Ulwazi lweMveliso

Iimodyuli ze-Uni-I / OTM ziyintsapho yeemodyuli ze-Input / Output ezihambelana ne-platform yokulawula ye-UniStreamTM. Zingasetyenziswa ngokubambisana nabalawuli be-CPU kunye neepaneli ze-HMI ukwenza i-All-in-one Programmable Logic Controller (PLC). Iimodyuli ezikhoyo zi-UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, kunye ne-UID-0016T. Iinkcukacha zobugcisa zinokukhutshelwa kwi-Unitronics webindawo.

Ukuhlohla
Ukufakela iimodyuli ze-Uni-I/OTM:

1. Ngasemva kwayo nayiphi na iPaneli ye-HMI ye-UniStream TM equka i-CPU-for-Panel.
2. Kwi-DIN-umzila, usebenzisa iKhithi yoKwandiswa kweNdawo.

Inani eliphezulu leemodyuli ze-Uni-I/OTM ezinokudityaniswa kumlawuli omnye we-CPU zilinganiselwe. Ukufumana iinkcukacha ezingaphezulu, nceda ubhekisele kumaphepha enkcazo ye-UniStream TM CPU okanye nayiphi na i-Kits yeNdawo yoKwandiswa kweeNdawo ezifanelekileyo.

Ngaphambi kokuba Uqale
Ngaphambi kokufaka isixhobo, isifakeli kufuneka:

• Funda kwaye uqonde isikhokelo somsebenzisi.
• Qinisekisa imixholo yekhithi.

Iimfuno zokhetho lofakelo
Ukuba uhlohla imodyuli ye-Uni-I/O™ kwi:

• Iphaneli ye-HMI ye-UniStream™; iPaneli kufuneka iqulathe i-CPU-for-Panel, efakwe ngokwe-CPU-for-Panel isikhokelo sokufakela.
• I-DIN-kaloliwe; kufuneka usebenzise iKhithi yoKwandiswa kweNdawo, ekhoyo ngeodolo eyahlukileyo, ukudibanisa iimodyuli ze-Uni-I/O™ kwi-DIN-umzila kaloliwe kwisixokelelwano solawulo se-UniStream™.

Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ezihambelana nazo ulwazi ngononophelo:

Uphawu	Intsingiselo	Inkcazo
	Ingozi	Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi.
	Isilumkiso	Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi.
Isilumkiso	Isilumkiso	Lumka.

• Zonke exampi-les kunye nemizobo yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi examples.
• Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe.
• Le mveliso kufuneka ifakwe kuphela ngabasebenzi abaqeqeshiweyo.
• Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati.
  Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
  Musa ukuqhagamshela/uqhawule uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo
Xa ufaka iimodyuli ze-Uni-I/OTM, qwalasela i okulandelayo:

• Ukungenisa umoya: I-10mm (0.4) yendawo iyafuneka phakathi komphezulu wesixhobo kunye neendonga ezisezantsi kunye neendonga zoluvalo.
• Musa ukufaka kwiindawo ezinothuli olugqithisileyo okanye oluqhubekileyo, irhasi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho kunye nemida enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Imixholo yeKit

• 1 imodyuli ye-Uni-I/OTM
• Iibhloko ze-terminal ezi-4 ze-I/O (ezi-2 ezimnyama nezi-2 ezingwevu)
• Iiklip ze-DIN-kaloliwe ezi-1

Uni-I/O™ Idayagram

1	Iikliphu ze-DIN-kaloliwe	Ukubonelela ngenkxaso yomzimba kwi-CPU kunye neemodyuli. Kukho iziqeshana ezimbini: enye phezulu (ibonisiwe), enye isezantsi (engaboniswanga).
2	Mna / Os	Amanqaku oqhagamshelwano lwe-I/O
3
4	I/O Ibhasi – Ekhohlo	Icala lasekhohlo Isidibanisi
5	Isitshixo sokuQhagamshelwa kwebhasi	Slayida iSitshixo sesiQhagamshelwano seBhasi ngasekhohlo, ukudibanisa ngombane imodyuli ye-Uni-I/O™ kwi-CPU okanye imodyuli esecaleni.
6	I/O Ibhasi – Ekunene	Isidibanisi secala lasekunene, sithunyelwe sigqunyiwe. Shiya igqunyiwe xa ingasetyenziswa.
	I-Bus Connector Cover
7	Mna / Os	Amanqaku oqhagamshelwano lwe-I/O
8

9	Ii-LED ze-I/O	Ii-LED eziluhlaza
10
11	Imeko ye-LED	I-Tricolor LED, eluhlaza / ebomvu / e-Orenji

12	Umnyango wemodyuli	Ithunyelwe ngenqanawa igqunywe ngeteyiphu yokukhusela ukuthintela ucango ukuba ungakrwelwa. Susa iteyiphu ngexesha lofakelo.
13	Screw imingxuma	Yenza ukufakwa kweephaneli umngxuma ububanzi: 4mm (0.15”).

PHAWULA :Jonga kwiphepha lengcaciso yemodyuli yezalathisi ze-LED.

Malunga neziQhagamshelwano zeBhasi ze-I/O
Izixhumi zebhasi ze-I / O zibonelela ngamanqaku okudibanisa ngokomzimba kunye nombane phakathi kweemodyuli. Isidibanisi sithunyelwa sigutyungelwe sikhuselo esikhuselayo, sikhusela ikhonkco kwi-debris, umonakalo, kunye ne-ESD. I-I/O Bus – Ekhohlo (#4 kumzobo) inokudityaniswa nokuba yi-CPU-for-Panel, imodyuli yoNxibelelwano ye-Uni-COM™, kwenye imodyuli ye-Uni-I/O™ okanye kwiYunithi yokuGqibela yeNdawo. Ukwandiswa kweKit. I-I / O Ibhasi - Ekunene (#6 kumzobo) inokudityaniswa kwenye imodyuli ye-I / O, okanye kwiCandelo leSiseko seNdawo yoKwandiswa kweNdawo.
Isilumkiso :Ukuba imodyuli ye-I / O ifumaneka ekugqibeleni kuqwalaselo, kwaye akukho nto iza kudibaniswa nayo, musa ukuyisusa i-Bus Connector Cover yayo.

Ukuhlohla

• Cima amandla enkqubo phambi kokudibanisa okanye ukuqhawula nayiphi na iminqongo okanye izixhobo.
• Sebenzisa izilumkiso ezifanelekileyo ukukhusela i-Electro-Static Discharge (ESD).

Ukuhlohla iModyuli ye-Uni-I/O™ kwiPhaneli ye-HMI ye-UniStream™
PHAWULA: Ulwakhiwo lodidi lwe-DIN-kaloliwe ngasemva kwendawo yolawulo lubonelela ngenkxaso ebonakalayo kwimodyuli ye-Uni-I/O™.

1. Jonga iyunithi oza kuqhagamshela kuyo imodyuli ye-Uni-I/O™ ukuqinisekisa ukuba isiQhagamshelwano saso seBhasi asigqunywanga. Ukuba imodyuli ye-Uni-I/O™ iya kuba yeyokugqibela kuqwalaselo, musa ukususa isigqubuthelo seSiqhagamshelo seBhasi ye-I/O – Ekunene.
2. Vula ucango lwemodyuli ye-Uni-I/O™ kwaye uyibambe njengoko kubonisiwe kumzobo ohamba nalo.
3. Sebenzisa amatonela aphezulu nasezantsi (ulwimi & nomjelo) ukutyibilikisa imodyuli ye-Uni-I/O™ endaweni.
4. Qinisekisa ukuba iikliphu zikaloliwe zeDIN ezibekwe phezulu nasezantsi kwimodyuli ye-Uni-I/O™ ziye zangena kwi-DIN-rail.
5. Slayida isiQhagamshelwano seBhasi yonke indlela ukuya ekhohlo njengoko kubonisiwe kumzobo ohamba neli phepha.
6. Ukuba sele kukho imodyuli ebekwe ngasekunene kwayo, gqibezela uqhagamshelo ngokutyixa isitshixo soQhagamshelwano lweBhasi yeyunithi esecaleni ukuya ekhohlo.
7. Ukuba imodyuli yeyokugqibela kuqwalaselo, shiya i-I/O isidibanisi sebhasi sigqunyiwe.

Ukususa iModyuli

1. Cima amandla enkqubo.
2. Nqamula iitheminali ze-I/O (#2,3,7,8 kumzobo).
3. Susa uqhagamshelwano lwemodyuli ye-Uni-I/O™ kwiiyunithi ezimeleneyo: tyibilikisa iSitshixo sesiQhagamshelwano seBhasi ekunene. Ukuba kukho iyunithi ebekwe ekunene kwayo, tyibela isitshixo sale modyuli ekunene ngokunjalo.
4. Kwimodyuli ye-Uni-I/O™, tsala ikliphu ephezulu kaloliwe ye-DIN phezulu kunye nekliphu esezantsi ezantsi.
5. Vula ucango lwemodyuli ye-Uni-I/O™ kwaye uyibambe ngeminwe emibini njengoko kubonisiwe kumfanekiso okwiphepha lesi-3; uze uyitsale ngononophelo kwindawo yayo.

Ukufakela iimodyuli ze-Uni-I/O™ kwi-DIN-rail
Ukunyusela iimodyuli kwi-DIN-rail, landela amanyathelo 1-7 ekufakeni iModyuli ye-Uni-I/O™ kwiPhaneli ye-UniStream™ HMI kwiphepha lesi-3. Ukuze udibanise iimodyuli kumlawuli we-UniStream™, kufuneka usebenzise Ikhithi yoKwandiswa kwendawo. Ezi zixhobo ziyafumaneka kunye nangaphandle kwezixhobo zombane, kunye neentambo zobude obahlukeneyo. Ngolwazi olupheleleyo, nceda ujonge kwisikhokelo sofakelo seKhithi yoKwandiswa kweNdawo efanelekileyo.

Iimodyuli zamanani
Unganombola iimodyuli ngeenjongo zereferensi. Iseti yezitikha ezingama-20 zibonelelwa nge-CPU-for-Panel nganye; sebenzisa ezi zincamathelisi ukufaka iinombolo kwiimodyuli.

• Iseti iqulethe izitikha ezinenombolo nezingenanto njengoko kubonisiwe kumfanekiso ongasekhohlo.
• Zibeke kwiimodyuli njengoko kubonisiwe kumfanekiso osekunene.

Ukuthotyelwa kwe-UL

Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL.
Le mizekelo ilandelayo: I-UIA-0006, i-UID-0808R, i-UID-W1616R, i-UIS-WCB1 i-UL idweliswe kwiiNdawo ezinobungozi.
Le mizekelo ilandelayo: UIA-0006, UIA-0402N, UIA-0402NL, UIA-0800N,UID-0016R,
UID-0016RL,UID-0016T,UID-0808R,UID-0808RL,UID-0808T,UID-0808THS, UID-0808THSL, UID-0808TL, UID-1600, UID-1600L, UID-1616WID-W1616 UID-04WID-W04 I-08PTKN, i-UIS-1PTN, i-UIS-2TC, i-UIS-WCBXNUMX, i-UIS-WCBXNUMX zi-UL ezidweliswe kwiNdawo eqhelekileyo.

Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D
La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.

Isilumkiso

• Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingezizo ezinobungozi kuphela.
• I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
• ISILUMKISO: Ingozi yokuqhushumba-ukutshintshwa kwamalungu kunokuphazamisa ukufaneleka kweKlasi I, iCandelo lesi-2.
• INGOZI YOKUQHUBEKA - Musa ukudibanisa okanye ukuqhawula izixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo yaziwa ngokuba ayinabungozi.
• Ukuvezwa kwezinye iikhemikhali kunokuthoba iimpawu zokutywina zemathiriyeli esetyenziswa kwiiRelay.
• Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.

UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, UID-0016T Isikhokelo 

Iintambo

• Esi sixhobo senzelwe ukusebenza kuphela kwi-SELV/PELV/Class 2/Limited Power environments.
• Zonke izixhobo zombane kwinkqubo kufuneka zibandakanye ukugquma kabini. Iziphumo zonikezelo lwamandla kufuneka zilinganiswe njenge-SELV/PELV/Class 2/Limited Power.
• Sukuqhagamshela nokuba yi-'Neutral' okanye 'Layini' isignali ye-110/220VAC kwindawo ye-0V yesixhobo.
• Musa ukubamba iingcingo eziphilayo.
• Yonke imisebenzi yokufaka iintambo kufuneka yenziwe ngelixa umbane LUVALIWE.
• Sebenzisa ukhuseleko lwangoku, olufana ne-fuse okanye i-breaker circuit, ukunqanda imisinga egqithisileyo kwimodyuli ye-Uni-I/O™.
• Amanqaku angasetyenziswanga akufanele adityaniswe (ngaphandle kokuba kuchazwe ngenye indlela). Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
•  Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.

Isilumkiso

• Ukuze ugweme ukonakalisa ucingo, sebenzisa i-torque ephezulu ye-0.5 N · m (5 kgf·cm).
• Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Inkqubo yocingo
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm2 -3.31 mm2).

1. Hlubula ucingo ukuya kubude be-7±0.5mm (0.250-0.300 intshi).
2. Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
3. Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
4. Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.

Amanqaku oQhagamshelwano lweModyuli ye-Uni-I/O™
Yonke imizobo yocingo kunye nemiyalelo kolu xwebhu ibhekisa kwiindawo zokudityaniswa kwe-I/O kwiimodyuli ezahlukeneyo. Ezi zicwangciswe ngokwamaqela amane anamanqaku asixhenxe ngalinye, njengoko kubonisiwe kumanani angezantsi.

Izikhokelo zocingo
Ukuqinisekisa ukuba isixhobo siya kusebenza ngokufanelekileyo kwaye sithintele ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabhinethi yentsimbi. Qinisekisa ukuba ikhabhinethi kunye neengcango zayo zinomhlaba ngokufanelekileyo.
• Sebenzisa iingcingo ezinobungakanani obufanelekileyo bomthwalo.
• Hambisa umqondiso we-I/O nganye ngocingo oluzinikeleyo oluqhelekileyo. Xhuma iingcingo eziqhelekileyo kwiindawo zazo eziqhelekileyo (CM) kwimodyuli ye-I/O.
• Ngokukodwa qhagamshela indawo nganye ye-0V kwisistim ukuya kumbane we-terminal ye-0V.
• Ngokukodwa qhagamshela indawo nganye yomhlaba esebenzayo ( ) kumhlaba wenkqubo
  (ngokukhethekileyo kwi-chassis yekhabhathi yentsimbi). Sebenzisa ezona ngcingo zimfutshane nezingqindilili kangangoko kunokwenzeka: ngaphantsi kwe-1m (3.3') ngobude, ubukhulu obuncinane yi-14 AWG (2 mm2).
• Qhagamshela unikezelo lwamandla 0V kumhlaba wenkqubo.

PHAWULA: Ngolwazi oluneenkcukacha, bhekisa kuxwebhu lweSikhokelo sokuSebenza ngoNxibelelwano lweNdlela, olubekwe kwiThala leeNcwadi loBugcisa kwi-Unitronics' webindawo.

Ukufakwa kweeNcingo kwiiNgeniso: UID-0808R, UID-0808T, UID-1600

UID-0808R
Amagalelo acwangciswe ngokwamaqela amabini awodwa:

UID-0808T

• I0-I3 yabelana ngeCM0 eqhelekileyo
• I4-I7 yabelana ngeCM1 eqhelekileyo

UID-1600
Amagalelo acwangciswe ngokwamaqela amane awodwa:

• I0-I3 yabelana ngeCM0 eqhelekileyo
• I4-I7 yabelana ngeCM1 eqhelekileyo
• I8-I11 yabelana ngeCM2 eqhelekileyo
• I12-I15 yabelana ngeCM3 eqhelekileyo

Iqela ngalinye legalelo linokuthi lifakwe iingcingo njenge sinki okanye umthombo. Faka ucingo kwiqela ngalinye ngokwala manani angezantsi.

PHAWULA

• Sebenzisa i-sink input wiring ukudibanisa isixhobo sokukhangela (pnp).
• Sebenzisa umthombo wokufakwa kweengcingo ukuqhagamshela isixhobo esizikayo (npn).

Ukufakwa kweeNgxelo kwi-UID-0808THS
Amagalelo acwangciswe ngokwamaqela amabini awodwa:

• I0-I3 yabelana ngeCM0 eqhelekileyo
• I4-I7 yabelana ngeCM1 eqhelekileyo

Iqela ngalinye linokuthi lifakwe iingcingo njenge sinki okanye umthombo. Amagalelo i-I0, i-I1, i-I4, kunye ne-I5 inokuqwalaselwa njengamagalelo aqhelekileyo edijithali okanye njengamagalelo esantya esiphezulu anokufumana izibonakaliso zesantya esiphezulu kwi-sensors okanye ii-encoders ze-shaft.

• Amagalelo i-I2, i-I3, i-I6 kunye ne-I7 inokusebenza kuphela njengamagalelo aqhelekileyo edijithali.

Iindlela zokuNgena ngesantya esiphezulu
Okulandelayo yizabelo zephini ezahlukeneyo zeetshaneli zesantya esiphezulu:

	Ijelo 1			Ijelo 2
	I0	I1		I4	I5
Iquadrature	Isigaba A	Isigaba B		Isigaba A	Isigaba B
Pulse/Direction	Ukubetha	Isalathiso		Ukubetha	Isalathiso

PHAWULA

• Iimowudi zongeniso zisetwa zombini ngocingo kunye nesoftware.
• Xa uqhagamshela imithombo ye-pulse ngaphandle komqondiso wesalathiso, shiya i-pin ye-directional ingaxhunyiwe. Qaphela ukuba kolu lungelelwaniso, iphini lomkhombandlela ayinakusetyenziswa njengegalelo eliqhelekileyo.

PHAWULA

• Sebenzisa i-sink input wiring ukudibanisa isixhobo sokukhangela (pnp).
• Sebenzisa umthombo wokufakwa kweengcingo ukuqhagamshela isixhobo esizikayo (npn).

Ii-Wiring Relay Outputs: UID-0808R, UID-0016R
Unikezelo lwamandla ophumayo
Iziphumo zokudluliselwa zifuna umbane wangaphandle we-24VDC. Qhagamshela iitheminali ze-24V kunye ne-0V njengoko kubonisiwe kumzobo ongezantsi.

• Ukuze ugweme ingozi yomlilo okanye umonakalo wepropathi, sebenzisa rhoqo umthombo okhoyo olinganiselweyo okanye uqhagamshele isixhobo sangoku sokunciphisa uchungechunge kunye nabafowunelwa be-relay.
• I-0V yemodyuli kufuneka iqhagamshelwe kwiPhaneli yeHMI's 0V. Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela imodyuli kunikezelo lwamandla olulawulwayo.

UID-0808R

Iziphumo zicwangciswe ngokwamaqela amabini awodwa:

• O0-O3 isabelo eqhelekileyo CM2
• O4-O7 isabelo eqhelekileyo CM3

UID-0016R
Iziphumo zicwangciswe ngokwamaqela amane awodwa:

• O0-O3 isabelo eqhelekileyo CM0
• O4-O7 isabelo eqhelekileyo CM1
• O8-O11 isabelo eqhelekileyo CM2
• O12-O15 isabelo eqhelekileyo CM3

Faka ucingo kwiqela ngalinye ngokomfanekiso ohamba nalo.

Ukwandisa ubomi boqhagamshelwano
Ukonyusa ubude bobomi babafowunelwa bokudluliselwa kunye nokukhusela imodyuli kumonakalo onokubakho nge-EMF ebuyela umva, qhagamshela:

• a clamping diode ngokunxuseneyo nomthwalo ngamnye we-DC osebenzayo.
• isekethe ye-RC snubber ngokunxuseneyo nomthwalo ngamnye we-AC inductive.

Ii-Wiring Transistor Outputs: UID-0808T, UID-0016T
Unikezelo lwamandla ophumayo
Ukusetyenziswa kwazo naziphi na iziphumo kufuna unikezelo lwamandla lwangaphandle lwe-24VDC njengoko kubonisiwe kumzobo ohamba kunye.

• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo.

Iziphumo
Qhagamshela iitheminali ze-24V kunye ne-0V njengoko kubonisiwe kumzobo ohamba kunye.

UID-0808T
O0-O7 isabelo imbuyekezo eqhelekileyo 0V

UID-0016T
O0-O15 isabelo imbuyekezo eqhelekileyo 0V

Ukufakwa kweeNcingo kwiZiphumo ze-UID-0808THS Ubonelelo lwamandla ombane 

• Ukusetyenziswa kwazo naziphi na iziphumo kufuna unikezelo lwamandla lwangaphandle lwe-24VDC njengakumfanekiso ohamba nale.
• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo.

Iziphumo 

• Qhagamshela isixhobo sangoku sokunciphisa kuthotho kunye neziphumo ze-O0 kunye ne-O1. Iziphumo ze-O2 ukuya kwi-O7 zikhuselwe kwi-short-circuit.
• Iziphumo ze-O0 kunye ne-O1 zinokuqwalaselwa njengeziphumo eziqhelekileyo zedijithali okanye njengemveliso yesantya esiphezulu se-PWM.
• Iziphumo ze-O4 kunye ne-O5 zinokuqwalaselwa njengeziphumo eziqhelekileyo zedijithali okanye njengeziphumo eziqhelekileyo ze-PWM.

Jonga kwiphepha lenkcazo ngolwazi oluneenkcukacha malunga neentlobo zemveliso ye-PWM.

• Iziphumo ze-O2, i-O3, i-O6 kunye ne-O7 zinokusebenza kuphela njengeziphumo eziqhelekileyo zedijithali.
• Okulandelayo yizabelo zephini ezahlukeneyo zamajelo e-PWM:

	Ijelo 1			Ijelo 2
	O0	O1		O4	O5
PWM, imveliso enye	PWM	iDijithali eqhelekileyo		PWM	iDijithali eqhelekileyo
PWM, iziphumo ezimbini	PWM	PWM		PWM	PWM

Isantya esiphezulu sePWM Iziphumo
Sebenzisa intambo ekhuselweyo kwi-wiring ye-O0 okanye i-O1 xa zisetelwe ukuba zisebenze njengeziphumo ze-PWM eziPhakamileyo.

Isilumkiso 

• Ukuba Iziphumo ze-O0 kunye ne-O1 ziza kusebenza njengemveliso enesantya esiphezulu, zidibanise usebenzisa i-CM2. Musa ukudibanisa i-CM2 kwinkqubo ye-0V.

Ubungakanani

Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike. Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungonaki. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi. Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kuquka noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo

I-Uni-I/O™ lusapho lweemodyuli zeNgeniso/IziPhumo ezihambelana neqonga lolawulo le-UniStream™.
Esi sikhokelo sibonelela ngolwazi olusisiseko lofakelo lweemodyuli ze-UID-0808R, UID-0808T, UID-0808THS, UID-1600, UID-0016R, kunye ne-UID-0016T. Iinkcukacha zobugcisa zinokukhutshelwa kwi-Unitronics webindawo. Iqonga le-UniStream™ liquka abalawuli be-CPU, iiphaneli ze-HMI, kunye neemodyuli ze-I/O zasekuhlaleni ezithi xubana zenze i-All-in-one Programmable Logic Controller (PLC).

Faka iimodyuli ze-Uni-I/O™: 

• Ngasemva kwayo nayiphi na iPaneli ye-HMI ye-UniStream™ equka i-CPU-for-Panel.
• Kwi-DIN-umzila, usebenzisa iKhithi yoKwandiswa kweNdawo.

Elona nani likhulu leemodyuli ze-Uni-I/O™ ezinokudityaniswa kumlawuli omnye we-CPU zilinganiselwe. Ukufumana iinkcukacha, nceda ujonge kumaphepha acacisiweyo eUniStream™ CPU okanye naziphi na iiKits ezifanelekileyo zeNdawo zoKwandiswa.