• Cima amandla enkqubo phambi kokudibanisa okanye ukuqhawula nayiphi na iminqongo okanye izixhobo.
• Sebenzisa izilumkiso ezifanelekileyo ukukhusela i-Electro-Static Discharge (ESD).

Ukuhlohla iModyuli ye-Uni-I/O™ kwiPhaneli ye-HMI ye-UniStream™

PHAWULA

Ulwakhiwo lodidi lwe-DIN-kaloliwe ngasemva kwendawo yolawulo lubonelela ngenkxaso ebonakalayo kwimodyuli ye-UniI/O™.

1. Jonga iyunithi oza kuqhagamshela kuyo imodyuli ye-Uni-I/O™ ukuqinisekisa ukuba isiQhagamshelwano saso seBhasi asigqunywanga.
   
   Ukuba imodyuli ye-Uni-I/O™ iya kuba yeyokugqibela kuqwalaselo, musa ukususa isigqubuthelo seSiqhagamshelo seBhasi ye-I/O – Ekunene.
2.  Vula ucango lwemodyuli ye-Uni-I/O™ kwaye uyibambe njengoko kubonisiwe kumzobo ohamba nalo.
   
3. Sebenzisa itonela yesikhokelo ephezulu nasezantsi (ulwimi & nomjelo) ukutyibilikisa imodyuli ye-Uni-I/O™ endaweni.
4. Qinisekisa ukuba iikliphu zikaloliwe zeDIN ezibekwe phezulu nasezantsi kwimodyuli ye-Uni-I/O™ ziye zangena kwi-DIN-rail.
   
5. Slayida isiQhagamshelwano seBhasi yonke indlela ukuya ekhohlo njengoko kubonisiwe kumzobo ohamba neli phepha.
6. Ukuba sele kukho imodyuli ebekwe ngasekunene kwayo, gqibezela uqhagamshelo ngokutyixa isitshixo soQhagamshelwano lweBhasi yeyunithi esecaleni ukuya ekhohlo.
7. Ukuba imodyuli yeyokugqibela kuqwalaselo, shiya i-I/O isidibanisi sebhasi sigqunyiwe.

Ukususa iModyuli

1. Cima amandla enkqubo.
2. Nqamula iitheminali ze-I/O (#2,3,7,8 kumzobo).
3. Susa uqhagamshelwano lwemodyuli ye-Uni-I/O™ kwiiyunithi ezimeleneyo: tyibilikisa iSitshixo sesiQhagamshelwano seBhasi ekunene. Ukuba kukho iyunithi ebekwe ekunene kwayo, tyibela isitshixo sale modyuli ekunene ngokunjalo.
4. Kwimodyuli ye-Uni-I/O™, tsala ikliphu ephezulu kaloliwe ye-DIN phezulu kunye nekliphu esezantsi ezantsi.
5. Vula ucango lwe-Uni-I/O™ uze ulubambe ngeminwe emibini njengoko kubonisiwe kumfanekiso okwiphepha lesi-3; uze uyitsale ngononophelo kwindawo yayo.

Ukufakela iimodyuli ze-Uni-I/O™ kwi-DIN-rail

Ukunyusela iimodyuli kwi-DIN-umzila kaloliwe, landela amanyathelo 1-7 ekufakeni iModyuli ye-Uni-I/O™ kwiPhaneli ye-HMI ye-UniStream kwiphepha lesi-3.

Ukuze uqhagamshele iimodyuli kwisilawuli se-UniStream™, kufuneka usebenzise iKhithi yoKwandiswa kweNgingqi.

Ezi zixhobo ziyafumaneka kunye nangaphandle kwezixhobo zombane, kunye neentambo zobude obahlukeneyo. Ngolwazi olupheleleyo, nceda ujonge kwisikhokelo sofakelo seKhithi yoKwandiswa kweNdawo efanelekileyo.

Iimodyuli zamanani

Unganombola iimodyuli ngeenjongo zereferensi. Iseti yezitikha ezingama-20 zibonelelwa nge-CPU-for-Panel nganye; sebenzisa ezi zincamathelisi ukufaka iinombolo kwiimodyuli.

• Iseti iqulethe izitikha ezinenombolo nezingenanto njengoko kubonisiwe kumfanekiso ongasekhohlo.
• Zibeke kwiimodyuli njengoko kubonisiwe kumfanekiso osekunene.

Ukuthotyelwa kwe-UL

Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL. Le mifuziselo ilandelayo: UIA-0006, UID-0808R, UID-W1616R,UIS-WCB1 zi-UL zidweliswe kwiiNdawo ezinobungozi. Le mizekelo ilandelayo: UIA-0006, UIA-0402N,UIA-0402NL,UIA-0800N,UID-0016R,UID-0016RL, UID-0016T, UID-0808R, UID-0808RL, UID-0808T, UID-0808 0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-W1616R, UID-W1616T, UIS-04PTKN, UIS-04PTN, UIS-08TC, UIS-WCB1, UIS-WCB2 are Ordinary Location ezidweliswe kwi-UL.

Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D

La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.

Isilumkiso

• Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingenabungozi kuphela.
  I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
  ISILUMKISO—Ingozi yokuqhambuka—ukutshintshwa kwamalungu kunokuphazamisa ukufaneleka koKlasi I, iCandelo lesi-2.
• ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula isixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo yaziwa ngokuba ayinabungozi.
• ISILUMKISO-Ukuvezwa kwezinye iikhemikhali kunokuthoba iimpawu zokutywina zemathiriyeli esetyenziswa kwiiRelay.
• Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.
• Esi sixhobo senzelwe ukusebenza kuphela kwi-SELV/PELV/Class 2/Limited Power environments.
• Zonke izixhobo zombane kwinkqubo kufuneka zibandakanye ukugquma kabini. Iziphumo zonikezelo lwamandla kufuneka zilinganiswe
  njenge-SELV/PELV/Class 2/Limited Power.
• Sukuqhagamshela nokuba yi-'Neutral' okanye 'Layini' isignali ye-110/220VAC kwindawo ye-0V yesixhobo.
• Musa ukubamba iingcingo eziphilayo.
• Yonke imisebenzi yokufaka iintambo kufuneka yenziwe ngelixa umbane LUVALIWE.
• Sebenzisa ukhuseleko lwangoku, olufana ne-fuse okanye i-breaker circuit, ukunqanda imisinga egqithisileyo kwi-UIA-0402N port port.
• Amanqaku angasetyenziswanga akufanele adityaniswe (ngaphandle kokuba kuchazwe ngenye indlela). Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.

Isilumkiso

• Ukuze ugweme ukonakalisa ucingo, sebenzisa i-torque ephezulu ye-0.5 N · m (5 kgf·cm).
• Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Inkqubo yocingo

Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm2 -3.31 mm2

1. Hlubula ucingo ukuya kubude be-7±0.5mm (0.250-0.300 intshi).
2. Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
3. Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
4. Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.

Amanqaku oQhagamshelwano lwe-UIA-0402N

Yonke imizobo yocingo kunye nemiyalelo kolu xwebhu ibhekisa kwiindawo zoqhagamshelo ze-UIA-0402N.

Ezi ngongoma zicwangciswe ngamaqela amane amanqaku angama-7 njengoko kuboniswe kumfanekiso osekunene.

Amaqela amabini aphezulu
Amanqaku oqhagamshelwano
Amaqela amabini asezantsi
Iziphumo kunye neendawo zoqhagamshelwano zombane

Izikhokelo zocingo

Ukuqinisekisa ukuba isixhobo siya kusebenza ngokufanelekileyo kwaye sithintele ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabhinethi yentsimbi. Qinisekisa ukuba ikhabhinethi kunye neengcango zayo zinomhlaba ngokufanelekileyo.
• Sebenzisa iingcingo ezinobungakanani obufanelekileyo bomthwalo.
• Sebenzisa iintambo ezijijekileyo ezikhuselweyo zocingo lweempawu ze-Analog I/O; musa ukusebenzisa ikhaka lentambo njengophawu oluqhelekileyo (CM) / indlela yokubuya.
• Hambisa umqondiso we-I/O nganye ngocingo oluzinikeleyo oluqhelekileyo. Qhagamshela iingcingo eziqhelekileyo ngokwesiqhelo kwazo (CM)
  amanqaku kwimodyuli ye-I/O.
• Ngomntu ngamnye qhagamshela indawo nganye ye-0V kunye nendawo nganye eqhelekileyo (CM) kwisistim kwi-terminal ye-0V yombane, ngaphandle kokuba
  ichazwe ngenye indlela.
• Qhagamshela indawo nganye esebenzayo ( ) kumhlaba wenkqubo (ngokukhethekileyo kwi-chassis yekhabhinethi yesinyithi).
  Sebenzisa ezona ngcingo zimfutshane nezingqindilili kangangoko kunokwenzeka: ngaphantsi kwe-1m (3.3') ngobude, ubukhulu obuncinane buyi-14 AWG (2 mm2).
• Qhagamshela unikezelo lwamandla 0V kumhlaba wenkqubo.
• Ukwenza ikhuselo leentambo:
• Xhuma i-cable shield kumhlaba wenkqubo - ngokukhethekileyo kwi-chassis yekhabhinethi yensimbi. Qaphela ukuba isikhuselo kufuneka sidibaniswe kuphela ekupheleni kwentambo; ngokwesiqhelo, ukubeka ikhaka kwi-UIA-0402N ekupheleni kusebenza ngcono.
• Gcina uqhagamshelo lwekhaka lufutshane kangangoko.
• Qinisekisa ukuqhubekeka kwekhaka xa usandisa iintambo ezikhuselekileyo.

PHAWULA Ngolwazi oluneenkcukacha, bhekisa kuxwebhu lweSikhokelo sokuSebenza ngoNxibelelwano lweNdlela, olubekwe kwiThala leeNcwadi loBugcisa kwi-Unitronics' webindawo.

Ukufakela iNgcaciso yoMbane

Le modyuli ifuna unikezelo lwamandla lwangaphandle lwe-24VDC.

 

• I-0V ye-UIA-0402N kufuneka iqhagamshelwe kwiPhaneli ye-HMI's 0V. Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo.

Qhagamshela iitheminali ze-24V kunye ne-0V njengoko kubonisiwe kumzobo ohamba kunye.

Ukufakela ii-Inputs ze-Analog

• HAYI Amagalelo awawodwa.
• TE Igalelo ngalinye linika iindlela ezimbini: voltage okanye okwangoku. Unokuseta igalelo ngalinye ngokuzimeleyo. Imowudi imiselwa zombini nge
  iingcingo kunye noqwalaselo lwehardware ngaphakathi kwenkqubo yesoftware.
• Umqulutage kunye neendlela zangoku zisebenzisa amanqaku ahlukeneyo. Qhagamshela kuphela inqaku elinxulumene nemo ekhethiweyo; shiya elinye inqaku lingadityaniswanga
• Igalelo ngalinye linendawo yalo eqhelekileyo (CM0 ye-I0, njl.).

Umqulutage

Ukufakela iintambo kwiZiphumo zeAnalog

• HAYI Iziphumo azizodwa.
• TE Isiphumo ngasinye sibonelela ngeendlela ezimbini: umthamotage okanye okwangoku. Ungacwangcisa imveliso nganye ngokuzimeleyo. Imowudi imiselwa zombini ngocingo kunye noqwalaselo hardware ngaphakathi isicelo software.
• Umqulutage kunye neendlela zangoku zisebenzisa amanqaku ahlukeneyo. Qhagamshela kuphela inqaku elinxulumene nemo ekhethiweyo; shiya elinye inqaku lingadityaniswanga.
• Imveliso nganye ineendawo zayo eziqhelekileyo (i-CM4 ye-O0, i-CM5 ye-O1). Qhagamshela imveliso nganye ye-analog usebenzisa inqaku elihambelanayo leCM.
• Musa ukudibanisa i-CM4 okanye i-CM5 kwinkqubo ye-0V.
• Musa ukusebenzisa amanqaku CM4 okanye CM5 nayiphi na injongo ngaphandle kokudibanisa umthwalo wemveliso ye-analog. Ukuzisebenzisa ngayo nayiphi na enye injongo kungonakalisa imodyuli.

IiNgcaciso zobuGcisa

Esi sikhokelo sibonelela ngeenkcukacha zemodyuli ye-Unitronics' Uni-I/O™ UIA-0402N. Le modyuli iquka:

• 4 amagalelo analog, 13 bit
• 2 iziphumo analog, 13/14 bit

Iimodyuli ze-Uni-I/O ziyahambelana nosapho lwe-UniStream™ lwabaLawuli beNgcaciso abaCwangcisiweyo. Zisenokutsalwa ngasemva kwePaneli ye-HMI ye-UniStream ™ ecaleni kwe-CPU-ye-Panel ukwenza isilawuli se-HMI + PLC yonke-in-one, okanye ifakwe kuloliwe oqhelekileyo we-DIN usebenzisa i-Adapter yoKwandiswa kweNdawo.

Izikhokelo zoFakelo ziyafumaneka kwiThala leencwadi lobuGcisa le-Unitronics www.unitronics.com

Igalelo le-Analog
Inani lamagalelo	4
Uluhlu lokufaka (1) (2)	Uhlobo Longeniso	Iinqobo ezisemgangathweni		Iinqobo zoluhlu olugqithisileyo		Ukuphuphuma kwemilinganiselo
	0 ÷ 10VDC	0 ≤ Vin ≤ 10VDC		10 < Vin ≤ 10.15VDC		Vin > 10.15VDC
	0 ÷ 20mA	0 ≤ ku ≤ 20mA		20 < in ≤ 20.3mA		 kwi> 20.3mA
Ukulinganiswa okupheleleyo	±30V (Umqulutage), ±30mA (Okwangoku)
Ukubekwa wedwa	Akukho nanye
Indlela yokuguqula	Uqikelelo olulandelelanayo
Isigqibo	13 amasuntswana
Ukuchaneka (25°C / -20°C ukuya 55°C)	±0.3% / ±0.5% yesikali esipheleleyo (Voltage) ±0.3% / ±0.4% yesikali esipheleleyo (Okwangoku)
Ukungasebenzi kakuhle	552kΩ (Umqulutage), 118Ω (Okwangoku)
Ukwala ingxolo	10Hz, 50Hz, 60Hz, 400Hz
Inyathelo impendulo (3) (0 ukuya kwi-100% yexabiso lokugqibela)	Ukugudisa		Ukwala Ingxolo Frequency
			400Hz	60Hz	50Hz		10Hz
	Akukho nanye		2.7ms	16.86ms	20.2ms		100.2ms
	Ubuthathaka		10.2ms	66.86ms	80.2ms		400.2ms
	Phakathi		20.2ms	133.53ms	160.2ms		800.2ms
	Yomelele		40.2ms	266.86ms	320.2ms		1600.2ms
Ixesha lokuhlaziya (3)	Ukwala Ingxolo Frequency				Ixesha lokuhlaziya
	400Hz				1.25ms
	60Hz				8.33ms
	50Hz				10ms
	10Hz				50ms
Uluhlu lwesignali yokusebenza (umqondiso + indlela eqhelekileyo)	Umqulutagimowudi ye-e – xV: -1V ÷ 12.5V ; CMx: -1V ÷ 2.5V Indlela yangoku – x: -1V ÷ 2.8V ; CMx: -1V ÷ 0.4V ( x=0,1,2 okanye 3 )
Imowudi eqhelekileyo ukwaliwa	30dB @ 10Hz, 50Hz, 60Hz okanye 400Hz indlela yokwala ingxolo
Ukwaliwa kwendlela eqhelekileyo	60dB @ 10Hz, 50Hz okanye 60Hz indlela yokwala ingxolo 45dB @ 400Hz imowudi yokwala ingxolo
Intambo	Isibini esijijekileyo esikhuselekileyo
Ukuxilongwa (4)	Ukuphuphuma kwegalelo leAnalog

Iziphumo zeAnalog
Inani leziphumo	2
Uluhlu lwemveliso (2)	Uhlobo Lwemveliso	Iinqobo ezisemgangathweni	Iinqobo zoluhlu olugqithisileyo	Ukuphuphuma kwemilinganiselo
	0÷10VDC	0≤Vout≤10VDC	10	IVout>10.15VDC
	-10÷10VDC	-10≤Vout≤10VDC	-10.15Vout<-10VDC 10	UVout<-10.15VDC IVout>10.15VDC
	0÷20mA	0≤ngaphandle≤20mA	20≤ngaphandle≤20.3mA	 ngaphandle>20.3mA
	4÷20mA	4≤ngaphandle≤20mA	20≤ngaphandle≤20.3mA	 ngaphandle>20.3mA
Ukubekwa wedwa	Akukho nanye
Isigqibo	0 ÷ 10VDC - 14 bit -10 ÷ 10VDC - 13 bit + uphawu 0 ÷ 20mA - 13 bit 4 ÷ 20mA - 13 bit
Ukuchaneka (25°C /-20°C ukuya kuma-55°C)	±0.3% / ±0.5% yesikali esipheleleyo (Voltage) ±0.5% / ±0.7% yesikali esipheleleyo (Okwangoku)
Layisha impedance	Umqulutage – 2kΩ ubuncinci Okwangoku – 600Ω ubuninzi
Ixesha lokumisa (95% yexabiso elitsha)	0 ÷ 10VDC - 1.8ms (2kΩ umthwalo ochasayo), 3.7ms (2kΩ + 1uF umthwalo) -10 ÷ 10VDC - 3ms (2kΩ umthwalo ochasayo), 5.5ms (2kΩ + 1uF umthwalo) 0 ÷ 20mA kunye ne-4 ÷ 20mA - 1.7ms (600Ω umthwalo), 1.7ms (600Ω + 10mH umthwalo)
Intambo	Isibini esijijekileyo esikhuselekileyo
Ukuxilongwa (4)	Umqulutage – Isekethe emfutshane Okwangoku - Vula isekethe

Ukunikezwa Amandla
Umthamo wokusebenza ngegamatage	24VDC
Ukusebenza ivoltage	20.4 ÷ 28.8VDC
Ubuninzi bokusetyenziswa kwangoku	150mA @ 24VDC
Ukuxilongwa (4)	Inqanaba lobonelelo: Eliqhelekileyo / liphantsi okanye elilahlekileyo.

IO/COM Ibhasi
Ukusetyenziswa kwebhasi yangoku	120mA ubuninzi

Iimpawu ze-LED
Igalelo le-LEDs	Bomvu	Vuliwe: Ixabiso legalelo liku-Okuphuphumayo
Ii-LED zemveliso	Bomvu	Vula: Isekethe emfutshane (xa imiselwe ku-Voltage mode) Vula iSekethe (xa imiselwe kwimo yangoku)
Imeko ye-LED	Umbala wesithathu we-LED. Iimpawu zezi zilandelayo:
	Umbala	Umbuso we-LED	Ubume
	Luhlaza	On	Ukusebenza ngokuqhelekileyo
		Ukuqhwanyaza kancinci	Bhuqa
		Ukuqhwanyaza ngokukhawuleza	Ukuqaliswa kwe-OS
	Luhlaza/Bomvu	Ukuqhwanyaza kancinci	Ukungafani kobumbeko
	Bomvu	On	Ukubonelela ngevoltagi-e iphantsi okanye ayikho
		Ukuqhwanyaza kancinci	Akukho tshintshiselwano lwe-IO
		Ukuqhwanyaza ngokukhawuleza	Impazamo yonxibelelwano
	Orenji	Ukuqhwanyaza ngokukhawuleza	Uphuculo lwe-OS

Okusingqongileyo
Ukhuseleko	IP20, NEMA1
Ubushushu bokusebenza	-20°C ukuya ku-55°C (-4°F ukuya ku-131°F)
Ubushushu bokugcina	-30°C ukuya ku-70°C (-22°F ukuya ku-158°F)
Ukufuma okuzalanayo (RH)	5% ukuya kwi-95% (engacondensing)
Ukuphakama kokusebenza	2,000 m (6,562 ft)
Umothuko	IEC 60068-2-27, 15G, 11ms ubude bexesha
Ukungcangcazela	IEC 60068-2-6, 5Hz ukuya 8.4Hz, 3.5mm rhoqo amplitude, 8.4Hz ukuya 150Hz, 1G isantya

Imilinganiselo
Ubunzima	0.15 kg (0.331 lb)
Ubungakanani	Jonga kwimifanekiso engezantsi

Phezulu View

Icala View

Ngaphambili View

Amanqaku:

1. I-4-20mA inketho yokufaka iphunyezwa ngokusebenzisa i-0-20mA yoluhlu lwegalelo.
2. I-UIA-0402N ilinganisa amaxabiso afikelela kwi-1.5% ephezulu kunoluhlu lwegalelo eliqhelekileyo (okt Input Over-range). Ngokufanayo, iya kukwazi ukuvelisa amaxabiso afikelela kwi-1.5% ephezulu kunoluhlu lwemveliso yegama (Output Over-range) .Qaphela ukuba xa igalelo liphuphuma, liboniswa kwinkqubo ehambelanayo tag ngelixa ixabiso legalelo libhalisiwe njengexabiso eliphezulu elivumelekileyo. Umzekeloample, ukuba uluhlu lwegalelo elikhankanyiweyo yi-0–10V, amaxabiso angaphezulu koluhlu anokufikelela ukuya kuthi ga kwi-10.15V, kunye naliphi na igalelo lomthamotagengaphezulu kunoko isaya kubhaliswa njenge-10.15V ngelixa inkqubo yokuPhuma tag ilayitiwe.
3. Inyathelo lokuphendula kunye nexesha lokuhlaziya lizimeleyo kwinani leziteshi ezisetyenziswayo.
4. Jonga iZalathisi ze-LED kwiTheyibhile engentla ngenkcazo yezalathisi ezifanelekileyo. Qaphela ukuba iziphumo zoxilongo zikwabonisiwe kwisistim tags kwaye inokubonwa nge-UniApps™ okanye imo ye-intanethi ye-UniLogic™.

Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike.

Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungophulwa komthetho. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi.

Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo.

Amaxwebhu / Izibonelelo

UNITRONICS UIA-0402N Uni-Input-Output Modules [pdf] Isikhokelo somsebenzisi UIA-0402N Uni-Input-Output Modules, UIA-0402N, Uni-Input-Output Modules, iInput-output Modules, iimodyuli zokuphuma, iimodyuli

Iimbekiselo

• Incwadi yokusebenzisa