I-SOYAL AR-837-E LCD Access Controller

Imixholo

AR-837-EF:Fingerprint
Iimveliso

Iintambo zeTheminali

Izixhobo

Ukhetho

• Ethernet : DMOD-NETMA10
  (Imodyuli ye-TCP/IP iquka i-RJ45 Connector) okanye i-DMOD-NETMA11 (iModyuli ye-TCP/IP enomsebenzi we-POE)
• Nayiphi na iModyuli yokuPhuma kweWiegand (CN10)
• I-AR-MDL-721V(Imodyuli yeLizwi)
• I-AR-321L485-5V (TTL ukuya kwi-RS-485 Converter)

I-AR-837-E / EE / ER: UMlawuli woFikelelo weLCD

Iimveliso

Iintambo zeTheminali

Izixhobo

• Izikrufu AR-837-E/ER
• Izikrufu 837-EE

 

• Ubungqina bamanzi Strip AR-837-E/EE
• Ubungqina bamanzi Strip 837-ER

Ukhetho

• Ethernet : DMOD-NETMA10
  IModyuli ye-TCP/IP ibandakanya iRJ45 Isiqhagamshelo) okanye iDMOD-NETMA11
  (Imodyuli ye-TCP/IP enomsebenzi wePOE)
• Nayiphi na iModyuli yokuPhuma kweWiegand (CN10)
• I-AR-MDL-721V (Imodyuli yeLizwi)
• I-AR-321L485-5V (TTL ukuya kwi-RS-485 Converter)

I-AR-837-W:Ikhadi le-LCD leSave saMandla

Iimveliso

Iintambo zeTheminali

Izixhobo

Ukhetho

• Ethernet : DMOD-NETMA10
  IModyuli ye-TCP/IP ibandakanya iRJ45 Isiqhagamshelo) okanye iDMOD-NETMA11
  (Imodyuli ye-TCP/IP enomsebenzi wePOE)
• Nayiphi na iModyuli yokuPhuma kweWiegand (CN10)
• I-AR-MDL-721V (Imodyuli yeLizwi)
• I-AR-321L485-5V (TTL ukuya kwi-RS-485 Converter)

Ukufakela (AR-837-E/EE/EF/W)

• A-1.Ubuso bunyuselwe
• A-2.Ifakwe

B.

• A-1.Surface Mounted: Sebenzisa iscrewdriver ukujija ipleyiti yokukhwela eludongeni. A-2.Ifakwe: Ukumba umngxuma 837-E: 85mmx113mm / 837-EF: 128mmx109mm; kwaye emva koko, sebenzisa i-screwdriver ukujija ipleyiti yokukhwela eludongeni.
• Tsala intambo iphela ngomngxuma wofikelelo kwi-mounting plate.
• Qhoboshela i-AR-837-E okanye i-AR-837-EF kwi-mounting plate kwaye ufake izikrufu (ezinikezelweyo) kwimingxuma esezantsi ngeqhosha lika-Allen.
• Faka amandla. I-LED (eluhlaza) iya kukhanya nge-beep enye.

1. Iityhubhu: Iingcingo zonxibelelwano kunye neentambo zombane AKUFUNEKA zibotshwe kumjelo omnye okanye kwityhubhu enye.
2. Ukukhetha ucingo: Sebenzisa i-AWG 22-24 Shielded Twist Pair ukuze ugweme iingcingo zeenkwenkwezi, i-CAT 5 cable ye-TCP / IP uxhumano
3. Ubonelelo lwamandla: Musa ukuxhobisa umfundi kwaye utshixe ngobonelelo lwamandla olufanayo. Amandla okufunda asenokungazinzi xa isitshixo sivula, oko kunokubangela a
   ukungasebenzi kakuhle komfundi.
   Ufakelo olusemgangathweni: Isilayidi somnyango kunye nesitshixo sisebenzisa umbane ofanayo, kwaye umfundi kufuneka asebenzise omnye umbane ozimeleyo

Itheyibhile yesiqhagamshelo

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
Umchasi-TampTshintsha	1	Bomvu	NC
	2	Orenji	COM
	3	Lubhelu	HAYI

Intambo:	CN4
Ucingo Isicelo			Ucingo	Umbala	Inkcazo
Tshixa iRelay			1	Blue White	(NO)DC24V1Amp
			2	Purple White	(NC)DC24V1Amp
Tshixa Relay COM			3	Mhlophe	(COM)DC24V1Amp
Uqhagamshelwano lomnyango			4	Orenji	Ungeniso lwe-Negative Trigger
Phuma kwiTshintsho			5	Mfusa	Ungeniso lwe-Negative Trigger
I-Alarm Relay			6	Ngwevu	NO/NC Optional (by jumper)
Amandla			7	Bubomvu obungqingqwa	I-DC 12V
			8	Okumnyama Okumnyama	I-DC 0V

Intambo: CN6

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
I-RS-485 ye-Lift Controller	1	Okuluhlaza okutyebileyo	RS-485(B-)
	2	Okuluhlaza okwesibhakabhaka	RS-485(A+)

I-LCD / i-Biometrics Access Controller / i-LCD Card Saver Energy

Itheyibhile yesiqhagamshelo
Intambo: CN5

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
Beeper	1	Pinki	Imveliso yeBeeper 5V/100mA, Phantsi
I-LED	2	Lubhelu	Ukukhutshwa kwe-LED ebomvu 5V / 20mA, Max
	3	Ntsundu	Imveliso ye-LED eluhlaza 5V / 20mA, Max
Ukuphuma komnyango	4	Blue White	Ubuninzi beZiphumo zeTransistor. 12V/100mA (Vula uMqokeleli oPhantsi)
Wiegand	5	Luhlaza obhityileyo	Wiegand DAT: 0 Igalelo
	6	UBlue Omncinci	Wiegand DAT: 1 Igalelo
UQhagamshelwano lomnyango weWG	7	Orenji	Ungeniso lwe-Negative Trigger
WG Phuma kwiSwitshi	8	Mfusa	Ungeniso lwe-Negative Trigger

Intambo:  CN8

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
Igciniwe	1	Bomvu	-
Uphawu lokuqalisa ukhuseleko	2	Mfusa	Ukhuseleko Isiphumo sophawu lokuqalisa
Ukuxhobisa	3	Mhlophe ebomvu	Isiphumo sokuxhobisa
Ukunyanzelwa	4	Mthubi White	I-Duress Output

Intambo:  CN13

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
Intsimbi yomnyango	1	Mhlophe Omnyama	Ubuninzi beZiphumo zeTransistor. 12V/100mA(Vula uMqokeleli oPhantsi)
	2	Mnyama	I-DC 0V

Itheyibhile yesiqhagamshelo (2): Ngokuzithandela

Intambo: CN7 

Ucingo Isicelo

Ucingo

Umbala

Inkcazo

Ucingo Isicelo

Ucingo

Umbala

Inkcazo

Ucingo Isicelo

Ucingo

Umbala

Inkcazo

1

-

-

Imodyuli yelizwi (*Isithethi esifunekayo 8Ω / 1.5W (Ubukhulu. 2W)

1

Mnyama

I-DC 0V

HID RF Module

1

Orenji

I-ANT 1

2

-

-

2

Lubhelu

TX

2

Mfusa

I-ANT 2

TCP/IP Isiphumo

3

Orange White

Umnatha – TX+

3

Mhlophe

TE

3

Mnyama

I-DC 0V

4

Orenji

Umnatha – TX-

4

Orenji

RX

4

Bomvu

I-DC 5V

5

Green White

Umnatha – RX+

5

Luhlaza

Wiegand DAT: 1 Igalelo

5

Bomvu

I-DC 5V

6

Gerrn

Umnatha – RX-

6

Luhlaza

Wiegand DAT: 0 Igalelo

7

-

-

6

Luhlaza

-

7

Mhlophe

-

Intambo: CN9 

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
Imodyuli yelizwi (*Isithethi esifunekayo 8Ω / 1.5W (Ubukhulu. 2W)	1	Mnyama	I-DC 0V
	2	Lubhelu	TX
	3	Mhlophe	TE
	4	Orenji	RX
				5	Bomvu	I-DC 5V
	6	Luhlaza	-

Intambo:  CN10

Ucingo Isicelo	Ucingo	Umbala	Inkcazo
HID RF Module	1	Orenji	I-ANT 1
	2	Mfusa	I-ANT 2
	3	Mnyama	I-DC 0V
	4	Bomvu	I-DC 5V
	5	Luhlaza	Wiegand DAT: 1 Igalelo
				6	Luhlaza	Wiegand DAT: 0 Igalelo
	7	Mhlophe	-

Umzobo wocingo

Qhagamshela kwiBolt yoMbane  

Qhagamshela kwiTshixo yeMagnetic

Qhagamshela kuGcitho loMbane

Ucango luVule kakhulu iNdlela yokuNxibelela iAlam ende (Inzwa yocango lwangaphandle)

TampI-er-Switch Alarm Wiring Method
(Qhagamshela kwiNkqubo yokuBeka iliso esembindini ngeModbus ngeModyuli ye-Universal I/O)

• Yenza i-WG Port ikwazi ukukhetha [Yenza i-Alarm ye-Alarm isebenze] ngoSeto lweParameter ye-701Server Software.

TampI-er-Switch Alarm Wiring Method
(Indlela yokuNxibelela iWiring ye-WG Port Door)

• Yenza i-WG Port ikwazi ukukhetha [Yenza i-Alarm ye-Alarm isebenze] ngoSeto lweParameter ye-701Server Software.

AR-837-E / EE / EF / ER / W

Yomeleza ukhuseleko nge-AR-721RB

• Le ndlela yocingo ayifanelekanga kwi "Share Door Relay" umsebenzi (umise ngokucwangcisa ipharamitha ye-701ServerSQL). Ukuba kukho iingcingo zangaphandle kwi-Wiegand
• I-Wiring ye Khubaza "I-Share Door Relay" ( Cwangcisa ngokufunda iparameters, i-WG Port kufuneka ivule i-Digital Relay Output ukwenzela ukuba i-"Share Door setting Window ye-701ServerSQL Relay" isebenze.

Qhagamshela kuMfundi

• I-Wiring of Disable "Share Door Relay" ( Cwangcisa ngeeparamitha zokuseta iWindow ye-701ServerSQL

I-AR-837-E/EE/EF/ER ibe yimo ye-WG 

1. Xa i-AR-837-E/EE/EF/ER iba yimowudi ye-WG, inokusetyenziswa kunye nasiphi na isilawuli.
2. Inkxaso ye-AR-837-EF Anti-pass-back ngomnwe okanye ikhadi. ※ Ukusebenzisa uMthetho : Umnwe : Zombini i-AR-837-EF Imowudi ye-Master kunye ne-AR-837-EF imodi ye-WG kufuneka igcine yonke idatha yeFP efanayo kunye nenombolo yekhadi lenyani okanye elibonakalayo. Ikhadi : Inokudlulisa umyalezo weWG kumlawuli.
3. Xa ufaka i-Window yokuSeta iParameter kwi-701Server, isixhobo sinokutshintshwa sibe yi-WG Slave Mode ngokuvumela i-"WG Output Mode".

Ukucwangcisa

 Isitshixo se-keyboard/ Vula

Tshixa/ Vula
Cofa * kunye no # ngaxeshanye ukutshixa ikhibhodi. Cinezela ngaxeshanye kwakhona ukuze uvule

Ukungena kunye nokuPhuma kwiMowudi yeNkqubo

Ukungena
Igalelo 123456 okanye PPPPPP [umzekelo] Ixabiso eliMiselweyo= 123456. Ukuba sele utshintshile iKhowudi enguMphathi = 876112, igalelo 876112 → Imo yokufikelela kwiprogramu PS Ukuba akukho myalelo ungeniswayo ngaphakathi 30 imizuzwana., iyakushiya ngokuzenzekelayo imo yenkqubo.

Iyaphuma
Cinezela i** ngokuphindaphindiweyo → 6 Yeka okanye 7 Yeka kunye nokuxhobisa (Nceda ubhekisele kwi-alam / ukusetwa kwezixhobo)

Ukutshintsha iKhowudi eyiNtloko
Imo yenkqubo yofikelelo → izixhobo ezi-5 → iKhowudi eyi-2 enguMphathi → Faka ikhowudi entsha enamanani ama-6 → Iphumelele

Ukusekwa kokuqala

Ukubeka Ulwimi
Imo yokufikelela kwiprogramu → izixhobo ezi-5 → 1 Ulwimi → 0 EN → Iphumelele → Inkqubo yokuqala…

I-ID yeNode yoSeto loMfundi
Imo yenkqubo yokufikelela → Iiparamitha ezi-3[1] → I-ID yeNodi e-1 → Ngena kwiNodi entsha ye-ID : 1 ~ 254 (ixabiso elimiselweyo:001) → Inombolo yomnyango ongundoqo: 0 ~ 255
→ Inombolo yomnyango we-WG1: 0 ~ 255 → Bonisa i-UID (0=Hayi, 1=WG, 2=ABA, 3=HEX) → Vula i-DHCP(0:Hayi, 1:En, 2=Phuma) → Iphumelele

I-LCD / i-Biometrics Access Controller / i-LCD Card Saver Energy

INkcazelo yoMsebenzi wePhaneli ePhambili kunye nesalathisi

1. Isistim iya kuphuma ngokuzenzekelayo kwiMowudi yeNkqubo xa ingasebenzi imizuzwana engama-30.
2. Ubume be-LED bubonisa indlela yomlawuli kunye nesimo. Kulungile (luhlaza) - ukuqhwanyaza rhoqo xa usebenza kwiNkqubo yeNkqubo - okanye ukudanyaza ikhadi esele likhona kwimowudi yokufunda yekhadi, kuza isilumkiso se-2 beeps kunye nephaneli yeLCD ibonisa "Ikhadi elifanayo: idilesi yomsebenzisi / inombolo yekhadi" Impazamo (ebomvu) - ikhadi elingasebenziyo Isilumkiso se-2 beeps kunye nephaneli ye-LCD ibonisa "Impazamo yeNombolo yeKhadi!" - okanye kwimo echasene nokudlula umva, xa kuphulwa ukufikelela, kuza isilumkiso esinye kwaye iphaneli yeLCD ibonisa "Impazamo ye-Anti-pass!" Ukuxhobisa (okuluhlaza) – ukuxhobisa ngobume I-alam (ebomvu) – nayiphi na imeko engaqhelekanga eyenzekayo
3. Iphedi yamaqhosha iya kutshixelwa ngemizuzwana engama-30. xa ikhowudi ye-pin engalunganga okanye ikhowudi yenkosi ingena rhoqo.
4. Igalelo lemposiso enkulu yekhowudi ye-pin kunye ne-master code inokutshintshwa nge-software 701Server (ehlala ikho: amaxesha ama-5)

Uthungelwano : / kunye ne-flash interactively phakathi kweNyanga kunye ne-DAY. [umzekelo] 12/07←→12 07 Yima wedwa : Akukho kudanyazayo [umz.] 12/07 (←Bhekisela kumfanekiso)

1.  Yongeza/ Cima
   1.  Yongeza > I-ID yekhadi
   2. Yongeza > RF Funda
   3.  Misa > Idilesi
   4. Nxiba > i-ID #
   5. Cima > Idilesi
   6. Cima > ID #
   7. Buyisa > Idilesi
   8.  Buyisa > ID #
   9.  Iqela le-Antipass
2.  Useto lomsebenzisi
   1.  Inombolo yokuvula
   2. Indlela yokufikelela
   3.  Yandisa Iinketho
   4.  Umgangatho omnye
   5.  Umgangatho omninzi
   6.  Bhalisa uMnwe
   7. Cima uMnwe
3. Iiparamitha[1]
   1. Isazisi seNode
   2. Kwi-Off Open Zone
   3. Ukudluliselwa komnyango Tm
   4. Ucango Vala Tm
   5. I-Alarm Relay Tm
   6. Ulibaziseko lweAlam Tm
   7. Ukulibazisa ukuxhobisa Tm
   8. Ukuxhobisa nge-PWD
4. Iiparamitha[2]
   1. Ukubuyisela kwakhona ngokuzenzekelayo
   2. I-Egress(RTE)
   3. Iintlobo ngeentlobo
   4. Ngena Ngenkani
   5.  Vala & Misa
   6. I-Anti-pass-back
   7. Ikhowudi yeDuress
   8. Imo yegama lokugqithisa
   9. Ukuphindisela kwisetingi sefetri
5. Izixhobo
   1. Ulwimi
   2. IKhowudi eyiNtloko
   3. Master Range
   4. Itheminali RS-485
   5. Ext.Comm CN11
   6. Vula iNdawo yeXesha
   7. Ulwazi
   8. Ukuseta iwotshi
   9. I-Alarm yemihla ngemihla
   10. I-UART Port CN9
       • A. Iziganeko zeMicimbi
6. Yeka
7. Yeka & Ukuxhobisa

Ukongeza kunye nokucima Tag
Umthamo womsebenzisi: 16384 (00000~16383)

• Ukongeza Tag by Tag ID
  Imo yokufikelela kwiprogramu → 1 Yongeza/Cima → 1 Yongeza -> I-ID yekhadi → Faka idilesi yomsebenzisi enamanani ama-5 → IKhowudi yeNdawo yoFako → IKhowudi yeKhadi lokuFaka
• Ukongeza Tag nguRF Funda uMsebenzi
  Imo yokufikelela kwiprogramu → 1 Yongeza/Cima → 2 Yongeza -> RF-Funda → Faka idilesi yomsebenzisi enamanani ama-5
  Igalelo Tag Iiyunithi(iiPC) → Vala Tag kwindawo yeRF
  Ukuba ibhetshi ye tags ziSequential, igalelo Tag Iiyunithi(pcs) kubungakanani be tags kwaye ubonise i tag nge
  elona nani lisezantsi kumlawuli ukudibanisa zonke tag idatha; kungenjalo, i tags kufuneka iziswe kumlawuli ngamnye
• Misa idilesi yomsebenzisi
  Imo yokufikelela kwiprogramu → 1 Yongeza/Cima → 3 Nxiba -> Yongeza → Ingeniso yokuQala idilesi → Faka Idilesi
• Misa Tag by Tag ID
  Imo yenkqubo yokufikelela → 1 Yongeza/Cima → 4 Nxiba -> I-ID # → IKhowudi yeNdawo yoFako → Ikhowudi yeKhadi lokuNgena
• Fumana idilesi yomsebenzisi
  Imo yokufikelela kwiprogramu → 1 Yongeza/Cima → 7 Cima -> Yongeza → Faka idilesi yokuQalisa → Faka idilesi yesiphelo
• Ukuchacha Tag by Tag ID
  Imo yenkqubo yokufikelela → 1 Yongeza/Cima → 8 Cima -> I-ID # → iKhowudi yeNdawo yoFako → iKhowudi yeKhadi yokufaka
• Kucinywa idilesi yomsebenzisi
  Imo yokufikelela kwiprogramu → 1 Yongeza/Cima → 5 Cima -> Yongeza → Faka idilesi yokuQalisa → Faka idilesi yesiphelo

AR-837-E / EE / EF / ER / W

Iyacima Tag by Tag ID
Imo yenkqubo yokufikelela → 1 Yongeza/Cima → 6 Cima -> I-ID # → iKhowudi yeNdawo yoFako → iKhowudi yeKhadi yokufaka
Ukumisela imo yokufikelela
Imo yenkqubo yokufikelela → 2 Useto loMsebenzisi → 2 Imo yoFikelelo → Faka idilesi yomsebenzisi → 0: Ayisebenzi; 1: Ikhadi ; 2: Ikhadi okanye iPIN; 3: Ikhadi & nePIN

Ikhowudi ye-PIN
Imo yenkqubo yokufikelela → 2 Useto lomsebenzisi → 1 Igama lokugqithisa → Ngena idilesi yomsebenzisi enamanani ama-5 → Faka iPIN enamanani ama-4 (0001~9999) → Iphumelele Okanye nge-701Mxumi yisete kwiscreen sabasebenzisi

Ukongeza / Ukucima iFingerprint
Ukongeza
Imo yenkqubo yokufikelela → 2 Useto lomsebenzisi → 6 Bhalisa iFP → Isitshixo kwidilesi yomsebenzisi enamanani ama-5 →iminwe emi-1 okanye emi-2 eyahlukeneyo kwilensi yoluvo → Iphumelele iPS I-AR-837EF(9000DO) ifuna ukuqokelela kabini kushicilelo lweminwe ngalunye ; kunjalo, AR-837EF(1500DO) kufuneka ukuqokelela izihlandlo ezithathu zeminwe nganye. Iyacima
Imo yokufikelela kwiprogramu → 2 Useto lomsebenzisi → 7 Cima iFP → Isitshixo kwidilesi yomsebenzisi enamanani ama-5 → Iphumelele
PS Ukuba ufuna ukucima bonke abasebenzisi 'FP, isitshixo 99999 #

Indlela yokufikelela
Imo yokufikelela kwiprogramu → 2 Useto lomsebenzisi
Indlela yokufikelela
→ Isitshixo kwidilesi yomsebenzisi enamanani ama-5 (00000~08999)
→ 0: Ayisebenzi; 1:Ikhadi; 2: Ikhadi okanye iPIN; 3: Ikhadi ne-PIN (837EF: → Chonga ngomnwe: 0: Kufuneka ; 1: Ungahoyi )
→ Iphumelele

Igama Lokuxhobisa
Imo yenkqubo yofikelelo → Iiparamitha ezi-3[1] → 8 Ukuxhobisa PWD → Faka iPIN enamanani ama-4 (0001~9999; Miyolelo: 1234) → Iphumelele Okanye nge-701Seva kwaye uyisete kwi-AR-829E isikrini

Ixesha lokulibazisa ukuxhobisa
Imo yenkqubo yokufikelela → Iiparamitha ezi-3[1] → 7 i-ArmingDelayTm → Ngena i-sta exhobileyo. Ixesha lokulibazisa(iSec), Uluhlu:000~255;Ixesha lokukhupha ipulse exhobileyo (10ms) ,Uluhlu:000~255 → Iphumelele

Ikhowudi yeDuress
Imo yokufikelela kwiprogramu → 4 Iiparamitha[2] → 7 Ikhowudi yeDuress → 4 iiseti (khetha ibe nye) → Faka iPIN enamanani ama-4 (0001~9999) → Iphumelele Okanye nge-701Server ukuyiseta kwiscreen se-AR-829E-V5
※ Ikhowudi yeDuress ifumaneka kuphela kwimo yenethiwekhi. Iya kutshintsha ikhowudi ye-pin yomntu kwaye ithumele umyalezo we-Duress kwikhompyuter njengophawu lwesilumkiso.

Izibuko leTheminali
Imo yokufikelela kwiprogramu → 5 Izixhobo → 4 Isikhululo seSitenali → 0:Phakamisa ; 1:Umamkeli ; 2:I-LED ; 3:PRN (ixabiso elimiselweyo:1) → UKhetho olungalunganga (ixabiso elimiselweyo:9600) → Iphumelele

Ukuseta i-alam / iMiqathango yokuxhobisa:

1. Ukuxhobisa kuvuliwe
2.  Inkqubo yealam iqhagamshelwe

Iimeko:

1. Ucango luvuliwe ixesha elongezelelekileyo: Ucango luvuleleke ixesha elide kunexesha lokuhanjiswa kocango kunye nexesha lokuvala umnyango.
2.  Vula ngenkani (Ivulwe ngaphandle kwekhadi lomsebenzisi elisebenzayo): Ukufikelela ngenkani okanye ngenkqubo engekho mthethweni.
3. Indawo yocango ayiqhelekanga: Yenzeka xa amandla ecinyiwe aze aphinde avulwe kwakhona, ngaphandle koko, umfundi wayexhobile phambi kokuba kucinywe amandla.

I-LCD / i-Biometrics Access Controller / i-LCD Card Saver Energy

Imo yokulinda
Ikhadi kuphela		Ikhadi okanye iPIN	Ikhadi kunye nePIN
Vula ucango	Hayi vula ucango	Faka idilesi yomsebenzisi → Igalelo I-PWD enamanani ama-4 → → Igalelo elinemivo emi-4 yokuxhobisa PWD →	Nikela i tag ukufunda → Igalelo I-PWD enamanani ama-4 → → Igalelo elinemivo emi-4 yokuxhobisa PWD →
Nikela i tag ukufunda → Igalelo I-PWD enamanani ama-4 →	→ Igalelo elinemivo emi-4 yokuxhobisa PWD → Bonisa i tag kumfundi
Imo yokufikelela kwiNkqubo
Yenza: Imo yenkqubo yokufikelela → 7 Yeka kunye nokuxhobisa		Khubaza: Imo yokufikelela kwiprogramu → 6 Yeka

[Sebenzisa i-FP] inokuthatha indawo ye [Faka ikhadi elisebenzayo].

I-Anti-pass-back
Ngelixa udibanisa ne-AR-721-U, AR-737-H / U (imodi ye-WG) kunye ne-AR-661-U ye-anti-pass-back function, indlela yokufikelela kufuneka ibe "iKhadi" kuphela.

• Isixhobo sivuleleke
  Imo yenkqubo yokufikelela → 4 IiParameters[2] → 6 Anti-pass-back → master controller khetha [1: Ewe] → WG khetha [1: Ewe]
• Umsebenzisi wekhadi vumela
  Imo yenkqubo yokufikelela → 1 Yongeza/ Cima → Iqela le-Antipass eli-9 → Faka idilesi yomsebenzisi enamanani ama-5 → Faka idilesi yomsebenzisi enemivo emi-5 → kufuneka ukhethe [1: Ewe]

Phakamisa ulawulo
[umz.] Qhagamshelana ne-AR-401RO16B ukulawula ukuba ngowuphi umgangatho umsebenzisi aya kuthi akwazi ukufikelela kuwo. (BAUD9600)

• Ukusetha Ulawulo lokuphakamisa
  Imo yenkqubo yofikelelo → izixhobo ezi-5 → 4 Isibuko seSiteminali → 0：IsiLawuli sokuPhakamisa → Ukhetho olubi 0: 9600 Ufikelelo lwenkqubo yenkqubo → izixhobo ezi-5 → iZibuko ezi-5 zeSitena → 1：Phakamisa isiLawuli
  (kufuneka usebenzise 725L485)

  Seta	Umgangatho/ Yima
  1	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16
  	0	0	0	0	0	0	0	1	0	0	0	0	0	0	0	1
  2	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32
  	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0
  3	33	34	35	36	37	38	39	40	41	42	43	44	45	46	47	48
  	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0
  4	49	50	51	52	53	54	55	56	57	58	59	60	61	62	63	64
  	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0	0

• Umgangatho omnye
  Imo yokufikelela kwiprogramu → 2 Useto lomsebenzisi → 4 kuMgangatho omnye →
  Faka idilesi yomsebenzisi enamanani ama-5 → Faka inombolo yomgangatho omnye: 1~64
• Imigangatho emininzi
  Imo yenkqubo yokufikelela → 2 Useto loMsebenzisi → 5 kuMgangatho omninzi → Faka idilesi yomsebenzisi enamanani ama-5 → Khetha uluhlu: 1 okanye 2 okanye 3 okanye 4 → Faka amanani ali-16 inani lemigangatho emininzi [0:cima, 1: yenza] [umzekelo] Seta HAYI . 114, unokuyisebenzisa nge-8 F kunye ne-16F:
  Imo yenkqubo yokufikelela → 2 Useto lomsebenzisi → 5 uMgangatho omninzi → 114 → 1 → 0000000100000001

Ikloko yeAlam (yeFactory)

Imo yenkqubo yokufikelela → Izixhobo ezi-5 → I-Alam yeMihla eyi-9 → Seta (00~15) → Seta uQalisa uTm (iiyure ezingama-24) ; Seta i-Effect Sec. (Imizuzwana njengexesha lentsimbi, Uluhlu:1~255) → Seta usuku lweveki (0:khubaza, 1: vula) → Iphumelele

Ufakelo lwezixhobo zokusebenza

AR-837-E / EE / EF / ER / W

I-OpenZone
Imo yenkqubo yokufikelela → Iiparamitha ezi-3[1] → 2 uMmandla oVulekileyo oOff 0 → uMmandla oVulelekayo ngokuzenzekela (1:khubaza, 0:vula) → Vula uMcango we-Imm. Ngexesha leZowuni eVulekileyo (1:Hayi, 1:Ewe) → iWG0 Port Auto Open Zone (1:khubaza, 0:vula) → Vula ucango lwe-Imm. Ngexesha leZowuni eVulekileyo (1:Hayi, XNUMX:Ewe) → Kuphumelele

Vula iZowuni yeXesha
Imo yenkqubo yokufikelela → 5 izixhobo → 6 Vula iZowuni yeXesha → Seta (00~15) → Ixesha (iiyure ezingama-24) ; Izibuko Elikhulu (0:khubaza, 1: vula); Izibuko le-WG (0:khubaza, 1: yenza) → Usuku lweveki (0:khubaza, 1: yenza) → iphumelele

Uphuculo lweFirmware

Fumana isoftware ephuculweyo kwi-SOYAL okanye umsasazi wethu kwaye usebenzise isoftware ethi "UdpUpdater".

Yenza isoftware. Isoftware ingaphakathi kwe-SOYAL CD okanye nceda ungene kwi-SOYAL webindawo yokukhuphela

Hlaziya i-firmware
[Nceda ungene kwi-SOYAL webindawo yokukhuphela iFirmware ye-ISP entsha.]

1. Ngenisa idilesi ekujoliswe kuyo kunye nesibuko
2. [Layisha i-F/W] vula amaxwebhu ane-ISP Firmware entsha
3.  Cofa i-Firmware ye-ISP entsha kwaye [Ivule]
4. Cofa u [Hlaziya i-F/W] ukuqalisa uhlaziyo lwe-firmware
5. Kude kuboniswe isikrini [uHlaziyo lweFirmware lugqityiwe]

Ukubuyisela Imimiselo yeFactory

Seta kwakhona zonke iiparamitha zesixhobo kunye nedatha yekhadi lomsebenzisi

• Seta kwakhona zonke iiparamitha zesixhobo kunye nedatha yekhadi lomsebenzisi:
  Imo yenkqubo yokufikelela → 4 Iiparamitha2 → 9 Ukuseta kwakhona kwiFactory →0 : Inkqubo yeParam ;
  1. Useto lomsebenzisi
  2. Inkqubo kunye nomsebenzisi
• Seta kwakhona Useto lwe-IP:
  Xa amandla esixhobo evuliwe, cofa iqhosha elithi 【SETHA FUTHI】 kwibhodi engundoqo de kulayite i-ERR (Bomvu) ye-LED yesikrini. (Jonga umfanekiso osecaleni)

※ Emva kokusebenza njengoko kungasentla, uya kuva isandi sesikhumbuzi eside, kwaye ulinde de isandi sinyamalale, emva koko usete kwakhona amandla omlawuli. Isixhobo siya kubuyiselwa kuseto lwefektri.
※ Emva kokwenza "Ukusetha kwakhona iFactory," iPort yoNxibelelwano lwaNgaphandle kufuneka isetyenziselwe kwakhona. Okanye
isivamvo sebhayometriki ayizukusebenza.
5 Izixhobo → E5 xt. Comm Port (0:FP-200 ; 1:Lift ; 2:Vein2000 ; 3:FP-9000 ; 4:Reserved)

I-LCD / i-Biometrics Access Controller / i-LCD Card Saver Energy

Ukumiselwa kwe-IP

• Vula eyakho Web Isikhangeli kunye nedilesi ye-IP esisiseko yefektri: http://192.168.1.12
  Ukuba idilesi ye-IP ye-AR-837 (E/EE/ER/EF) itshintshiwe, kufuneka singenise idilesi ye-IP entsha.
• Imenyu yephepha
  Imo yangoku: Beka iliso kwikhompyuter ye-intanethi
  Ulungiselelo lweNethiwekhi: Useto lwe-IP
  Igama Lokugqithisa lomsebenzisi: Guqula ulwazi lokungena
• Imeko yangoku
  Isimo se-Intanethi siyakwazi ukubeka esweni kwaye
  bonisa ukuba yeyiphi ikhompyuter eqhagamshela kwi-Ethernet Modyuli
  
  Bonisa ukuba yeyiphi ikhompyutha eqhagamshela kwi-Ethernet Modyuli.
  Idilesi ye-IP yangoku
• Ngena-ngegama loMsebenzisi
  
  Xa ukhetha "uSeto lweNethiwekhi" okanye "Igama lokugqithisa lomsebenzisi" ekuqaleni. Log-in window iya kuphuma kwaye nceda ufake
  KwiFactory Default
  Igama lomsebenzisi: SuperAdm
  Inombolo yomthetho: 721568
• Ulungiselelo lweNethiwekhi
  Uya kufumana idilesi yokuqala ye-IP 192.168.1.127 kwaye ujonge idilesi ye-MAC iyafana nesincamathelisi kwisixhobo seModyuli ye-Ethernet. Nceda uguqule idilesi ye-IP njengoko ufuna, kwaye emva koko ucofe iqhosha elithi "Hlaziya". Emva kokuhlaziya i-IP, nceda uphinde uqhagamshele i Web Isikhangeli ngedilesi ye-IP entsha.
  
• Igama loMsebenzisi
  Tshintsha igama lokungena lokungena ukutshixa useto lwe-IP lwe-Ethernet Modyuli.
  Igama lokugqitha liqulunqwe ngoonobumba abali-10 ubuninzi abanokuba ngu-A~Z okanye 0~9.

Amaxwebhu / Izibonelelo

I-SOYAL AR-837-E LCD Access Controller [pdf] Isikhokelo soFakelo AR-837-E, LCD Access Controller, AR-837-E LCD Access Controller

Iimbekiselo

• Incwadi yokusebenzisa