RasTech Pi 5 Allsky Camera

Allsky Setup Imiyalelo

Intshayelelo

Ikhamera ye-Allsky yiprojekthi ebeka esweni iimeko zesibhakabhaka ngokunika imifanekiso ephilayo yesibhakabhaka kwindawo ekuyo ikhamera ye-Allsky. Oku kwenziwa nge-a webindawo. Unokusebenzisa indawo yasekhaya webindawo efumanekayo kuphela kumsebenzi womnatha wobulali okanye ngokukhetha ukupapasha i webindawo kwi-intanethi ukuze ifumaneke naphi na.

AllSky Cam Example

• McYoder AllSky-01 – Ufakelo oluqhelekileyo olukude example
• ArtCentrics Yoder Site Imozulu kunye neeMeko webiphepha-Udibaniso lwe-skycam ngaphakathi webindawo ibonisa umfanekiso wekhamera yamva nje kunye ne-Astropheric Weather Forecast.

Ukongeza kumfanekiso wesibhakabhaka kwangoko webindawo inokubonelela ngezi mpawu zilandelayo: 

• Ukwaleka kweConstellation – Bonisa ukwaleka kwekroza ngokuphila view umfanekiso.
• I-Timelapse-Ividiyo yobusuku obudlulileyo.
• Ii-Keograms-Umfanekiso oshwankathela iimeko zesibhakabhaka ebusuku ngokwakha umfanekiso omnye owenziwe ngomqolo omnye weepikseli kumfanekiso ngamnye othathwe ngobusuku.
• I-Startrails-Umfanekiso obonisa iziqalo zobusuku obudlulileyo.

Olu xwebhu luchaza amanyathelo afunekayo ukwenza eyakho ikhamera yeAllsky. Idwelisa i-hardware ethengiweyo yofakelo lwenkqubo yokusebenza kunye nofakelo lwesoftware kunye noqwalaselo. Kule projekthi kwasetyenziswa ikhompyutha yeRaspberry Pi5.

Inkqubo yokwakha yale projekthi ngokulandelelana yile:

• Thenga i-Hardware
• Indibano yeHardware
  • Raspberry Pi 5 & Cam
  • Umbhobho obiyelweyo we-Allsky
• UFakelo lweNkqubo yokuSebenza yePi5
•  Ukufakela kunye noLungiselelo lweNkxaso yokuSebenza kweNkqubo yokuSebenza
• Ufakelo kunye noLungiselelo lwe-Allsky software
• Ukude Webisayithi Setup
  • Uqwalaselo lweRemote Webindawo
  • Uqwalaselo kunye noFakelo lwe-Allsky Software yeRemote Webindawo
  • Le projekthi yaba sisiphumo somsebenzi omninzi wabaphuhlisi beprojekthi ye-Allsky eGithub. Nceda wenze igalelo kubo ukukhuthaza uphuhliso olungaphezulu!

Iimbekiselo

• I-YouTube: I-All-Sky Raspberry Pi-Isebenza njani ikhamera yam yesibhakabhaka ngokuzenzekelayo kwiyadi yam yangasemva
• I-Patriot Astrophotography: Zakhele Eyakho Yonke Ikhamera Yesibhakabhaka
• Github: Allsky project
  • Allsky Documentation
  • Iingxoxo
  • Imiba
• I-Autodesk Instructables: I-Wireless yonke ikhamera ye-Sky
• Raspberry Pi5
  • Raspberry Pi OS

Hardware

Kubonelelwe ngezantsi isishwankathelo se-hardware ethengiweyo ukwenza ikhamera ye-Allsky. Ukongeza kwihardware edwelisiweyo indlu (PVC/ABS piping) ye Allsky cam kufuneka ithengwe kwivenkile yehardware yengingqi yakho.

IKhompyutha kunye ne-Hardware yeNkxaso

Into	Iindleko	Amagqabantshintshi
RasTech Raspberry Pi 5 8GB Kit 64GB Edition	$130	Inguqulelo yamva nje yeebhodi zeRaspberry ukusukela ngo-2024-11-14. Iza nekhadi le-64GB kodwa isetyenziselwe ikhadi eliphezulu lomthamo.Raspberry Pi OS (64 bit): Debian Bookworm (2024-10-22 Release)
I-ScanDisk 256 GB MicroSDXC UHS-I Card	$45	Ikhadi elikhulu lomthamo-Ngokuzikhethela
Noctua NF-A4x10 5V PWM, Premium Quiet Fan	$15	Inqaku lofakelo kunye nesoftware apha.
Gigabite USB Uhlobo C olusebenzayo lwePoE Splitter	$13	Inketho yokuphelisa i-P33 Hat ukuba awufuni ukuthenga umnqwazi.
60W Gigabite PoE ++ Injector	$30	Kuyafuneka ekusebenziseni Amandla ngaphezulu kwe-Ethernet kwi-P33 Hat
I-Arducam yeRaspberry Pi HW Ikhamera, 12.3 MP IMX477	$50	Izakufuna utshintsho oluncinci loqwalaselo njengoko kuchaziwe kwimiyalelo kuba lo ingumntu wesithathu ongumthengisi.
I-Arducam M12 Lens Kit yekhamera yeRaspberry Pi HQ	$100	Le khithi yelensi igqithise into esiyifunayo, kodwa ithenge ilensi enye, kwaye ayizange ilunge kuba ibifuna iadaptha ye-CS-Mount. Le khithi ibandakanya iadaptha.
1.56mm f/2.0 5MP HD lens eye fisheye	$15	Le lens idinga i-CS ukuya kwi-M12 i-adaptha yokunyuka ukuze isetyenziswe
CS ukuya M12 Mount Lens Converter Adapter	$2	Le nto ithatha ixesha elide ukuthunyelwa ngenqanawa.
I-Solid State Drive (256GB)	$20	Ingathatha indawo yekhadi leMicro SDXC kodwa ifuna ukongeza kwe-Geeek Pi P33 kwi-Basic Pi 5
Iyonke	$xxx

I-Allsky Cam Enclosure (Izinto ezithengiweyo kwiVenkile yeSixhobo) 

Into	Iindleko	Amagqabantshintshi
3” PVC/ABS Umbhobho	$13
PVC Umbhobho End Cap	$4
I-PVC yokuCoca i-Adapter enePlug yokuCoca	$12
3.3” i-Acrylic Dome	$15
I-Dielectric Silicone Crease	$12	Sebenzisa kuqhagamshelo lwe-ethernet ngaphandle

3-D Amacandelo aprintiweyo

Iinxalenye ezahlukeneyo eziprintiweyo ze-3D zaphuhliswa kule projekthi kwaye zichongiwe ngezantsi.

• Iitemplates - Ezi zenzelwe ukubeka phezu kwamacandelo afanelekileyo ukuchonga iindawo zokuqhuba kunye nokusika.
  • Ezantsi Template- Oku kunokuba kufakwe endaweni ye Screw Plate Template ngezantsi; kufuneka uqinisekise ukuba.
  • I-Dome Gasket Template – Ibekwe phezu kombhobho wePVC wokugqiba umnqwazi, le mingxuma ichonga indawo yokwemba izikrufu ezibambe idome yeplastiki egquma ikhamera. Ezi nazo zihambelana nemingxuma kwi-gasket yedome.
  • Screw Plate Template – Indawo yetemplate kwiplagi esezantsi kwiplagi yombhobho wePVC. Le yimingxuma yokukhupha umoya. QAPHELA ukuba kuya kufuneka kwakhona ukuba usike umngxuma osembindini wentambo ye-POE engachongwanga kule template. Qaphela ukuba umngxuma osemaphethelweni ngowereferensi yolungelelwaniso kwaye akufuneki ugrunjwe.
  • Isifanekiso esiPhezulu - Le template ibekwe phezu komphezulu wesiphelo sombhobho wePVC kwaye ichonge ukuba yeyiphi imingxuma ekufuneka igrunjwe ukugqobhoza ikhamera, idome yeplastiki, kunye nemingxuma yokuphuma ukuze idome ingabi yinkungu. Qaphela umngxuma omkhulu ngumngxuma nje wokulandela osetyenziselwa ukuchonga apho inqanaba leqamza elincinci linokuya khona. QAPHELA: Kufuneka kuqinisekiswe ukubekwa kwemingxuma yekhamera emi-4 kwaye ikwindawo eyiyo.
• I-Bug Screen-Ipleyiti encinci esetyenziselwa ukuncamathelisa isikrini sebug kuyo. Umbindi womngxuma wokudlula kwintambo emfutshane ye-Ethernet esetyenziselwa ukuqhagamshela iPi 5 kumgca wePOE Eithernet. Qaphela ukuba umdibaniso kufuneka wongezwe emva kokuba intambo idluliselwe emngxunyeni.
• Intaba yeCompass-Isibambi sekhampasi encinci esibamba kumbhobho wePVC ukuze ukwazi ukujongisa ikhamera eMantla.
• I-Dome Gasket - I-Gasket esetyenziselwa ukugcina amanzi ngaphandle, iyindawo phakathi kwe-platic dome kunye ne-PVC endcap. Iprintwe nge-TPY filament.
• Mount-Isetyenziselwa ukuncamathisela i-AllSky PVC useto lombhobho kwipali.
• I-Platform - Esi siqwenga sihamba phakathi kwe-Bug Screen kunye ne-PVC ezantsi isikrufu kwiplagi kwaye yile nto i-Pi 5 iya kuhlala kuyo. Yima - I-stand yokubeka i-AllSky / PVC rig ngelixa usebenza kuyo ukuze ingalali ngecala. I-Space ePhezulu - Ayisetyenziswanga ngoku, kodwa yenzelwe ukubekwa emzimbeni wePVC umbhobho phakathi kwe-5 yekhamera kwi-top 5 kwaye i-Pitoli iqinisekisa ukuba i-top XNUMX ikhamera rhaxa xa uthutha. Okwangoku iintambo ezingaphezulu zihamba kule ndawo kwaye kubonakala ngathi oku kungafuneki.
• I-Vent - Olu luhlu lweziqwenga lusetyenziselwa ukubeka ifeni esetyenziselwa ukutsala umoya oshushu ngaphandle komzimba we-PVC ukugcina i-Pi 5 ekutshiseni ngokugqithiseleyo. Qaphela ukuba isikrini sebug kufuneka sibekwe apha kwakhona

Imiyalelo yeNdibano yeHardware – Raspberry Pi5

INdibano ilula kakhulu, landela imiyalelo yendibano ezayo kunye neRaspberry Pi5 kwaye ungeze ikhamera yeArducam kunye nelensi yamehlo eentlanzi. Nika ingqwalasela ngokukodwa kwi-orientation yeribhoni yedatha phakathi kwePi5 kunye nekhamera (jonga imifanekiso engezantsi), ukuba ayifakwanga kwi-orientation efanelekileyo okanye ihleli kwikhonkco ngokuchanekileyo ikhamera ayiyi kufumaneka kwikhompyutheni yePi5.

Amacandelo ongezelelweyo alandelayo aya kongezwa kwinkqubo ye-Pi5 yesiseko:

• Arducam for Raspberry Pi HW Ikhamera
• I-Noctua NF-A4x10 5V PWM, iPremium Quiet Fan – Lo mlandeli uya kunceda ukupholisa i-AllSky cam enclosure.

 

Phawula: Imiyalelo yofakelo lwesiseko senkqubo yokusebenza (Debian Bookworm) kunye neenkcukacha zoqwalaselo kunye nezicelo ezixhasayo ezilandelayo kunye nofakelo lwesicelo seSkycam inikwe kolu xwebhu. Nangona kunjalo, ndiza kuthatha umfanekiso wenkqubo ene-OS, usetyenziso oluxhasayo kunye nesiseko se-Allsky cam efakiweyo, ukuze eneneni ekuphela kwento ekufuneka yenziwe ngumntu kukufaka umfanekiso ogciniweyo kwaye enze utshintsho loqwalaselo ukuya kwindawo apho iAllsky yendawo. webindawo iyasebenza.

UFakelo lweNkqubo yokuSebenza kwePi5

Ufakelo lwePi 5 yeNkqubo yokuSebenza ifezekiswa ngokudanyazisa imemori khadi ngePC usebenzisa iRaspberry Pi Imager application.

• Faka ikhadi le-SD eliza kuba neNkqubo yokuSebenza yePi5 kwiPC.
• Qala isicelo seRaspberry Pi OS Imager
  • Khetha iSixhobo: Raspberry Pi 5
  • Inkqubo yokusebenza: Raspberry Pi OS (64-bit)
  • Khetha uGcino: Khetha iKhadi le-SD eliza kusetyenziselwa iPi 5
  • Khetha iqhosha elithi [Elandelayo] ukuqhubeka
  • Sebenzisa uhlengahlengiso lwe-OS?
• Khetha [Hlela iiSetingi]
• [NGOKUBANZI] ithebhu
  • Seta igama lomamkeli: AllSky-01.local
  • Igama lomsebenzisi: {YourUserName}
  • Igama lokugqitha: {YourPassword}
  • Qwalasela Wireless LAN
• SSID: {YakhoWiFi}
• Igama lokugqithisa: {WiFiPassword}
  • Ilizwe leLAN engenazingcingo: US
  • Cwangcisa iisetingi zendawo
• Ixesha lexesha: eMelika/Phoenix
• Uyilo lwekhibhodi: thina
• [IENKONZO] tab
  • Yenza i-SSH isebenze: {Ijongiwe}
• Sebenzisa uqinisekiso lwegama lokugqitha: {Ijongiwe}
• Khetha [Gcina] ukugcina useto kwaye ubuyele kwimenyu yangaphambili
• Ngaba ungathanda ukusebenzisa useto lohlengahlengiso lwe-OS?
• Khetha [YES] ukuqhubeka
• Isilumkiso sedatha sibonisiwe ukuqinisekisa ukuba ufuna ukubhala ngaphezulu kwekhadi le-SD. Khetha u-EWE ukuze uqhubeke
• Nje ukuba usuku lubhaliwe kwikhadi le-SD uya kufumana umyalezo wokuba ugqityiwe. Emva koko ungabeka phantsi usetyenziso kwaye ususe ikhadi le-SD kwiPC kwaye ulifake kwiPi5.
• YENZIWE

Iimbekiselo

• Raspberrypi.com: Raspberry Pi OS Imager

Ukufikelela kude kwiPi5 ngeShell eKhuselekileyo (SSH)

Akunyanzelekanga ukuba ube semzimbeni phambi kwePi5 yakho ukuyimisela. Zintathu iindlela zokuqhagamshela kwiPi5 yakho ukude (jonga iireferensi ezingezantsi). Apha siza kusebenzisa indlela ye-Secure Shell (SSH) kuba ayifuni naluphi na ufakelo lwesoftware kwi-Pi5 (sele siyenze yasebenza i-SSH kwinkqubo yokuFakelo lwePi5 yeNkqubo yokuSebenza kwaye i-SSH ibandakanyiwe kwiNkqubo yokuSebenza yeWindows phantsi komyalelo weShell.

• Qinisekisa ukuba iPi5 inamandla kwaye iqhagamshelwe kwinethiwekhi yakho yasekhaya.
• KwiWindows PC
  • Qinisekisa ukuba iPC yeWindow ikwinethiwekhi efanayo nePi5
  • Qala usetyenziso lwe-Command Prompt
  • Kumgca womyalelo faka umyalelo we-SSH ukuze udibanise kwiPi5
• SSH {YourUserName}@AllSky-01.local
• Kuya kufuneka uxelelwe igama lokugqitha elikhethiweyo xa usenza umfanekiso wendlela yokusebenza yePi5.
• Qaphela: njengoko uchwetheza igama lokugqithisa aliyi kuboniswa
• Emva kokufaka igama eligqithisiweyo kufuneka ube nomyalezo ojongeka ngolu hlobo:
  • {YourUserName}@AllSky-01:~$
• Ngoku ukude kwi-Pi5 inkqubo kwaye ikulungele ukufumana imiyalelo
• Xa igqityiwe kwaye ilungele ukuphuma kwi-Pi5 ngena
  • Phuma
• Uya kubuyiselwa kwi-Windows Prompt
• Ngoku ungaphuma kwisicelo seqokobhe le windows
• Phuma
• YENZIWE

Ukusebenzisa i-VNC yoLawulo lweDesktop ekude

Enye indlela yokuqhagamshela kwi-Pi 5 ngaphandle kokusebenzisa i-Secure Shell Method (SSH) kukusebenzisa i-Virtual Network Computing (VNC) apho unokulawula i-Pi5 yakho nge-desktop interface. I-VNC yinxalenye yenkqubo yokusebenza ye-Bookworm kwi-Pi5, kodwa kufuneka ivulwe. Ukongeza, iprogram ye-VNC kufuneka ifakwe kwikhompyutha yangaphandle ukufikelela kwi-Pi5 nge-VNC.

Phawula: Kucingelwa ukuba iPC kunye nePi5 zihlala kuthungelwano olufanayo kwezi zicelo zokunxibelelana.

Yenza iVNC isebenze kwiPi5

• Ukude kwiPi 5
• Yenza inkqubo ye-raspiconfig Sudo raspi-config
• Khetha umba wemenyu yeeNdlela zoKhetho
  3 Ukhetho lwesiNxulumanisi Qwalasela uqhagamshelo kwiiperipherals
• Khetha into yemenyu ye-I3 VNC
  I3 VNC Yenza/khubaza ufikelelo lomzobo olukude kwidesktop
• Ngaba ungathanda iseva yeVNC yenziwe ukuba isebenze?
  
• Umyalezo woQinisekiso
  • Iseva yeVNC yenziwe yasebenza
• Emva kwimenyu ephambili khetha ukuphuma kwaye ubuyiselwe kumgca womyalelo
  
• YENZIWE ngoqwalaselo lwePi5!

Faka isicelo seVNC kwikhompyuter yakho
Kukho inani lezicelo zeVNC onokuzisebenzisa ukufikelela kwiPi5 yakho. Ndisebenzisa iTigerVNC (yasimahla) isicelo

• Ndwendwela iGitHub webindawo yokukhuphela inguqulelo yeTigerVNC yamva nje yenkqubo yakho yokusebenza.
• Landela imiyalelo yokuhlohla.
• Ukuqhagamshela kwiPi5 ngeVNC kuya kusebenzisa iinkcukacha zokungena njengokuba usenza nge-SSH.
• IQINILE!

IiReferensi:

• Raspberrypi.com: Ukufikelela kude
• iTigerVNC viewer webindawo
• GitHub TigerVNC iprojekthi webiphepha

Seta iseva yeSamba kwiPi5

Ukuseta iseva yeSamba kwiPi5 kuya kukuvumela ukuba ufikelele kulawulo lomsebenzisi kwiPi5 ngenethiwekhi yakho yasekhaya ukuze ukwazi ukufikelela. files kwikhompyuter yakho yobulali nje ukuba wenze imephu yokuqhuba.

• Ukude kwiPi 5
• Faka iseva yeSamba kwiPi 5
  • sudo apt ukufaka isamba samba-eqhelekileyo-bin
• Qwalasela iSamba kwiPi 5
  • sudo nano /etc/samba/smb.conf
• Hlaziya ubumbeko lweSamba file
  • Yongeza eli candelo lilandelayo ezantsi kwe file
  • AllSky-01] indlela = /ikhaya/{YourUserName} iyabhalwa = ewe iyaphendwa = ewe public=hayi
• Gcina & Uphume [ctr-X] Y
• Cwangcisa umsebenzisi ukufikelela file ukwabelana
  • sudo smbpasswd -a {YourUserName}
    • Iphasiwedi Yakho}
• Qala kwakhona iseva yeSamba
  • sudo systemctl qala kwakhona smbd
•  Kwiifestile, imephu entsha yedrayivu yenethiwekhi enamaxabiso alandelayo:
  • Isiqulathi seefayili: \\AllSky-01\{YourUserName}
  • Yongeza iziqinisekiso zokungena xa uceliwe
• IQINILE!

Iimbekiselo:

• Useta njani iSeva yeRaspberry Pi Samba

AllSky Cam Enclosure Ukupholisa Fan Ufakelo lweSoftware

Faka isicelo kwi-Pi5 ukuze uqhube fan yokupholisa kwindawo ebiyelweyo.

Phawula: uxhulumaniso lomqhubi kwi-Pi5: I-fan kufuneka idibaniswe nezikhonkwane ze-4,6 & 8 (jonga i-Raspberry Pi5 Pin Out Diagram).

• Ukude kwinkqubo yePi5 nge-SSH
  • Kulawulo lwe-SSH
• git clone https://github.com/mklements/PWMFanControl.git
• cd PWMF noLawulo
• cp FanProportional.py ~/FanProportional.py
• cp FanStepped.py ~/FanStepped.py
• crontab -e (Hlela usebenzisa nano kwaye wongeze umgca olandelayo emazantsi e file)
• @reboot python3 /home/pi/FanProportional.py &
• Gcina utshintsho kwi-crontab, susa ifolda ekhutshelweyo kwaye uqalise kwakhona
• sudo rm -rf PWMFanControl
• sudo ukuvala -r ngoku
• IQINILE!

IiReferensi:

• Ubomi be-DIY: Ukuqhagamshela iFan ye-PWM kwi-Raspberry Pi
• Hacatronic.com: Raspberry Pi5 Pin Out umzobo

Faka i-Gparted Application yokuFomatha

I-Gpart isimahla, imanejala yokwahlulahlula komzobo ehlala isetyenziswa kwiinkqubo zeLinux. Inokufakwa kwiRaspberry Pi ngokusebenzisa umphathi wepakethe, kwaye isetyenziselwa ukufomatha ikhadi le-SD njengoko kufuneka.

Phawula: Kufuneka usebenzise esi sicelo kwidesktop hayi ilayini yomyalelo xa sele ifakiwe. Faka i-Gparted Application

• Kwi-Terminal interface chwetheza le miyalelo ilandelayo
  Uhlaziyo lweSudo apt
  I-Sudo ifanelekile ukufaka i-gpart
• Emva kokulandela imiyalelo ye-intanethi, i-Gparted kufuneka ifakwe kwisixokelelwano sakho kwaye iyafikeleleka nge-desktop phantsi | Izixhobo zeNkqubo | GParted |
• YENZIWE

IiReferensi:

• Raspberrytips.com: Uyifaka njani kwaye usebenzise iGparted kwiRaspberry Pi (Umhleli weSahlulo)

Gcina iPi5 njengoMfanekiso weDiski

Imiyalelo enikwe apha ichaza inkqubo yokuxhasa iPi5 yakho kumfanekiso file enokusetyenziselwa ukubuyisela kwi-usb entsha drive usebenzisa iRaspberry Pi Installer kwikhompyuter yakho yasekhaya.

• Fometha i-USB Flash okanye eyona hard drive njengeNTFS
• Igama lokuqhuba: Pi5Backup
• Qhagamshela idrayivu kwiPi5
• Faka i-pishrink.sh kwi-Pi5 kwaye uyikopishe kwifolda /usr/local/bin
  • wget https://raw.githubusercontent.com/Drewsif/PiShrink/master/pishrink.sh
  • sudo chmod +x pishrink.sh
  • sudo mv pishrink.sh /usr/local/bin
• Jonga indawo yokunyuka indlela ye-USB drive yakho
  • lsblk
• sda8:0 1 953.6G 0 idiski
• └─sda1 8:1 1 953.5G 0 inxalenye /media/JamesJr/Pi5Backup
• Khuphela idatha yakho kwi-img file ngokusebenzisa umyalelo wedd
  • sudo dd ukuba=/dev/mmcblk0 ye=/media/{YourUserName}/Pi5Backup/ImageName.img bs=1M
• Hamba uye kulawulo lweengcambu ze-USB kunye noluhlu lwemixholo, umfanekiso wakho file ImageName kufuneka ibe khona.
  • cd /media/{YourUserName}/Pi5Backup
  • ls -l
• Sebenzisa i-pishrink nge--z ipharamitha, evala umfanekiso wakho nge-gzip (oku kungathatha imizuzu embalwa). xa yenziwe, uyakuphela nomfanekiso olingana ngokufanelekileyo file ebizwa myimg.img.gz.Ungakopa oku file kwiPC yakho kunye nathi kwisicelo seRaspberry Pi Imager ukwenza umfanekiso wekhadi elisha.
  • sudo pishrink.sh -z ImageName.img
• Cima i-Pi5 kwaye ususe i-usb drive. Ngoku ungakopa i.gz file kwiifestile zokusebenzisa kwiPi Imager ukuphinda ikhadi.

IiReferensi: 

• Uyigcina njani iRaspberry Pi yakho njengoMfanekiso weDiski

Imifanekiso 

Igama	Ubungakanani	Isishwankathelo
01-OSInstall.img.gz	1.8 GiB	Inkqubo yokuSebenza, uLawulo lwabalandeli, iseva yeSumba
02-AllskyInstall.img.gz	2.6 GiB	Faka iphakheji ye-Allsky. Akukho qwalaselo
03-AllSkyConfig.img.gz	2.7 GiB	Uqwalaselo lwe Allsky kumncedisi wasekhaya kuphela

Ukude WebUmiselo lwesiza: Umiselo lweNdawo engaphantsi

Ngaphambi kokuba sifake i-Allsky webindawo ekude webindawo kufuneka simise i-sub-domain ye webindawo yokuhlala. Oku kubandakanya la manyathelo alandelayo:

• Yenza uLwakhiwo lukavimba weefayili kwiNgcaciso yeDomain
• Yenza i-allSky Sub-Domain
• Yenza iAkhawunti yoMlawuli ukuze ulawule i-Sub-Domain

Izinto ezifunekayo kuqala

• Ukude webindawo kunye nobunini besizinda

Yenza uLwakhiwo lukavimba weefayili kwiNgcaciso yeDomain

• Ngena kwindawo yokusingatha webindawo eneakhawunti enkulu (A2Hosting)
• Kwi [cPanel Quick Login] icandelo khetha i ArtCentrics.com [cPanel Ngena] iqhosha lokuvula i-ArtCentrics [cPanel] iphepha.
• Kwi-cPanel kwi [Files] icandelo khetha [File Umphathi] ukuvula i File Isicelo somphathi.
• Kwi File Umphathi wesicelo wenza ezi folda zilandelayo:
  • /public_html/AllSkyCams
  • /public_html/AllSkyCams/Yoder
• Qaphela: Kule example Yoder ulawulo luluhlu oluza kusetyenziswa ukwenza indlu kunye nokulawula i-sub-domain ye-allsky. Luluhlu lomzali kulawulo lwe allsky.
  • /public_html/AllSkyCams/Yoder/allsky
• YENZIWE

Yenza i-allsky Sub-Domain 

• Ngena kwindawo yokusingatha webindawo eneakhawunti enkulu (A2Hosting)
  • Kwi [cPanel Quick Login] icandelo khetha i ArtCentrics.com [cPanel Ngena] iqhosha lokuvula i-ArtCentrics [cPanel] iphepha.
  •  Kwi-cPanel kwi [Domains] icandelo khetha [IiDomayini] ukuvula usetyenziso lweeNdawo.
  • KwiNdawo yesicelo khetha i [Yenza iNdawo eNtsha] iqhosha ukwenza i-sub-domain entsha ngala maxabiso alandelayo:
• Ummandla: allsky-yoder.artcentrics.com
• Ingcambu yoxwebhu: /public_html/AllSkyCams/Yoder
• YENZIWE

Yenza iAkhawunti yoMlawuli ukuze ulawule i-Sub-Domain
I-akhawunti kufuneka yenziwe enekhono lokongeza/lokususa abalawuli kunye files kulawulo (alsky) oluzakuqulatha i webindawo kunye nezinto ezinxulumene nazo files. Le akhawunti kufuneka yohlulwe kwi-akhawunti ye-Master esetyenziselwa ukulawula isizinda somzali kunye webindawo. Lo msebenzi ugqitywe ngokwenza itikiti le webinkonzo yokubamba indawo.

• Ngena kwindawo yokusingatha webindawo eneakhawunti enkulu (A2Hosting)
  • Khetha [Vula Itikiti] ukhetho
  • Yenza itikiti ngolwazi olulandelayo
• Ndifuna ukuseta iakhawunti entsha ye-ftp ukuze ndilawule i-sub-domain “allsky-yoder.artcentrics.com” ehlala e/public_html/AllSkyCams/Yoder.
  • Emva kokuba itikiti lingenisiwe kufuneka ufumane isaziso ukuba umsebenzi ugqityiwe. Qaphela i-ID yokungena kunye ne-password.
  • YENZIWE

Ulwazi lweAkhawunti yoLawulo lweNdawo

• Umgaqo-nkqubo: FTP
• Isazisi sokungena: admin@allsky-yoder.artcentrics.com
• Igama lokugqithisa: (Inikelwe yinkonzo yokusingatha)
• Igama Lomamkeli we-FTP: az1-ss110.a2hosting.com

Sebenzisa usetyenziso lweFTP olunjalo FileUmxhasi weZilla ukungena kwiakhawunti kwaye uqinisekise ukuba uvimba wolawulo uyafumaneka.

Ukude Webisayithi Setup: Faka Remote Webindawo
Le miyalelo inika iinkcukacha ngenkqubo yokufuduka kwe-allsky webindawo ekude webindawo.

(Eli candelo aligqibekanga) 

Izinto ezifunekayo kuqala 

• Ukude WebUmiselo lwesiza: Ukusetwa kweNdawo engaphantsi-iakhawunti yomlawuli weNqanaba elikude, file ulwakhiwo, kunye nommandla ophantsi kufuneka ukuba sele sewenziwe.

Iimbekiselo 

• Uxwebhu lwe-Allsky: Ukulungiselela iseva ekude

AllSky Setup Imiyalelo.docx

Imibuzo ebuzwa qho

1. Umbuzo: Ndingasebenzisa ikhamera eyahlukileyo ngokuseta ikhamera ye-Allsky?
   A: Ikhamera ecetyiswayo yale projekthi yi-Arducam ye-Raspberry Pi HW Camera, kodwa unokuphonononga ezinye iinketho ezihambelanayo kunye nohlengahlengiso oluyimfuneko loqwalaselo.
2. Umbuzo: Ngaba kunokwenzeka ukudibanisa iinzwa ezongezelelweyo zokuqokelela idatha engaphezulu?
   A: Ngelixa ingagqunywanga kule ncwadana, unokongeza abenzi boluvo ukwandisa ukusebenza kwe-Allsky cam yakho yokuseta ngokudityaniswa kwesoftware efanelekileyo.
3. Umbuzo: Ndingayilungisa njani imiba yoqhagamshelo ngekhamera ye-Allsky?
   A: Jonga useto lwakho lwenethiwekhi, qinisekisa unikezelo lwamandla olufanelekileyo kwiRaspberry Pi, kwaye kwakhonaview uqwalaselo lwesoftware ukulungisa naziphi na iingxaki zoqhagamshelwano.

Amaxwebhu / Izibonelelo

RasTech Raspberry Pi 5 Raspberry GB Starter Kit [pdf] Incwadi Yomyalelo Raspberry Pi 5 Raspberry GB Starter Kit, Raspberry Pi 5, Raspberry GB Starter Kit, GB Starter Kit, Starter Kit

Iimbekiselo

• Incwadi yokusebenzisa