RCF HDL 6-A Line Array Module

Ulwazi lweMveliso

Iinkcukacha:

• Umzekelo: I-HDL 6-A HDL 12-AS
• Uhlobo: Imodyuli yeArray yomgca osebenzayo, iModyuli yeArray ye-Subwoofer esebenzayo
• ImiSebenzi yokuqala: Amanqanaba aphezulu oxinzelelo lwesandi, ukuqondisa rhoqo, umgangatho wesandi
• Iimbonakalo: Ukunciphisa ubunzima, kulula ukuyisebenzisa

Imiyalelo yokusetyenziswa kwemveliso

Imiyalelo yoKhuseleko ngokubanzi kunye nezilumkiso:

INQAKU ELIBALULEKILEYO:
Ngaphambi kokusebenzisa inkqubo, funda ngononophelo incwadana yemiyalelo enikiweyo. Kubalulekile ukufakela okuchanekileyo kunye nokusetyenziswa okukhuselekileyo. Ngalo lonke ixesha gcina imanyuwali ukuze uyisebenzise kwixesha elizayo.

ISILUMKISO – IMIQATHANGO YOKHUSELEKO:

1. Funda onke amanyathelo okhuseleko ngononophelo njengoko equlethe ulwazi olubalulekileyo.
2. Ziphephe naziphi na izinto okanye ulwelo ekungeneni kwimveliso ukuthintela imijikelezo emfutshane.
3. Ungazami naluphi na uhlengahlengiso olungachazwanga kwincwadana. Qhagamshelana nabasebenzi benkonzo abagunyazisiweyo kuyo nayiphi na imiba.
4. Nqamula intambo yamandla ukuba imveliso ayisetyenziswanga ixesha elide.
5. Ukuba kufunyenwe ivumba elingaqhelekanga okanye umsi, cima loo mveliso ngoko nangoko.
6. Qinisekisa ukuba abafakeli abaziingcali baphatha ukufakela ukuthobela imimiselo nemigangatho.

Iingcebiso zokufakwa:

• Sebenzisa kuphela iindawo ezinikezelweyo zokubambelela kufakelo oluxhonyiweyo.
• Jonga ukufaneleka komphezulu wenkxaso kwaye usebenzise amacandelo afanelekileyo okuncamathisela.
• Kuphephe ukupakisha iiyunithi ezininzi ngaphandle kokuba kuchaziwe kwincwadana yomsebenzisi ukuthintela umngcipheko wokuwa kwesixhobo.

Imibuzo ebuzwa qho

Umbuzo: Ndingayigcina njani imveliso ukuba ayisetyenziswa ixesha elide?

A: Kunconywa ukukhupha intambo yamandla ukuba imveliso ingasetyenziswanga ixesha elide ukuqinisekisa ukhuseleko.

Umbuzo: Ngaba ndingakwazi ukuguqula okanye ukulungisa imveliso ngokwam?

A: Hayi, kucetyiswa ukuba ungawenzi naluphi na umsebenzi, uhlengahlengiso, okanye ulungiso olungachazwanga ngokucacileyo kwincwadana. Qhagamshelana nabasebenzi benkonzo abagunyazisiweyo kuyo nayiphi na imiba.

Umbuzo: Ndingakwazi ukupakisha iiyunithi ezininzi zale mveliso?

A: Ukuthintela umngcipheko wokuwa kwesixhobo, kunqande ukupakisha iiyunithi ezininzi ngaphandle kokuba kukhankanyiwe ngokukodwa kwincwadi yomsebenzisi.

INTSHAYELELO

Iimfuno zeenkqubo zanamhlanje zokuqinisa isandi ziphezulu kunangaphambili. Ngaphandle kokusebenza okucocekileyo - amanqanaba aphezulu oxinzelelo lwesandi, ukuqondisa ngokuthe rhoqo, kunye nomgangatho ovakalayo weminye imiba ibalulekile kwiinkampani eziqashisayo kunye nemveliso ezifana nokunciphisa ubunzima kunye nokulula kokusetyenziswa ukunyusa ukuthutha kunye nexesha lokukhwabanisa. I-HDL 6-A iguqula ingcamango yefomathi enkulu, ibonelela ngokusebenza okuphambili kwimarike eyandisiweyo yabasebenzisi abaqeqeshiweyo.

UKHUSELEKO NGOKUBANZI UMYALELO NEZILUMKISO

INQAKU ELIBALULEKILEYO
Phambi kokudibanisa usebenzisa okanye ukurhwasha inkqubo, nceda ufunde le ncwadana yomyalelo ngononophelo kwaye uyigcine isesandleni ukuze uyisebenzise kwixesha elizayo. Le ncwadana kufuneka ithathwe njengenxalenye ebalulekileyo yemveliso
kwaye kufuneka ikhaphe inkqubo xa itshintsha ubunini njengesalathiso sofakelo oluchanekileyo nokusetyenziswa kunye namanyathelo okhuseleko. I-RCF SpA ayizukuthatha naluphi na uxanduva lofakelo olungachanekanga kunye/okanye ukusetyenziswa kwemveliso.

ISILUMKISO

• Ukuthintela ingozi yomlilo okanye yombane, ungaze usibeke esichengeni esi sixhobo kwimvula okanye ukufuma.
• Inkqubo ye-TT+ yoluhlu lwemigca kufuneka ikhutshelwe kwaye ihanjiswe ngabakhuseli abaziingcali okanye abasebenzi abaqeqeshiweyo phantsi kweliso labakhuseli abaziingcali.
• Ngaphambi kokurhwasha inkqubo funda ngononophelo le ncwadana.

IMIQATHANGO YOKHUSELEKO 

1. Onke la manyathelo okhuseleko, ngokukodwa lawo okhuseleko, makafundwe ngenyameko enkulu, njengoko enika ingcaciso ebalulekileyo.
2. Ubonelelo lwamandla oluvela kwii-mains
   • Umthamo omkhulutage iphezulu ngokwaneleyo ukubandakanya umngcipheko wokubanjwa ngumbane; fakela kwaye uqhagamshele le mveliso phambi kokuyiplaga. Phambi kokunika amandla, qiniseka ukuba lonke uqhagamshelo lwenziwe ngokuchanekileyo kunye nomthamotage yakho engundoqo ihambelana voltage iboniswe kwipleyiti yokulinganisa kwiyunithi, ukuba akunjalo, nceda uqhagamshelane nomthengisi wakho we-RCF.
   • Amalungu esinyithi eyunithi afakwe emhlabeni ngentambo yamandla. Isixhobo esinolwakhiwo lwe-CLASS I siyakuqhagamshelwa kwindawo yokuphuma engundoqo enoqhagamshelo lomhlaba olukhuselayo.
   • Khusela intambo yamandla kumonakalo; qinisekisa ukuba ibekwe ngendlela engenakunyathelwa okanye icunyuzwe zizinto. Ukuthintela umngcipheko wokutshatyalaliswa kombane, ungaze uvule le mveliso: akukho malungu ngaphakathi apho umsebenzisi kufuneka afikelele khona.
3. Qinisekisa ukuba akukho zinto okanye ulwelo unokungena kule mveliso, njengoko oku kunokubangela isekethe emfutshane.
   Esi sixhobo asiyi kuboniswa ukuvuza okanye ukutshiza. Akukho zinto zizaliswe ngolwelo, njengeevazi, ziya kubekwa kwesi sixhobo. Akukho mithombo yendalo (enjengamakhandlela alayitiweyo) kufuneka ibekwe kwesi sixhobo.
4. Ungaze uzame ukwenza nayiphi na imisebenzi, uhlengahlengiso okanye ulungiso olungachazwanga ngokucacileyo kule ncwadana.
   Qhagamshelana neziko lakho lenkonzo eligunyazisiweyo okanye abasebenzi abaqeqeshiweyo ukuba kukho enye yezi zinto zilandelayo:
   • imveliso ayisebenzi (okanye isebenza ngendlela engaqhelekanga).
   • Intambo yombane yonakele.
   • Izinto okanye ulwelo lufunyenwe kwiyunithi.
   • Imveliso ixhomekeke kwimpembelelo enzima.
5. Ukuba le mveliso ayisetyenziswanga ixesha elide, qhawula intambo yamandla.
6. Ukuba le mveliso iqala ukukhupha naliphi na ivumba elingaqhelekanga okanye umsi, yicime ngoko nangoko kwaye uqhawule intambo yombane.
7. Musa ukudibanisa le mveliso nakwesiphi na isixhobo okanye izincedisi ezingabonwanga kwangaphambili.
   Ufakelo olumisiweyo, sebenzisa kuphela iindawo zokubambelela ezizinikezeleyo, kwaye ungazami ukuxhoma le mveliso ngokusebenzisa izinto ezingafanelekanga okanye ezingacaciswanga kule njongo. Khangela kwakhona ukufaneleka kwendawo yenkxaso apho imveliso i-ankile (udonga, isilingi, isakhiwo, njl.), kunye namacandelo asetyenziselwa ukudibanisa (i-anchors ye-screw, izikrufu, izibiyeli ezingabonelelwanga yi-RCF, njl.), ekufuneka iqinisekise ukhuseleko lwenkqubo/ufakelo ekuhambeni kwexesha, kananjalo kuqwalaselwe, umzample, ukungcangcazela koomatshini okuqhele ukwenziwa ziitransducers. Ukuthintela umngcipheko wezixhobo eziwayo, musa ukupakisha iiyunithi ezininzi zale mveliso ngaphandle kokuba oku kunokwenzeka kuchaziwe kwincwadana yomsebenzisi.
8. I-RCF SpA icebisa ngamandla ukuba le mveliso ifakwe kuphela ngabafaki abaqeqeshiweyo abaqeqeshiweyo (okanye iifemu ezikhethekileyo) abanokuqinisekisa ukufakela okuchanekileyo kwaye baqinisekise ngokungqinelana nemigaqo esebenzayo.
   Yonke inkqubo yomsindo kufuneka ihambelane nemigangatho yangoku kunye nemimiselo malunga neenkqubo zombane.
9. Iinkxaso kunye neetroli.
   Isixhobo kufuneka sisetyenziswe kuphela kwiitroli okanye kwiinkxaso, apho kukho imfuneko, ezicetyiswa ngumenzi. Isixhobo/inkxaso/indibano yetroli mayihanjiswe ngononophelo olukhulu. Ukuma ngequbuliso, ukutyhala ngamandla, nemigangatho engalinganiyo inokubangela ukuba indibano ibhukuqe.
10. Kukho izinto ezininzi zoomatshini kunye nezombane ekufuneka ziqwalaselwe xa kufakwa inkqubo yeaudio yobuchwephesha (ukongeza kwezo zine-acoustic ngokungqongqo, njengoxinzelelo lwesandi, ii-engile zokugubungela, ukuphendula rhoqo, njl. njl.).
11. Ukulahlekelwa kwindlebe.
    Ukuvezwa kumanqanaba aphezulu esandi kunokubangela ukungeva okusisigxina. Inqanaba loxinzelelo lwe-acoustic olukhokelela ekulahlekelweni kokuva luhluke kumntu ukuya kumntu kwaye luxhomekeke kwixesha lokuvezwa. Ukuthintela ukuvezwa okunokuba yingozi kumanqanaba aphezulu oxinzelelo lwe-acoustic, nabani na ochatshazelwe kula manqanaba kufuneka asebenzise izixhobo ezifanelekileyo zokhuseleko. Xa i-transducer ekwazi ukuvelisa amanqanaba aphezulu esandi isetyenziswa, ngoko ke kuyimfuneko ukunxiba iiplagi zendlebe okanye ii-earphone ezikhuselayo. Jonga inkcazo yobugcisa bemanuwali ukwazi elona nqanaba liphezulu loxinzelelo lwesandi.

Ukuthintela ukwenzeka kwengxolo kwiintambo zomqondiso, sebenzisa iintambo ezikhuselweyo kuphela kwaye uphephe ukuzibeka kufutshane:

• Isixhobo esivelisa imimandla ye-electromagnetic ephezulu.
• Iintambo zombane
• Imigca yesandisi-lizwi.

IZIQINISEKISO ZOKUSEBENZA

• Beka le mveliso kude kuyo nayiphi na imithombo yobushushu kwaye uhlale uqinisekisa ukujikeleza komoya okwaneleyo ngeenxa zonke.
• Musa ukulayisha ngaphezulu le mveliso ixesha elide.
• Ungaze unyanzelise izinto zolawulo (izitshixo, amaqhina, njl. njl.).
• Musa ukusebenzisa izinyibilikisi, utywala, benzene, okanye ezinye izinto eziguquguqukayo ukucoca amalungu angaphandle ale mveliso.

ISILUMKO
Ukuthintela iingozi zokutshatyalaliswa kombane, musa ukuxhuma kumbane ongundoqo ngelixa i-grille isusiwe.

IZIQINISEKISO ZOKUSEBENZA JIKELELE 

• Musa ukuthintela iigrilles zokungenisa umoya zeyunithi. Beka le mveliso kude kuyo nayiphi na imithombo yobushushu kwaye uhlale uqinisekisa ukujikeleza komoya okwaneleyo malunga neegrille zokungenisa umoya.
• Musa ukulayisha kakhulu le mveliso ixesha elide.
• Ungaze unyanzelise izinto zolawulo (izitshixo, amaqhina, njl. njl.).
• Musa ukusebenzisa izinyibilikisi, utywala, benzene, okanye ezinye izinto eziguquguqukayo ukucoca amalungu angaphandle ale mveliso.

I-HDL 6-A

• I-HDL 6-A yindlela yokwenyani esebenzayo ephezulu elungele ukusetyenziswa yokhenketho kwimisitho emincinci ukuya kwephakathi, ngaphakathi nangaphandle. Ixhotyiswe ngee-woofers ezi-2 x 6”, kunye ne-1.7” yabaqhubi, inika umgangatho obalaseleyo wokudlala kunye noxinzelelo lwesandi esiphakamileyo kunye ne-1400W enamandla yedijithali eyakhelwe-ngaphakathi. ampi-lifier ehambisa i-SPL ephezulu ngelixa inciphisa imfuno yamandla.
• Icandelo ngalinye, ukusuka kunikezelo lwamandla ukuya kwibhodi yokufaka kunye neDSP, ukuya kwimveliso stages to woofers nabaqhubi, iye yaphuhliswa ngokungaguquguqukiyo ngokukodwa ngamaqela obunjineli anamava eRCF, kunye nawo onke amacandelo ahambelana ngononophelo.
• Oku kudityaniswa okupheleleyo kwawo onke amacandelo akuvumeli kuphela ukusebenza okuphezulu kunye nokuthembeka okuphezulu kokusebenza kodwa kwakhona kunika abasebenzisi ukuphatha ngokulula kunye ne-plug-and-play induduzo.
• Ngaphandle kwale nyaniso ibalulekileyo, izithethi ezisebenzayo zibonelela nge-advan ebalulekileyotagES Esi siphumo asibonakali kwizithethi ezinikwe amandla apho i ampI-lifier ikumgama weesentimitha ezimbalwa ukusuka kwi-transducer.
• Isebenzisa imagnethi ye-neodymium ephucukileyo kunye nendlu entsha eyaphukileyo eyakhiwe ngeplywood ekhaphukhaphu kunye ne-polypropylene, inobunzima obuphantsi ngokumangalisayo bokuphathwa ngokulula kunye nokubhabha.
• I-HDL 6-A iyona nto ikhethekileyo xa umgca we-line array performance iyadingeka kunye nokukhawuleza nokulula ukuseta kufuneka. Inkqubo ibonisa ii-transducers ze-RCF zanamhlanje; i-1.7” yomqhubi wekhoyili yelizwi enamandla kakhulu efakwe kwi-waveguide eyi-100° x 10° echanekileyo inika ukucaca kwelizwi ngengcaciso ephezulu kunye namandla amangalisayo.

I-HDL 12-AS

• I-HDL 12-AS yindibaniselwano ye-subwoofer ye-HDL 6-A. Ukwakhiwa kwe-12 "woofer, i-HDL 12-AS, yindawo edibeneyo esebenzayo ephantsi kwaye ine-1400 W enamandla yedijithali. ampisihlanguli. Yeyona nto ifanelekileyo encedisayo ekudaleni i-HDL ebhabhayo
• 6-Amaqela anomsebenzi ogqwesileyo. Ngombulelo kubukhulu bayo obudibeneyo bunokuthwalwa ngokulula kwaye bukhawuleza kakhulu kwaye kulula ukuqala ukusebenzisa i-digital stereo crossover (DSP) eyakhelweyo kunye ne-adjustable crossover frequency ukudibanisa imodyuli yomgca womgca.
• Ibonisa i-digital stereo crossover (DSP) eyakhelweyo kunye ne-adjustable crossover frequency ukuxhuma i-HDL 6-A imodyuli yomgca we-array okanye i-satellite.
• I-mechanics edibeneyo iyakhawuleza kwaye ithembekile. Igrille yangaphambili ifakwe ngamandla. I-foam ekhethekileyo ye-transparent-to-sound exhasa ngaphakathi inceda ukukhuselwa ngakumbi kwee-transducers eluthulini.

IIMFUNO ZAMANDLA NOKUSEKWA

ISILUMKISO

• Inkqubo yenzelwe ukusebenza kwiimeko ezinobutshaba kunye nezifuna ngamandla. Nangona kunjalo, kubalulekile ukuthatha inkathalo egqithisileyo yobonelelo lwamandla e-AC kwaye usete ukuhanjiswa kwamandla okufanelekileyo.
• Inkqubo yenzelwe ukuba i-GROUNDED. Ngalo lonke ixesha sebenzisa uqhagamshelwano olusekelwe phantsi.
• PowerCon isixhobo coupler sisixhobo sokuqhawula umbane ongundoqo we-AC kwaye kufuneka sifikeleleke ngokulula ngexesha nasemva kofakelo.

NGOKU
Oku kulandelayo ziimfuno zexesha elide kunye nencopho yangoku kwimodyuli nganye ye-HDL 6-A/HDL12-AS:

Iyonke imfuno yangoku ifunyenwe ngokuphindaphinda imfuno enye yangoku ngenani leemodyuli. Ukufumana owona msebenzi ugqwesileyo qinisekisa ukuba imfuno epheleleyo yangoku yenkqubo ayidali ivolthi ebalulekileyotage drop on the cables.

UKUPHATHA
Qinisekisa ukuba yonke inkqubo isekelwe ngokufanelekileyo. Zonke iindawo zokumisa ziya kudityaniswa kwindawo enye. Oku kuya kuphucula ukunciphisa i-hums kwinkqubo yomsindo.

AC CABLES DAISY imixokelelwane

Imodyuli nganye ye-HDL 6-A/HDL12-AS inikwe i-Powercon outlet kwi-daisy chain ezinye iimodyuli. Elona nani liphezulu leemodyuli ezinokwenzeka kwitsheyini yedaisy yile:

• 230 VOLT: Iimodyuli ezi-6 zizonke
• 115 VOLT: Iimodyuli ezi-3 zizonke

ISILUMKISO – UMNGCIPHEKO WOMLILO
Inani elingaphezulu leemodyuli kwikhonkco ledaisy liya kugqitha umlinganiselo we-Powercon connector ratings kwaye kudala imeko enokuba yingozi.

AMANDLA UKUSUKA KWIZIGABA ESITHATHU
Xa inkqubo inikwe amandla ukusuka kwisigaba sesithathu sokusasazwa kwamandla kubaluleke kakhulu ukugcina ibhalansi efanelekileyo kumthwalo wesigaba ngasinye samandla e-AC. Kubaluleke kakhulu ukubandakanya ii-subwoofers kunye neesathelayithi ekubalweni kokuhanjiswa kwamandla: zombini ii-subwoofers kunye neesathelayithi ziya kuhanjiswa phakathi kwezigaba ezithathu.

UKUBAMBA INKQUBO

I-RCF iphuhlise inkqubo epheleleyo yokuseka kunye nokuxhoma i-HDL 6-A isistim yomgca we-array eqala kwidatha yesofthiwe, i-enclosures, i-rigging, i-accessories, kunye neentambo, kude kube kufakelo lokugqibela.

IZILUMKISO JIKELELE ZOKUGQIBELA KUNYE NEMIQATHANGO YOKHUSELEKO 

• Ukumisa imithwalo kufuneka kwenziwe ngononophelo olukhulu.
• Xa uhambisa inkqubo soloko unxiba izigcina-ntloko ezikhuselayo kunye nezihlangu.
• Ungaze uvumele abantu ukuba badlule phantsi kwenkqubo ngexesha lenkqubo yokufakela.
• Ungaze ushiye inkqubo ingajongwanga ngexesha lofakelo.
• Ungaze uyifakele inkqubo kwiindawo zofikelelo loluntu.
• Ungaze uqhoboshele eminye imithwalo kwisixokelelwano soluhlu.
• Ungaze unyuke inkqubo ngexesha okanye emva kofakelo.
• Ungaze uveze inkqubo kwimithwalo eyongezelelweyo eyenziwe ngumoya okanye ikhephu.

ISILUMKISO 

• Inkqubo kufuneka ikhutshelwe yimithetho nemigaqo yeLizwe apho inkqubo isetyenziswa khona. Kuluxanduva lomnini okanye umqhekezi wokuqinisekisa ukuba inkqubo igqwethiwe ngokufanelekileyo ngokweLizwe kunye nemithetho nemimiselo yendawo.
• Ngalo lonke ixesha khangela ukuba onke amalungu enkqubo yokurigging angabonelelwanga kwi-RCF ngala:
  • esifanelekileyo kwisicelo
  • ivunyiwe, yaqinisekiswa, kwaye imakishwa
  • ilinganiswe ngokufanelekileyo
  • ikwimeko egqibeleleyo
• Ikhabhinethi nganye ixhasa umthwalo opheleleyo wenxalenye yenkqubo engezantsi. Ikhabhinethi nganye yenkqubo kufuneka ihlolwe ngokufanelekileyo.

I-RCF SHAPE ISOFTWARE YOMyili KUNYE NOKHUSELEKO

Inkqubo yokunqunyanyiswa yenzelwe ukuba ibe neyona nto ikhuselekileyo yokhuseleko (ixhomekeke kuqwalaselo). Ukusebenzisa isoftware ye "HDL50 Shape Designer" kulula kakhulu ukuqonda iimeko zokhuseleko kunye nemida yoqwalaselo oluthile. Ukuqonda ngcono ukuba loluphi uluhlu lokhuseleko oomatshini abasebenza kulo isingeniso esilula sifunekayo: I-HDL 6-A ii-arrays 'mechanics zakhiwe nge-UNI EN 10025 Steel eqinisekisiweyo. Isoftware yokuqikelela i-RCF ibala amandla kwindawo nganye egxininisiweyo yendibano kwaye ibonisa eyona nto incinci yokhuseleko kuyo yonke ikhonkco. Intsimbi yolwakhiwo inoxinzelelo loxinzelelo (okanye i-Force-Deformation elingana negophe) njengoku kulandelayo:

Ijika libonakaliswe ngamanqaku amabini abalulekileyo: i-Break Point kunye ne-Yield Point. Olona xinzelelo luphezulu lolona xinzelelo luphezulu olufunyenweyo. Uxinzelelo lokugqibela lwe-tensile luqhele ukusetyenziswa njengomgaqo wamandla esixhobo kuyilo lolwakhiwo, kodwa kufuneka kuqatshelwe ukuba ezinye iipropathi zamandla zihlala zibaluleke kakhulu. Enye yezi ngokuqinisekileyo Amandla Okuvelisa. Umzobo we-stress-strain yentsimbi yesakhiwo ubonisa ikhefu elibukhali kuxinzelelo olungaphantsi kwamandla okugqibela. Kolu xinzelelo lunzima, izinto eziphathekayo zikhula kakhulu ngaphandle kotshintsho olubonakalayo kuxinzelelo. Uxinzelelo olwenzeka kulo lubizwa ngokuba yiNqaku leSivuno. Ukuguqulwa okusisigxina kunokuba yingozi, kwaye imboni yamkele i-0.2% yoxinzelelo lweplastiki njengomda ongekho mthethweni othathwa njengowamkelekileyo kuzo zonke ii-arhente ezilawulayo. Uxinzelelo kunye noxinzelelo, uxinzelelo oluhambelanayo kolu hlobo lwe-offset luchazwa njengesivuno.

• Kwisoftware yethu yokuxela kwangaphambili, iMiba yoKhuseleko ibalwa ngokuqwalasela uMda weStress oPhezulu olingana namandla eSivuno, ngokwemigangatho kunye nemithetho yamazwe ngamazwe.
• Isiphumo soKhuseleko lweFactor bubuncinane bazo zonke izinto ezibaliweyo zokhuseleko, kwikhonkco okanye ipini nganye.

Apha kulapho usebenza khona ngeSF=7

• Ngokuxhomekeke kwimimiselo yokhuseleko lwendawo kunye nemeko, into efunekayo yokhuseleko inokuhluka. Kuluxanduva lomnini okanye umbhexeshi wokuqinisekisa ukuba inkqubo igqwethwa ngokufanelekileyo yimithetho yeLizwe kunye nemithetho yasekuhlaleni.
• Isoftware “ye-RCF yoMyili weMilo” inika iinkcukacha ezithe vetshe kwinkalo yokhuseleko kuqwalaselo oluthile ngalunye.
• Iziphumo zihlelwe ngokweendidi ezine:

ISILUMKISO

• Umba wokhuseleko sisiphumo semikhosi esebenza kwimivalo yempukane kunye nenkqubo yangaphambili kunye namakhonkco angasemva kunye nezikhonkwane kwaye kuxhomekeke kwizinto ezininzi eziguquguqukayo:
  • – inani leekhabhathi
    – fly bar engile
    - ii-engile ukusuka kwiikhabhinethi ukuya kwiikhabhinethi. Ukuba enye yezinto eziguquguqukayo ezikhankanyiweyo iyatshintsha into yokhuseleko MALUSELE ibalwe ngokutsha kusetyenziswa isoftware phambi kokuringa inkqubo.
• Kwimeko apho i-fly bar ithathwe kwii-motor ezi-2 qinisekisa ukuba i-angle ye-fly bar ichanekile. I-engile eyahlukileyo kwi-engile esetyenziswe kwi-software yokuqikelela inokuba yingozi. Ungaze uvumele abantu ukuba bahlale okanye badlule phantsi kwesistim ngexesha lenkqubo yofakelo.
• Xa ifly bar ikekele ngokukodwa okanye uluhlu lugobe kakhulu umbindi womxhuzulane unokuphuma kumakhonkco angasemva. Kule meko, amakhonkco angaphambili aphantsi koxinzelelo kwaye amakhonkco angasemva axhasa ubunzima obupheleleyo benkqubo kunye noxinzelelo lwangaphambili. Ngalo lonke ixesha jonga ngononophelo kakhulu ngesoftware ye "HDL 6-A Shape Designer" yazo zonke ezi ntlobo zeemeko (nangona nenani elincinci leekhabhathi).

UQIKELELO SOFTWARE – UMyili wemilo

• I-HDL 6-A uMyili weMilo yisoftware yethutyana, eluncedo ekusekweni koluhlu, kubuchwephesha, kunye neengcebiso ezifanelekileyo zokusetwa kwangaphambili.
• Isetingi echanekileyo yoluhlu lwesandisi-lizwi alunakungahoyi iziseko ze-acoustics kunye nokwazi ukuba izinto ezininzi zinegalelo kwisiphumo se-sonic esihambelana nokulindelweyo. I-RCF ibonelela umsebenzisi ngezixhobo ezilula ezinceda ukusetwa kwenkqubo ngokulula nangokuthembeka.
• Le software kungekudala iza kutshintshwa yisoftware epheleleyo yee-arrays ezininzi kunye nokulinganisa indawo entsonkothileyo kunye neemephu kunye neegrafu zeziphumo.
• I-RCF icebisa ukuba le software isetyenziswe kuhlobo ngalunye lwe-HDL 6-A uqwalaselo.

UKUFAKWA KWESOFTWARE

Isoftware yaphuhliswa ngeMatlab 2015b kwaye ifuna amathala eencwadi enkqubo yeMatlab. Kufakelo lokuqala lomsebenzisi kufuneka abhekisele kwiphakheji yofakelo, efumaneka kwiRCF webindawo, equlathe iMatlab Ixesha lokuSebenza (ver. 9) okanye upakisho lofakelo oluya kukhuphela usetyenziso lweXesha lokuSebenza kwi web. Nje ukuba iilayibrari zifakwe ngokuchanekileyo, kuzo zonke iinguqulelo ezilandelayo zesoftware umsebenzisi unokukhuphela ngokuthe ngqo usetyenziso ngaphandle kweXesha lokuSebenza. Iinguqulelo ezimbini, i-32-bit kunye ne-64-bit, ziyafumaneka ukuba zikhutshelwe.

OKUBALULEKILEYO:

• UMatlab akasaxhasi iWindows XP kwaye ngenxa yoko iHDL50-ShapeDesigner (32-bit) ayisebenzi ngolu guqulelo lwe-OS.
• Unokulinda imizuzwana embalwa emva kokucofa kabini kwisifakeli kuba isoftware ijonga ukuba iiLayibrari zeMatlab ziyafumaneka. Emva kwesi sinyathelo, ukufakela kuqala. Cofa kabini isifakeli sokugqibela (jonga ukukhutshwa kokugqibela kwindawo yokukhuphela yethu website) kwaye ulandele amanyathelo alandelayo.

Emva kokukhethwa kweefolda zeHDL6-SahpeDesigner software (Figure 2) kunye neMatlab Libraries Runtime, isifakeli sithatha imizuzu embalwa kwinkqubo yokufakela.

YILA INKQUBO

• I-software ye-HDL6 ye-Shape Designer ihlukaniswe ngamacandelo amabini amakhulu: inxalenye ekhohlo ye-interface inikezelwe kwiinguqu zeprojekthi kunye nedatha (ubungakanani babaphulaphuli ukugubungela, ukuphakama, inani leemodyuli, njl.), inxalenye echanekileyo ibonisa iziphumo zokucubungula.
• Ekuqaleni umsebenzisi kufuneka azise idatha yabaphulaphuli ekhetha imenyu efanelekileyo ye-pop-up ngokuxhomekeke kubukhulu babaphulaphuli kunye nokwazisa idatha yejometri. Kwakhona kunokwenzeka ukuchaza ubude bomphulaphuli.
• Isinyathelo sesibini yinkcazo yoluhlu olukhetha inani leekhabhinethi kuluhlu, ukuphakama kokuxhoma, inani leendawo zokuxhoma kunye nohlobo lweeflybars ezikhoyo. Xa ukhetha iindawo ezimbini zokuxhoma qwalasela loo manqaku abekwe kwi-flybar extremes.
• Ukuphakama koluhlu kufuneka kuthathelwe ingqalelo ekubhekiselwe kwicala elingezantsi le-flybar, njengoko kuboniswe kumfanekiso ongezantsi.

Emva kokufaka yonke igalelo ledatha kwindawo ekhohlo yojongano lomsebenzisi, ngokucinezela iqhosha le-AUTOPLAY isoftware iya kwenza:

• Indawo yokuxhoma yekhonkco eno-A okanye u-B kwindawo ebonisiwe ukuba kukhethwe indawo yokulanda enye, umva kunye nomthwalo wangaphambili ukuba iindawo ezimbini zokuchola zikhethiwe.
• I-angle yokuthambeka ye-Flybar kunye ne-splays yekhabhathi (ii-engile ekufuneka sizise kwikhabhathi nganye ngaphambi kokuphakamisa imisebenzi).
• Utyekelo oluya kuthatyathwa yikhabhinethi nganye (ukuba kukho indawo yokuchola enye) okanye kuya kufuneka siyithathe ukuba besinokuthambeka iqela ngokusetyenziswa kweenjini ezimbini. (amabini athathe amanqaku).
• Ubungakanani bomthwalo opheleleyo kunye noKhuseleko lweFactor: ukuba useto olukhethiweyo aluniki iFactor yoKhuseleko > 1.5 umyalezo obhaliweyo ubonisa ngombala obomvu ukusilela ukuhlangabezana nezona meko zincinci zokhuseleko koomatshini.

I-algorithm yokuzidlalela ngokuzenzekelayo yaphuhliswa ukuze kugqunywe ubungakanani babaphulaphuli. Usebenziso lwalo msebenzi lucetyisiwe ukulungiselela usetyenziso lwe-array. I-algorithm ephindaphindayo ikhetha kwikhabhinethi nganye eyona angle ilungileyo ekhoyo kubuchwephesha.

UMSEBENZI OWENZIWAYO

Kusalindelwe isoftware yokulinganisa esemthethweni kunye neqinisekileyo, i-RCF icebisa ukusetyenziswa kwe-HDL6 uMyili weMilo kunye ne-Ease Focus 3. Ngenxa yesidingo sokusebenzisana phakathi kwesoftware eyahlukeneyo, ukuhamba komsebenzi okucetyiswayo kuthatha la manyathelo alandelayo kuwo onke uluhlu kwiprojekthi yokugqibela:

• uMyili wemilo: abaphulaphuli kunye nokuseta uluhlu. Ukubala kwimowudi "yokudlala ngokuzenzekela" ye-flybar tilt, ikhabhathi, kunye ne-splays.
• Gxininisa 3: Xela apha iiengile, ukuthambeka kwebha yebhabha, kunye noseto lwangaphambili olwenziwe nguMyili weMilo.
• Umyili weMilo: ukuguqulwa kwesandla kwii-engile ze-splay ukuba ukulinganisa ku-Focus 3 akuniki iziphumo ezanelisayo ukujonga into yokhuseleko.
• Gxininisa 3: Xela apha ii-engile ezintsha kunye nokuthambeka kwebhabha yobhabha eveliswe nguMyili wemilo. Phinda inkqubo de kube iziphumo ezilungileyo zifunyenwe.

I-RIGING COMONES

	Inkcazo	Isincedisi p/n
1	BARRA SOSPENSIONE HDL6-A E HDL12-AS – ukuya kuthi ga kwi-16 HDL6-A – ukuya kuthi ga kwi-8 HDL12-AS – ukuya kuthi ga kwi-4 HDL12-AS + 8 HDL6-A	13360360
2	I-PIN YOKUTSHA NGOKUKHAWULEZA	13360022
3	IBHABHA YEBHA CHOLA i-HDL6-A	13360372
4	IBRACKET YOKUQHAGAMSHELWA NGOKUKHUSELEKELEKILEYO IKLASTA YOKUGQIBELA KWI-SUBWOOFER
5	POLE MOUNT BRACKET

1	13360129	HOIST SPACING chain. Ivumela indawo eyaneleyo yokuxhoma uninzi lwezikhongozeli ezi-2 zekhonkco lemoto kwaye inqanda nayiphi na impembelelo kwibhalansi ethe nkqo yoluhlu xa inqunyanyisiwe kwindawo enye yokuchola.
2	13360372	IBHABHA YEBHA CHOLA i-HDL6-A + 2 I-PIN YOKUQHUBEKA OKUKHAWULEZAYO (SPARE PART P/N 13360022)
3	13360351	AC 2X AZIMUT PLATE. Ivumela ulawulo lwenjongo ethe tye yeqela. Inkqubo kufuneka idityaniswe ngeenjini ezi-3. I-1 yangaphambili kunye ne-2 ifakwe kwi-azimuth plate.
4	13360366	IKART ENEAMAELI I-AC KART HDL6 + 2 I-PIN YOKUQHUBEKA OKUKHAWULEZAYO (SPARE PART 13360219)
5	13360371	I-AC TRUSS CLAMP HDL6 + 1 I-PIN YOKUQHUBEKA OKUKHAWULEZAYO (SPARE PART P/N 13360022)
6	13360377	POLE MOUNT 3X HDL 6-A + 1 I-PIN YOKUQHUBEKA OKUKHAWULEZAYO (SPARE PART 13360219)
7	13360375	I-LINKBAR HDL12 UKUYA kwi-HDL6 + 2 I-PIN YOKUQHUBEKA OKUKHAWULEZAYO (SPARE PART 13360219)
8	13360381	IMVULA INQAKU 06-01

INKQUBO YOKUGQIBELA

• Ufakelo kunye nolungiselelo kufuneka lwenziwe kuphela ngabasebenzi abaqeqeshiweyo nabagunyazisiweyo abajonga iMithetho esebenzayo yesizwe yoThintelo lweeNgozi (RPA).
• Luxanduva lomntu ofaka indibano ukuqinisekisa ukuba ukumiswa / ukumiswa kwamanqaku afanelekile ukusetyenziswa okujoliswe kuyo.
• Hlala usenza uhlolo olubonakalayo kunye nokusebenza kwezinto phambi kokusetyenziswa. Kwimeko apho kukho ukuthandabuza ngokusebenza ngokufanelekileyo kunye nokhuseleko lweempahla, ezi zinto mazirhoxiswe ekusebenziseni ngokukhawuleza.

ISILUMKISO

• Iingcingo zetsimbi phakathi kwezikhonkwane zokutshixa iikhabhinethi kunye namacandelo okubamba ayihloselwe ukuthwala nayiphi na imithwalo. Ubunzima bekhabhinethi kufuneka buthwalwe kuphela yi-Front kunye ne-Splay / ikhonkco yangasemva ngokubambisana nemigca yangaphambili kunye neyomva yokurhweba kwiikhabhathi zesandisi-lizwi kunye neFlying frame. Qinisekisa ukuba zonke izikhonkwane zokutshixa zifakwe ngokupheleleyo kwaye zitshixiwe ngokukhuselekileyo phambi kokuba uphakamise nawuphi na umthwalo.
• Kwimeko yokuqala sebenzisa isoftware ye-HDL 6-A ye-Shape Designer ukubala ukuseta okufanelekileyo kwenkqubo kunye nokujonga iparamitha yokhuseleko.

FLYBAR SETUP

1. I-HDL6 iflybar ivumela ukusetwa kwebar esembindini kwiindlela ezimbini ezahlukeneyo "A" kunye "neB".
2. Uqwalaselo "B" luvumela ukuthambekela okuphezulu okuphezulu kweqela.

WEKA IBHA EPHAKAMILEYO KWIMO “B”
Esi sixhobo sinikezelwe kuqwalaselo "A".

Ukuseta kuqwalaselo "B":

1. Susa izikhonkwane zecotter "R", khupha i-linchpins "X" kunye nezikhonkwane zokutshixa ngokukhawuleza "S"
2. Phakamisa ibar esembindini emva koko uyibeke kwakhona usenza isalathisi "B" kwileyibhile kunye nemingxuma "S" ihambelane kunye.
3. Hlanganisa kwakhona i-flybar ibeka kwakhona izikhonkwane "S", i-linchpins "X" kunye ne-cotter pins "R".

NYUKA IPOSI POSITION

INKQUBO YOKUNXAKAMISA

INDAWO ENGENYE PICK-UP

Misa indawo yokukhangela iflybar njengoko kubonisiwe kwisoftware, ngokuhlonipha indawo "A" okanye "B".

OKUMBINI PICK UP POINT

Ivumela ukuphakamisa iqela ngeepuli ezimbini zongeza indawo yokukhetha yokukhetha (pn 13360372).

UKUKHUSELA FLYBAR KUQALA HDL6-A ISISOMI

1. Faka izikhonkwane zokutshixa ezingaphambili "F"
2. Jikelezisa isibiyeli esingasemva kwaye usikhusele kwi-flybar ngephini lokutshixa elikhawulezayo elingasemva "S" kumngxuma weNqaku loQhagamshelwano lweHDL6

UKUKHUSELA I-HDL6 YESIBINI-ISISOMBE SOKUQALA (KWAYE ESILANDELANA)

1. Khusela izikhonkwane zokutshixa ezingaphambili "F"
2. Jikelezisa isibiyeli esingasemva kwaye usikhusele kwisithethi sokuqala usebenzisa iphini lokukhiya elikhawulezayo elingasemva "P", ukhetha i-angle yokutyekela njengoko kubonisiwe kwisoftware.

UKUKHUSELA I-FLYBAR KWI-HDL12 YOKUQALA-NJENGESISOMLO

1. Faka izikhonkwane zokutshixa ezingaphambili "F"
2. Jikelezisa isibiyeli esingasemva kwaye usikhusele kwi-flybar nge-pin yokuvala ekhawulezayo yangasemva "S" kumngxuma we-HDL12 Link Point.

UKUKHUSELA I-HDL12 YESIBINI-NJENGESITHEMBI SOKUQALA (KWAYE ESILANDELANA):

1. Tsala isibiyeli esingaphambili "A"
2. Khusela izikhonkwane zokutshixa ezingaphambili "F"
3. Jikelezisa isibiyeli esingasemva kwaye usikhusele kwisithethi sokuqala usebenzisa iphini lokutshixa elikhawulezayo elingasemva “P”.

I-CLUSTER HDL12-AS + HDL6-A

1. Ukusebenzisa i-pin yokukhiya ngokukhawuleza "P", khusela i-bracket yokudibanisa kwi-HDL6-A isithethi kwi-"Link point to HDL12-AS" hole, kwi-bracket yangasemva.
2. Jikelezisa i-HDL6-A isibiyeli esingasemva kwaye uyithintele kwisibiyeli sokudibanisa phakathi kweeflephu ezimbini zentsimbi.

1. Khusela i-HDL6-A ukuya kwi-HDL12-AS usebenzisa izikhonkwane zangaphambili zokuvala ngokukhawuleza "F" kunye nezingasemva "P".

ISILUMKISO:
soloko ukhusela zombini izikhonkwane zangasemva“P”.

INKQUBO YOKUGQIBELA

Susa ibha ephakathi "A" kwi-flybar ngokukhupha i-linchpins "X" kunye nezikhonkwane zokukhiya ngokukhawuleza "S".

UKUFAKWA KWI-SUB HDL12-AS

1. Khusela iflybar ukuya HDL12-AS
2. Khusela ibha yokupakisha "B" (njengoko kubonisiwe emfanekisweni) kwi-flybar usebenzisa i-pin yokutshixa ngokukhawuleza "S" (landela isalathiso "indawo yokupakisha")

1. Khusela i-HDL6-A kwi-flybar usebenzisa izikhonkwane zangaphambili zokuvala ngokukhawuleza "F1".
2. Khetha i-angle ye-inclination (ii-angles ezilungileyo zibonisa ukuthambekela okuphantsi kwesithethi) kwaye uyikhusele ngephini lokukhiya ngokukhawuleza "P".

Ukufumana utyekelo lwesithethi (elungileyo okanye embi) kufuneka utshatise ixabiso le-engile yebha yokupakisha ngexabiso elifanayo elichazwe kwisibiyeli esingasemva sesithethi.

Le ndlela isebenza kulo lonke utyekelo ngaphandle kwee-engile ze-10 kunye ne-7 zebha yokupakisha, ekufuneka uqhubeke ngayo ngale ndlela ilandelayo:

• i-engile ye-10 yebar yokupakisha kufuneka ihambelane ne-engile engu-0 kwisibiyeli esingasemva sesithethi.
• i-engile ye-7 yebar yokupakisha kufuneka ihambelane ne-engile engu-5 kwisibiyeli esingasemva sesithethi.

ISILUMKISO:
HLALA UQINISEKISA UBUMBANO BENKQUBO KUQINISEKISO LONKE

UKUGQIBELA KWI-SUBWOOFERS EZAHLUKENEYO (ANGAPHEZU KWE-HDL12-AS)

1. Krwela zontathu iinyawo zeplastiki “P”.
2. Khusela i-flybar kwi-bracket yokhuseleko usebenzisa i-linchpins "X" kwaye ubavimbele ngeepini ze-cotter "R".
3. Lungisa iinyawo ukuzinzisa i-flybar kwi-subwoofer emva koko uzithintele ngamandongomane azo ukuphepha ukukhulula.
4. Hlanganisa i-HDL6-A isithethi kunye nenkqubo efanayo.

ISILUMKISO:
HLALA UQINISEKISA UBUMBANO BENKQUBO KUQINISEKISO LONKE

UKUGQIBELA OKUGQIBILEYO

1. Krwela zontathu iinyawo zeplastiki “P”.
2. Lungisa iinyawo ukuzinzisa i-flybar kwi-subwoofer emva koko uzithintele ngamantongomane e-thieir ukuphepha ukukhulula.
3. Hlanganisa i-HDL6-A isithethi kunye nenkqubo efanayo.

ISILUMKISO: HLALA UQINISEKISA UBUMBANO BENKQUBO KUQINISEKISO LONKE

I-POLE UKUNYUKA NGEBHA YOKUNQINISWA

1. Khusela isibiyeli sepali kwi-flybar nge-linchpins "X" emva koko uzithintele ngezikhonkwane zecotter "R"
2. Vimba iflybar ukuya epalini ngokujija iqhina “M”.
3. Hlanganisa i-HDL6-A isithethi kunye nenkqubo efanayo.

ISILUMKISO: HLALA UQINISEKISA

• UKUQINISEKA KWENKQUBO KUQINISEKISO LONKE
• I-POLE PAYLOAD

I-POLE UKUNYUKA NGEPOLE MOUNT 3X HDL 6-A

1. Khusela iflybar epalini ngokukrukra iqhoshana "M"
2. Hlanganisa izithethi ze-HDL6-A kunye nenkqubo efanayo esetyenziselwa ukupakisha kwi-sub-HDL12-AS

ISILUMKISO: HLALA UQINISEKISA

• UKUQINISEKA KWENKQUBO KUQINISEKISO LONKE
• I-POLE PAYLOAD

EZOTHUTHO:
UKUMISA IZITHETHI KWIKART.

1. Khusela icala elingaphambili lesithethi kwikart usebenzisa izikhonkwane zokutshixa ngokukhawuleza "F"
2. Khusela icala elingasemva lesithethi kwikart usebenzisa izikhonkwane zokutshixa ngokukhawuleza "P".
   Qaphela: umngxuma oza kusetyenziswa ngu-0 ° kwisibiyeli esingasemva sesithethi.
3. Qhubeka nesithethi sesibini siphindaphinda amanyathelo “1” no-“2”

ISILUMKISO:
Ikhati yenzelwe ukuthwala izithethi ezi-6.

INKONZO KUNYE NOLONDOLO

UKULAHLWA

EZOTHUTHO – UKUGCINWA

• Ngexesha lokuthuthwa qinisekisa ukuba amacandelo okuqhawula awagxininisi okanye abonakaliswe yimikhosi yomatshini. Sebenzisa iimeko zothutho ezifanelekileyo. Sicebisa ukuba kusetyenziswe i-RCF HDL6-A kart yokukhenketha ngale njongo.
• Ngenxa yonyango lwazo olungaphezulu, amacandelo okubamba akhuselwe okwethutyana kumswakama. Nangona kunjalo, qinisekisa ukuba amacandelo akwimeko eyomileyo ngelixa egcinwe okanye ngexesha lokuthuthwa kunye nokusetyenziswa.

IZIKHOKELO ZOKHUSELEKO – HDL6-A KART

• Musa ukupakisha ngaphezulu kwe-HDL6-A yesithandathu kwiKart enye.
• Yiba nononophelo olugqithisileyo xa uhambisa izixa zeekhabhathi ezintandathu ngeKart ukunqanda ukuncamathela.
• Musa ukuhambisa iimfumba kwicala elingaphambili ukuya ngasemva le-HDL6-A’s (icala elide); soloko uhambisa izitaki emacaleni ukunqanda ukuncamisa.

INGCACISO

I-HDL 6-A/HDL 12-AS

• Ukuphendula rhoqo 65 Hz – 20 kHz 40 Hz – 120 kHz
• Ubukhulu Spl 131 dB 131 dB
• I-engile yoFundo oluthe tye 100° -
• I-engile yokugubungela ngokuNgqo 10° -
• UQwalasela uMqhubi 1.0” neo, 1.7”vc –
• I-Woofer 2 x 6.0” neo, 2.0”vc 12”, 3.0”vc

IZIMPAWU

• Igalelo leSidibanisi XLR indoda Stereo XLR
• Isidibanisi sesiphumo XLR female Stereo XLR
• Uvakalelo lwegalelo + 4 dBu – 2 dBu/+ 4 dBu

UMSEBENZI

• I-Crossover Frequency 900 Hz 80-110 Hz
• Ukukhusela i-Thermal, i-RMS Thermal, i-RMS
• Umda othambileyo Isilinganiseli esithambileyo
• Ilawula i-HF yokulungiswa kweVolume, i-EQ, isigaba, xover

AMPINDLELA YOKUPHILA

• Amandla apheleleyo 1400 W Peak 1400 W Peak
• Iifrikhwensi eziPhezulu 400 W Peak -
• Iifrikhwensi eziPhantsi 1000 W Peak-
• Ukupholisa i-convection convection
• Uqhagamshelo lwePowercon ngaphakathi ngaphandle kwePowercon

INGCACISO YOMZIMBA

• Ubude 237 mm (9.3”) 379 mm (14.9”)
• Ububanzi 470 mm (18.7”) 470 mm (18.50”)
• Ubunzulu 377 mm (15”) 508 mm (20”)
• Ubunzima 11.5 Kg (25.35 lbs) 24 Kg (52.9 lbs)
• Ikhabhinethi edibeneyo yePP yeBaltic Birch Plywood
• I-Hardware Ubuchwephesha obuDibeneyo Ukufakwa kwe-Array, ipali
• Izibambo 2 ngasemva 2 icala

I-RCF SpA:
Via Raffaello, 13 - 42124 Reggio Emilia - Italy tel. +39 0522 274411 – ifeksi +39 0522 274484 – i-imeyile: rcfservice@rcf.it. www.rcf.it.

Amaxwebhu / Izibonelelo

RCF HDL 6-A Line Array Module [pdf] Incwadi yoMnini I-HDL 6-A, i-HDL 12-AS, i-HDL 6-A i-Modyuli ye-Array yomgca, i-HDL 6-A, i-Modyuli ye-Array, i-Modyuli ye-Array, i-Modyuli

Iimbekiselo

• Incwadi yokusebenzisa