UMRHWEBI DIMPBD Push Iqhosha Lomyalelo Manual

UMRWEBI DIMPBD Iqhosha lokucofa

Imiyalelo yokuFakela

IMIYALELO YOKUFAKA

• ISILUMKISO: I-DIMPBD kufuneka ifakwe ngusombane oqeqeshiweyo njengenxalenye yofakelo lombane olusisigxina.
• I-WIRING: Qhagamshela i-DIMPBD ngokomzobo wocingo onikiweyo. Qinisekisa uqhagamshelo olululo kumgca wokude, umthwalo, kunye neengcingo ezingathathi hlangothi.
• DERATING: Landela izikhokelo zokunciphisa ngokusekwe kwiqondo lobushushu le-ambient kunye nenani lee-dimmers ezisetyenziswayo ukunqanda ukushisa okugqithisileyo.

Imiyalelo yokusebenza

IMIYALELO YOKUSEBENZA

• VULA / VIMA UKUTSHINTSHA: Sebenzisa iqhosha ukuvula okanye ukucima i-dimmer.
• UKUFINZA: Lungisa inqanaba lobumnyama ngokucofa kwaye ubambe iqhosha.
• UKUBEKA Obona UBANGAPHANTSI BUKUKHANYA: Lungisa ubuncinci bokuseta ukuqinisekisa ukusebenza ngokufanelekileyo kwe-lamps.

Iindlela zokuSebenza
Ukuseta imo yokusebenza, landela la manyathelo

1. Bamba iqhosha phantsi imizuzwana eyi-10 de isalathisi se-LED siqale ukudanyaza.
2. Khupha iqhosha.
3. Khetha imo yokusebenza efunekayo ngokucofa iqhosha elisekelwe kwitafile enikiweyo.

Imibuzo Ebuzwa Rhoqo (FAQ)

• Umbuzo: Ngaba i-DIMPBD dimmer ingasetyenziswa ngaphandle?
  
  • A: Hayi, i-DIMPBD dimmer yenzelwe ukusetyenziswa kwangaphakathi kuphela kwaye akufanele ifakwe ngaphandle.
• Umbuzo: Ndingenza ntoni ukuba i-lamps iflicker kwiseto zokukhanya okuphantsi?
  
  • A: Lungisa ubuncinci ukusetwa kwinqanaba eliphezulu ukunqanda ukudanyaza nokuqinisekisa i-l eyiyoamp ukusebenza.

IIMBONAKALO

• I-DIMPBD Push Button Digital Dimmer kunye ne-ON/OFF switsha kwenye - igqibelele kwi-LED ecimayo
• UDimming weNdlela ezininzi kunye ON/OFF usebenzisa i-MEPBMW Cofa iQhosha leNdlela ezininzi
• Uluhlu olubanzi - UDimming olunzulu ukuya kuZero kuninzi lamps
• Cofa kabini xa IVALIWE - izibane ziyancipha ukuya IVIMA ngaphezulu kwemizuzu engama-30
• Cofa kabini xa IVALIWE - vula izibane kwinqanaba langaphambili kunye ne-ramps ukuya kukukhanya okugcweleyo ngaphezulu kwemizuzu engama-30
• Ukuphuculwa kohluzo lwethoni yeripple enelungelo elilodwa lomenzi
• I-Rugged-Ngaphezu kwangoku, Ngaphezulu kweVoltage kunye noKhuseleko loBubushushu obungaphezulu
• I-LED ekhanyayo - iyalungiseka
• Iphinda iValiwe kwaye igcine useto emva kokuphulukana nombane
• I-Trailing Edge iba luzizi kunye nempendulo yomgama
• Ubuncinci bokuqaqamba obucwangcisekileyo
• Ilungele zombini i-Trader kunye neClipsal * iipleyiti zodonga - amaqhosha afakiwe
• AYIZIFANELEKILEYO IFAN NEMOTO

IMIQATHANGO YOKUSEBENZA

• Umsebenzi weVoltage: 230-240Va.c. 50Hz
• Ubushushu bokusebenza: 0 ukuya +50 °C
• Umgangatho oqinisekisiweyo: AS/NZS 60669.2.1, CISPR15
• Ubuninzi bomthwalo: 350W
• Ubuncinci bomthwalo: 1W
• Obona bukhulu besakhono sangoku: 1.5A
• Uhlobo loQhagamshelwano: Ukuhamba ngeenqwelomoya ezineetheminali zebootlace

Phawula: Ukusebenza kwiqondo lobushushu, voltage okanye ukulayisha ngaphandle kweenkcukacha kunokubangela umonakalo osisigxina kwiyunithi.

UKUHAMBELWA KOMTHETHO

1. Jonga ku-lamp izikhokelo zomenzi.
2. Iyahambelana ne-Atco & Clipsal* iziguquli xa zilayishwe ubuncinane kwi-75% yemveliso yazo elinganisiweyo.

IMIYALELO YOKUFAKA

ISILUMKISO: I-DIMPBD iza kufakwa njengenxalenye yofakelo lombane olusisigxina. Ngokomthetho olo fakelo kufuneka lwenziwe ngunokontraka wombane okanye umntu oneziqinisekiso ezifanayo.

PHAWULA: Isixhobo esifumaneka ngokulula sokuqhawula, njengohlobo lwe-C 16A i-circuit breaker iya kufakwa ngaphandle kwimveliso.

• Akukho ngaphezu kwedimmer enye inokudityaniswa kwi-l efanayoamp.
• Ukwenza ubumnyama beNdlela ezininzi kunye no-ON/OFF sebenzisa iQhosha lokucofa le-MEPBMW.

I-WIRING

• Susa umbane kwi-breaker circuit phambi kwawo nawuphi na umsebenzi wombane.
• Fakela i-DIMPBD ngokomzobo wocingo kumfanekiso ongezantsi.

• Cofa iqhosha kwi-DIMPBD. Qinisekisa ukuba iqhosha lilungelelaniswe ukuze umbhobho wokukhanya we-LED ulungelelaniswe nomngxuma kwiqhosha, ngaphambi kokuba unamathele kwipleyiti yodonga.
• Faka isincamathelisi somyalelo emva kwepleyiti yodonga.
• Phinda uqhagamshele umbane kwisaphuli sesekethe uze uncamathelise iSilumkiso seSixhobo seSixhobo esiQinisekileyo kwi-switchboard.

PHAWULA: I-DIMPBD yenzelwe ukusetyenziswa ngaphakathi. Ayinikwanga umlinganiselo wofakelo lwangaphandle. Ukuba i-dimmer ikhululekile kwi-wall plate, i-wall plate kufuneka itshintshwe.

DERATING

• Kubushushu obuphezulu be-ambient, umlinganiselo ophezulu womthwalo uyancitshiswa ngokwetheyibhile engezantsi.
• Ukuba ii-dimmers ezininzi ziseplani yodonga, umlinganiselo ophezulu womthwalo uyancipha ngokwetheyibhile engezantsi.

AMBIENT UBUNGQONGQOSHE	Ubukhulu layisha
25°C	100%
50°C	75%

NUMBER OF UKUQINISA	Ubukhulu layisha PER YENZA
1	100%
2	75%
3	55%
4	40%
5	35%
6	30%

IMIYALELO YOKUSEBENZA

 VULA / YIVAMILE
Ukucofa ngokukhawuleza kweqhosha kuyakucima izibane. Lamps izakuvula kwinqanaba lokugqibela elisetyenzisiweyo lokuqaqamba.

UKUPHENDULA

• Cofa kwaye ubambe iqhosha ukwandisa i-lamp's ukukhanya. Khupha iqhosha ukuze uyeke.
• Kowokuqala 'cofa kwaye ubambe' i-dimmer iyakwandisa ukuqaqamba kwe-lamps. Kolandelayo 'cofa kwaye ubambe', i-dimmer iya kunciphisa ukuqaqamba kwe-lamps. Ku 'cofa kwaye ubambe' nganye elandelayo, i-dimmer iya kwandiswa okanye inciphise i-lamp ukuqaqamba.
• Kuthatha imizuzwana emi-4 ukulungisa i-lamps ukusuka kobuncinane ukuya kobona buninzi okanye ubuninzi ukuya kobuncinane.

IIMPAWU ZOKUCACISA KABINI IDIMMER:

• Cofa kabini xa UVULIWE; i-lamps iya kumfiliba ukuya kubuncinci useto ngaphezulu kwemizuzu engama-30 kwaye emva koko uCime.
• Cofa kabini xa IVALIWE; i-lamps izakuvula kwinqanaba elingaphambili lokuqaqamba kwaye ukuqaqamba kuya kwanda ukuya kuthi ga kwimizuzu engama-30.

UKUBEKA UBUCHULE OBUNCINCI
Abanye lamps ayisebenzi kakuhle kwimimiselo yokukhanya okuphantsi kwaye izakusilela ukuqalisa okanye inokuqhwanyaza. Ukulungelelanisa ubuncinci bokukhanya kwisetingi ephezulu kuya kuqinisekisa i-lamps uqale kwaye uncede ukuphelisa ukudanyaza.

• Cinezela kwaye ubambe iqhosha lemizuzwana eyi-10 de isalathisi se-LED sidanyaze esibonisa indlela yokucwangcisa. Ukukhanya kokukhanya kuya kuncipha ukuya kwisetingi yokuqaqamba okuncinci kwefektri.
• Ukuba izibane azisebenzi kakuhle, cofa iqhosha ukwandisa ukuqaqamba ngexabiso elincinci.
• Qhubeka de izibane zizinzile kwaye zingadayizi.
• Emva kwemizuzwana eyi-10 ngaphandle kokucofa iqhosha, ukusetwa kokukhanya kuya kugcinwa njengokukhanya okuncinci.
• Vala idimmer emva koko UVULE ukuqinisekisa i-lamp iqala kwaye ayidlikizi kwesi seto.
• Ukuseta ukuqaqamba kobona kukhanya kuncinci kwasefektri, ngenisa imowudi yeprogramu kwaye ucofe iqhosha kube kanye, emva koko ulinde imizuzwana eyi-10 ukuphuma kwimo yenkqubo.

 IIINDLELA ZOKUSEBENZA

Ukuseta imo yokusebenza, bamba iqhosha phantsi kangangemizuzwana eli-10 de isalathisi se-LED siqale ukudanyaza. Khupha iqhosha.

IMODE	INKCAZO	FACTORY IISETHINGI
1.Qalisa ukuKhaba	Qala ngenkani lamps	CIMA
2. Attenuate Maximum Ukukhanya	Yehlisa ukuqaqamba okuphezulu kwi-lamps oko kuqhwanyaza kakhulu	CIMA
3. Isalathisi se-LED	Isalathisi se-LED sihlala sivuliwe	ON

KHABA IMODE YOKUQALA

• Ngokuqinisekileyo lamps kunokuba nzima okanye kucothise ukuqala. Zama ukunyenyisa ubuncinci bokukhanya kwisetingi ephezulu. Ukuba ukukhanya okuncinci kuphezulu kakhulu ngoku, zama ukuseta kwakhona obona kukhanya buncinane kwaye wenze imo yokuQalisa iKick.
• I lamps izakuvula ngokukhawuleza phambi kokuba ibuyele kumphakamo wangaphambili wobumnyama. Useto oluhlala lukhona LUVALIWE.

Ukuseta

1. Bamba iqhosha phantsi imizuzwana eyi-10 de isalathisi se-LED siqale ukudanyaza. Khupha iqhosha.
2. Bamba iqhosha phantsi imizuzwana emi-2 de isalathisi se-LED IYAVALE.
3. Khupha iqhosha - isalathisi se-LED siya kuqalisa ukukhanya kwakhona.
4. Cinezela iqhosha ixesha eli-1 ukuguqula iNdlela yokuSebenza oyifunayo - bona itafile engentla.
5. Xa isalathisi se-LED siyeka ukudanyaza imowudi yokusebenza iguqulwe.

QAPHELA UBUCHULE OBUKHULU
 Ukuba i-lampUkuqaqamba kobuninzi, le mowudi iyakunciphisa ukudanyaza. Useto oluhlala lukhona LUVALIWE.

Ukuseta

1. Bamba iqhosha phantsi imizuzwana eyi-10 de isalathisi se-LED siqale ukudanyaza. Khupha iqhosha.
2. Bamba iqhosha phantsi imizuzwana emi-2 de isalathisi se-LED IYAVALE.
3. Khupha iqhosha - isalathisi se-LED siya kuqalisa ukukhanya kwakhona.
4. Cinezela iqhosha amaxesha ama-2 ukuguqula iNdlela yokuSebenza oyifunayo - bona itafile engentla.
5. Xa isalathisi se-LED siyeka ukudanyaza useto ngoku siguquliwe.

Isibonakaliso se-LED

• Isalathisi se-LED sinokusetwa ukuba sicime xa i-lamp icimile. Oku kunokuba luncedo kumagumbi okulala apho isalathisi se-LED sinokucaphukisa. Useto oluhlala lukhona luvuliwe.
• Ukuseta imowudi yeSibonisi se-LED UKUVALA nako kunokunceda nge-wat ephantsitagI-LED lamps ezikhanyayo naxa i-dimmer icinyiwe, inciphisa isiphumo esikhanyayo.

Ukuseta

1. Bamba iqhosha phantsi imizuzwana eyi-10 de isalathisi se-LED siqale ukudanyaza. Khupha iqhosha.
2. Bamba iqhosha phantsi imizuzwana emi-2 de isalathisi se-LED IYAVALE.
3. Khupha iqhosha - isalathisi se-LED siya kuqalisa ukukhanya kwakhona.
4. Cinezela iqhosha amaxesha ama-3 ukuguqula iNdlela yokuSebenza oyifunayo - bona itafile engentla.
5. Xa isalathisi se-LED siyeka ukudanyaza imowudi yokusebenza iguqulwe.

PHAWULA: Inye kuphela imo enokuthi iguqulwe ngexesha.

UKUSETSHA KWAKHONA I-DIMPBD KWIISETHINGI ZEFACTORY

1. Bamba iqhosha phantsi imizuzwana eyi-10 de isalathisi se-LED siqale ukudanyaza.
2. Khupha iqhosha.
3. Bamba iqhosha phantsi imizuzwana eyi-10 kwakhona de isalathisi se-LED sivuliwe.

Xa useto olunqwenelekayo lukhethiwe. Shiya i-dimmer ukuya kwixesha ngaphandle kwemodi yeprogram (30sec-1min).
Nje ukuba imowudi yenkqubo iphelelwe lixesha isalathisi se-LED siya kuyeka ukudanyaza. Isicwangciso esikhethiweyo sisetyenziswe ngoku kwi-dimmer.

IZILUMKISO ZOKHUSELEKO EZBALULEKILEYO

UKUTSHINTSHWA KWEENKONZO
Kufuneka kuthathwe ukuba naxa OFF, iinqununu voltagu-e uzakube ekhona kwi-lamp kufanelekile. Amandla ombane kufuneka aqhawulwe kwi-breaker yesekethe ngaphambi kokuba kutshintshe nayiphi na i-lamps.

UKUFUNDA OKUPHANTSI NGEXESHA LOKUKHUSELELWA KOVAVANYO LOKWEHLUKA
I-DIMPBD sisixhobo sobume obuqinileyo kwaye ke ufundo oluphantsi lunokubonwa xa kuqhutywa uvavanyo lokwaphuka kwe-insulation kwisekethe.

UKUCOCA
Coca kuphela ngentengisoamp ilaphu. Musa ukusebenzisa abrasives okanye imichiza.

UKULUNGISA INGXAKI

I-DIMMER KWAYE IZIKHANYI AYIKHANYI

• Qinisekisa ukuba isiphaluka sinamandla ngokujonga i-breaker circuit.
• Qinisekisa i-lamp(s) ayonakaliswa okanye yophukile.

IZIKHATHI AYIZIKHANYI OKANYE IZIKHATHI ZIYAZICISHA

• Ukuba isalathisi se-LED sidanyaza amaxesha ama-5 ekuvuleni, kukho impazamo eyenzekileyo.
• Ngaphezulu kobushushu, Ngaphezulu komthamotage okanye ukhuseleko lomthwalo ogqithisiweyo luyasebenza.
• Qinisekisa ukuba nayiphi na i-iron core ballast inomthwalo owaneleyo.
• Qinisekisa ukuba i-dimmer ayilayishwanga kakhulu okanye ayisebenzi kubushushu obuphezulu be-ambient.
• Jonga i-lamp(s) ilungele ukufiphala.

IZIKHATHI ZOSILELA UKUCIMA NGOKUPHELELEYO
Ezinye ii-LED lamps inokukhazimla okanye idayithe xa isibane sicinyiwe. Guqula imowudi yesibonisi se-LED UKUVALA.

IZIKHANYI ZIZIKHANYA OKANYE UKUTSHINTSHA OKUKHANYA NGAMAXESHA AMAFUTSHANE
Oku kungenxa yokuguquguquka kombane kwaye kuqhelekile. Ukuba kunzima kakhulu, zama olunye uhlobo lwe-lamp.

IZIKHANYA ZIHLALA ZIKHANYA NGOKUPHELELEYO OKANYE I-FLICKER NGOKUQHUBEKAYO
I lamp(s) isenokungakulungeli ukufiphalisa. Jonga ku-lamp ulwazi lomenzi.

IZIbane ziyacima XA IFENI YESEILING/ EKHIPHAYO IYAKHANYWA OKANYE icinyiwe.

• I-dimmer ijika i-lamps IVILE ukunqanda umonakalo kwizinto ezidlulayo zombane.
• Faka isihluzo se-capacitive ukucinezela izinto ezidlulayo

ISIQINISEKISO KUNYE NENKCAZELO

Umrhwebi, GSM Electrical (Australia) Pty Ltd iqinisekisa imveliso ngokuchasene nokuveliswa kunye nesiphene semathiriyeli ukusuka kumhla we-invoyisi ukuya kumthengi wokuqala ixesha leenyanga ezili-12. Ngexesha lewaranti yoMrhwebi, i-GSM Electrical (Australia) Pty Ltd iya kuthatha indawo yeemveliso ezibonisa ukuba zineziphene apho imveliso ifakwe ngokufanelekileyo kwaye igcinwe kwaye isetyenziswe ngaphakathi kwemigaqo echazwe kwiphepha ledatha yemveliso nalapho imveliso ingekho phantsi komatshini. umonakalo okanye uhlaselo lwekhemikhali. Iwaranti ikwaxhomekeke kwiyunithi efakelwe yikontraka yombane enelayisensi. Ayikho enye iwaranti echaziweyo okanye echaziweyo. Umrhwebi, i-GSM Electrical (e-Australia) Pty Ltd ayisayi kuba noxanduva lwawo nawuphi na umonakalo othe ngqo, ongathanga ngqo, ongalindelekanga okanye olandela emva koko.

*I-brand ye-Clipsal kunye neemveliso ezinxulumeneyo ziimpawu zoRhwebo ze-Schneider Electric (Australia) Pty Ltd. kwaye zisetyenziselwa ireferensi kuphela.

• GSM Electrical (Australia) Pty Ltd
• Inqanaba 2, 142-144 Fullarton Road, Rose Park SA 5067
• P: 1300 301 838
• E: service@gsme.com.au
• 3302-200-10870 R4
• Iqhosha lokutyhala le-DIMPBD, iDijithali yeDijithali, uMda oLawulayo-Imanuwali yokuFakela 231213