MOXA UC-2100 Series Arm-Based Computers-logo

I-MOXA UC-2100 Series Arm-Based Computers

I-MOXA UC-2100 Series Arm-Based Computers-Product

Ngaphezuluview

  • I-platform ye-UC-2100 Series computing yenzelwe ukufunyanwa kwedatha edibeneyo kunye nokucubungula izicelo. Ikhompyuter iza ukuya kuthi ga kwisoftware ekhethiweyo RS-232/422/485 izibuko ezipheleleyo zeserial kunye nenye okanye ezimbini.
  • Izibuko ze-Ethernet ze-LAN. Ukongeza, i-Arm-based platform computing ifumaneka kwiimodeli ezahlukeneyo ezinokuzalisekisa iimfuno ze-interface ezahlukeneyo, ezifana ne-serial eyodwa kunye ne-serial, izibuko ze-LAN, i-gigabit Ethernet, kunye noqhagamshelwano olungenacingo. Ezi zakhono zonxibelelwano zivumela abasebenzisi ukuba balungelelanise ngokufanelekileyo iqonga lekhompyuter ye-UC-2100 yobukhulu besandla kwiintlobo zezisombululo zonxibelelwano ezinzima.
  • Amagama eModeli kunye noLuhlu lokuHlola lwePhakeji
  • UC-2100 Series ibandakanya le mifuziselo ilandelayo:
  • I-UC-2101-LX: Iqonga lee-Palm-ubungakanani becomputing yeshishini kunye ne-1 ye-serial port, i-1 Ethernet port, -10 ukuya kwi-60 °C yobushushu bokusebenza
  • UC-2102-LX: Palm-ubungakanani iqonga kwishishini computing kunye nezibuko Ethernet 2, -10 ukuba 60 °C lobushushu yokusebenza
  • I-UC-2104-LX: Iqonga le-Palm-sized computing platform kunye ne-1 Mini PCIe socket yemodyuli engenacingo, i-1 Ethernet port, -10 ukuya kwi-70 ° C ubushushu bokusebenza
  • I-UC-2111-LX: Iqonga lee-Palm-ubungakanani becomputing ye-Palm kunye ne-2 izibuko ze-serial, izibuko ze-Ethernet ezi-2, i-Micro SD socket, -10 ukuya kwi-60 ° C ubushushu bokusebenza
  • UC-2112-LX: ikhompyuter yobungakanani besundu kunye neprosesa ye-GHz eyi-1, izibuko ze-serial ezi-2, izibuko ze-Ethernet ezi-2 (1 gigabit Ethernet), i-Micro SD socket, -10 ukuya kwi-60 °C yobushushu bokusebenza.
  • UC-2112-T-LX: Palm-ubungakanani iqonga computing zoshishino kunye 1 GHz iprosesa, 2 izibuko serial, 2 izibuko Ethernet (1 gigabit Ethernet), Micro SD socket, -40 ukuba 75 °C lobushushu yokusebenza
  • Ngaphambi kokufaka ikhompyuter ye-UC-2100, qinisekisa ukuba iphakheji iqulethe ezi zinto zilandelayo
  • UC-2100 Series computer
  • Intambo yeConsole
  • Amandla ombane
  • Isikhokelo sokuFakelo esiKhawulezayo (sishicilelwe)
  • Ikhadi lewaranti
  • Yazisa ummeli wakho wentengiso ukuba kukho naziphi na izinto ezilapha ngasentla ezilahlekileyo okanye zonakele.
  • QAPHELA Intambo ye-console kunye nejekhi yamandla inokufunyanwa phantsi kwe-pulp ebunjiweyo ejikelezayo ngaphakathi kwebhokisi yemveliso.

Imbonakalo

I-MOXA UC-2100 Series Arm-Based Computers-fig1

UC-2102

I-MOXA UC-2100 Series Arm-Based Computers-fig2

UC-2104

I-MOXA UC-2100 Series Arm-Based Computers-fig3

UC-2111

I-MOXA UC-2100 Series Arm-Based Computers-fig4

UC-2112

I-MOXA UC-2100 Series Arm-Based Computers-fig5

Izalathisi ze-LED

Umsebenzi we-LED nganye uchazwe kwitheyibhile engezantsi:

Igama le-LED Ubume Umsebenzi
Amandla Luhlaza Amandla avuliwe, kwaye isixhobo sisebenza ngokuqhelekileyo
Cimile Amandla acimile
I-Ethernet Luhlaza I-Steady On: I-10 Mbps Ethernet ikhonkco Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka
Lubhelu Ngokuzinzile kwi: 100 Mbps ikhonkco le-Ethernet

Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka

Cimile Isantya esisezantsi kune-10 Mbps okanye intambo i

ayidityaniswanga

Luhlaza

(UC-2112 kuphela)

Ngokuzinzile kwi: 100 Mbps ikhonkco le-Ethernet

Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka

Lubhelu

(UC-2112 kuphela)

Ukuzinza Kwi-1000 Mbps Ethernet ikhonkco Ukuqhwanyaza: Ukuhanjiswa kwedatha kuyaqhubeka
Uthotho (Tx) Luhlaza I-serial port ihambisa idatha
Cimile I-serial port ayithumeli idatha
Uthotho (Rx) Lubhelu I-serial port ifumana idatha
Cimile I-serial port ayifumani datha
Umsebenzisi Luhlaza User Programmable
Ii-LED ezibonisa amandla omqondiso weWireless Lubhelu Inani lee-LED ezikhanyayo libonisa amandla omqondiso

Ii-LED ze-3: Ii-LED ezigqwesileyo ze-2: Zilungile

I-1 LED: Imbi

Cimile Imodyuli engenazingcingo ayibonwa

Lungisa iqhosha

Ikhomputha yephaneli ye-UC-2100 inikwe iqhosha lokusetha kwakhona, elibekwe kwiphaneli ephezulu yekhompyutheni. Ukuphinda uqalise ikhompyuter, cofa iqhosha lokuseta kwakhona okwesibini. Cinezela kwaye ubambe iqhosha lokuseta kwakhona phakathi kwe-1 ukuya kwi-7 imizuzwana ukuseta kwakhona ikhompyuter kwisetingi engagqibekanga yasefektri. Xa iqhosha lokusetha kwakhona libanjwe phantsi, uMsebenzisi we-LED (umqondiso wokuqala we-LED kwi-UC-9) uya kuqhwanyaza kanye ngesibini. I-LED yomsebenzisi iya kuzinza xa ubambe iqhosha ngokuqhubekayo imizuzwana esi-2104 ukuya kwe-7. Khupha iqhosha phakathi kweli xesha ukulayisha useto olungagqibekanga lwasefektri.

Ukufakela iKhompyutha

Udonga okanye ukufakwa kweKhabhinethi

Sebenzisa izikrufu ezibini kwicala ngalinye ukunyusela UC-2100 Series eludongeni okanye ngaphakathi kwikhabhinethi.

I-MOXA UC-2100 Series Arm-Based Computers-fig6

IiMfuno zocingo

  • Qiniseka ukuba ufunda kwaye ulandele la manyathelo okhuseleko aqhelekileyo phambi kokuqhubeka nofakelo lwaso nasiphi na isixhobo sombane:
  • Sebenzisa iindlela ezahlukeneyo ukuya kwiintambo zeendlela zombane kunye nezixhobo. Ukuba iintambo zombane kunye neendlela zocingo kufuneka ziwele, qiniseka ukuba iingcingo zi-perpendicular kwindawo yokuhlangana.
  • Musa ukuqhuba isignali okanye unxibelelwano lweengcingo kunye nokufaka umbane kwi-conduit enye yocingo. Ukuze ugweme ukuphazamiseka, iingcingo ezineempawu zomqondiso ezahlukeneyo kufuneka zihanjiswe ngokwahlukileyo.
  • Sebenzisa uhlobo lwesignali ethunyelwa ngocingo ukumisela ukuba zeziphi iingcingo ekufuneka zigcinwe zahlukile. Umgaqo wesithupha kukuba iingcingo ezabelana ngeempawu zombane ezifanayo zinokudityaniswa kunye.
  • Gcina i-input wiring kunye ne-output wiring eyahlukileyo.
  • Kucetyiswa ngamandla ukuba uleyibhelishe iingcingo kuzo zonke izixhobo ukuze zichongwe lula.

QAPHELA

  • Esi sixhobo senzelwe ukuba sisetyenziswe kwiiNdawo zoFikelelo oluThintelweyo.
  • Ukhuseleko Kuqala!
  • Qinisekisa ukuba uqhawula intambo yombane phambi kokufaka kunye/okanye ukufakela iikhompyutha zakho ze-UC-2100 Series.
  • Wiring Isilumkiso!
  • Bala ubuninzi obukhoyo ngoku kwintambo yamandla nganye kunye nocingo oluqhelekileyo. Qwalasela zonke iikhowudi zombane ezichaza obona buninzi bangoku obuvumelekileyo kubungakanani bocingo ngalunye. Ukuba umsinga ungaphezulu kowona mlinganiselo mkhulu, i-wiring inokutshisa kakhulu, ibangele umonakalo omkhulu kwisixhobo sakho.

ISILUMKO

Qaphela xa uphethe iyunithi. Xa iyunithi iplagiwe, izinto zangaphakathi zivelisa ubushushu, kwaye ngenxa yoko, i-casing yangaphandle inokuziva ishushu kwi-touch.

Ukuqhagamshela Amandla

Qhagamshela i-9 ukuya ku-48 umgca wamandla we-VDC kwi-terminal block, eqhagamshelwe kwikhompyuter ye-UC-2100 Series. Ukuba amandla anikwe ngokufanelekileyo, i-LED "Amandla" iya kukhanyisa ukukhanya okuluhlaza okuqinileyo. Indawo yokufaka amandla kunye nenkcazo yephini iboniswe kumzobo osecaleni. Ibhloko ye-terminal ye-input (CN5) ifanelekile kwi-wire size ye-12 ukuya kwi-30 AWG (3.3 ukuya kwi-0.05 mm2) kunye nexabiso le-torque ye-0.5 Nm (4.425 lb-in).
Umlinganiselo wegalelo: 9 ukuya ku-48 VDC, 0.45 ukuya ku-0.084 A

I-MOXA UC-2100 Series Arm-Based Computers-fig7

Ukuthoba iYunithi

Ukuthoba kunye nendlela yocingo kunceda ukunciphisa iziphumo zengxolo ngenxa yokuphazamiseka kwe-electromagnetic interference (EMI). Qhuba uqhagamshelo lomhlaba ukusuka kwisidibanisi sebhloko ye-terminal ukuya kumphezulu wokumisa phambi kokudibanisa amandla. Nceda uqaphele ukuba le mveliso ihloselwe ukunyuswa kwindawo esemgangathweni, njengepaneli yentsimbi. Ubuncinci bommandla onqamlezayo we-conductor yomhlaba uya kufana nentambo yokufaka intambo.

Ukuqhagamshela kwizibuko leConsole

I-UC-2100 console port yi-4-pin-header RS-232 port ebekwe kwiphaneli yasekunene yecala. Yenzelwe iitheminali ze-serial console, eziluncedo viewukungenisa umyalezo wokuqala, okanye ukulungisa ingxaki yendlela yokuqalisa imiba. Susa isiciko sokukhusela kwi-port ukuze udibanise intambo ye-console.

Uthotho lweConsole Port & Pinouts Uthotho Console Cable
 

Pin Signal

1 TxD

2 RDX

3 NC

4 GND

I-MOXA UC-2100 Series Arm-Based Computers-cable

Ukuqhagamshela kwiNethiwekhi

Amazibuko e-Ethernet abekwe kwiphaneli ephezulu okanye esezantsi yeekhompyuter ze-UC-2100. Izabelo ze-pin ye-Ethernet port zibonisiwe kulo mzobo ulandelayo. Ukuba usebenzisa eyakho intambo, qiniseka ukuba izabelo ze-pin kwi-Ethernet cable connector zihambelana nezabelo ze-pin kwi-Ethernet port.

I-MOXA UC-2100 Series Arm-Based Computers-fig9

  • Isalathisi se-LED kwikona ephezulu ngasekunene sikhazimla umbala oluhlaza oqinileyo xa ikhomputha iseka unxibelelwano nge-100 Mbps yenethiwekhi ye-Ethernet.
  • I-LED iya kukhanya kwaye icime xa iipakethi ze-Ethernet zihanjiswa okanye zamkelwa.
  • Isalathisi se-LED kwikona ephezulu ngasekhohlo sikhazimla umbala o-orenji oqinileyo xa ikhomputha iseka uxhulumaniso kunye nenethiwekhi ye-Ethernet ye-10 Mbps.
  • I-LED iya kukhanya kwaye icime xa iipakethi ze-Ethernet zihanjiswa okanye zamkelwa.

I-MOXA UC-2100 Series Arm-Based Computers-fig8

Iphini Umqondiso
1 ETx+
2 ETx-
3 ERx+
4 -
5 -
6 ERx-
7 -
8 -
  • Kumzekelo we-UC-2112, bhekisa kwezi nkcazo zilandelayo ze-pin eneenkcukacha ze-gigabit Ethernet port.
  • Isalathisi se-LED kwikona ephezulu ngasekhohlo sikhazimla umbala oluhlaza oqinileyo xa ikhomputha iseka uxhulumaniso kunye nenethiwekhi ye-Ethernet ye-100 Mbps.
  • I-LED iya kukhanya kwaye icime xa iipakethi ze-Ethernet zihanjiswa okanye zamkelwa.
  • Isalathisi se-LED kwikona ephezulu ngasekunene sikhazimla umbala o-orenji oqinileyo xa ikhomputha iseka uxhulumaniso kunye nenethiwekhi ye-Ethernet ye-1000 Mbps.
  • I-LED iya kukhanya kwaye icime xa iipakethi ze-Ethernet zihanjiswa okanye zamkelwa.

Ukuqhagamshela kwiSixhobo sothotho

Amazibuko e-serial abekwe kwiphaneli esezantsi yekhompyuter ye-UC-2100. Sebenzisa intambo yothotho ukuqhagamshela isixhobo sakho sothotho kwizibuko lothotho lwekhompyuter. Ezi zibuko ze-serial zineekhonkco ze-DB9 eziyindoda kwaye zinokuqwalaselwa kwi-RS-232, i-RS-422, okanye i-RS-485 yonxibelelwano. Indawo yephini kunye nezabelo zibonisiwe kwitheyibhile elandelayo.

I-MOXA UC-2100 Series Arm-Based Computers-fig10

Iphini RS-232 RS-422 RS-485

(4-ingcingo)

RS-485

(2-ingcingo)

1 I-DCD TxDA(-) TxDA(-) -
2 RxD TxDB(+) TxDB(+) -
3 I-TxD I-RxDB(+) I-RxDB(+) IdathaB(+)
4 I-DTR RxDA(-) RxDA(-) IdathaA(-)
5 GND GND GND GND
6 DSR - - -
7 RTS - - -
8 CTS - - -

Ukuqhagamshela iModyuli yeSelula/Wi-Fi kunye ne-Antenna

Ikhompyuter ye-UC-2104 iza nesokethi enye ye-Mini PCIe yokufakela imodyuli enye yeselula okanye ye-Wi-Fi. Khulula izikrufu ezibini kwiphaneli yangasemva kunye nesikrufu esinye kwiphaneli engezantsi ukususa isigqubuthelo kwaye ufumane indawo yesokethi.

I-MOXA UC-2100 Series Arm-Based Computers-fig11 I-MOXA UC-2100 Series Arm-Based Computers-fig12

Iphakheji yemodyuli yeselula ibandakanya imodyuli yeselula kunye ne-1 screws. Ii-eriyali zeselula kufuneka zithengwe zodwa ukuze zilingane neemfuno zakho zokufakela.

I-MOXA UC-2100 Series Arm-Based Computers-fig13

Landela la manyathelo ukufaka imodyuli yeselula

  • Beka iintambo ze-eriyali ecaleni kwaye ucime isiseko semodyuli engenazingcingo njengoko kubonisiwe kumzobo ukuze kube lula ukufakela.
  • Faka imodyuli yeselula kwisokethi kwaye uqhoboshele izikrufu ezibini (kwiphakheji) phezu kwemodyuli.
  • Qhagamshela iziphelo zasimahla zeentambo ezimbini ze-eriyali ecaleni kwezikrufu njengoko kubonisiwe kumfanekiso.
  • Buyisela isigqubuthelo kwaye usikhusele usebenzisa izikrufu ezithathu. (Ukusetyenziswa kwe-tweezer kuyacetyiswa xa ufaka okanye ususa imodyuli)
  • Izihlanganisi ze-antenna zibekwe kwiphaneli ephezulu yekhompyuter. Qhagamshela i-eriyali yeselula kwizihlanganisi.

I-MOXA UC-2100 Series Arm-Based Computers-fig14 I-MOXA UC-2100 Series Arm-Based Computers-fig15I-MOXA UC-2100 Series Arm-Based Computers-fig16

Iphakheji yemodyuli ye-Wi-Fi ibandakanya imodyuli ye-Wi-Fi eyi-1 kunye nezikrufu ezi-2. Iiadaptha ze-eriyali kunye nee-eriyali ze-Wi-Fi kufuneka zithengwe ngokwahlukeneyo ukuze zilingane neemfuno zakho zokufakela.

  • Landela la manyathelo ukufaka imodyuli yeWi-Fi.
  • Beka iintambo ze-eriyali ecaleni kwaye ucime isiseko semodyuli engenazingcingo njengoko kubonisiwe kumzobo ukuze kube lula ukufakela.
  • Faka imodyuli yeWi-Fi kwisokethi kwaye uqhoboshele izikrufu ezibini (kwiphakheji) phezu kwemodyuli.
  • Qhagamshela iziphelo zasimahla zeentambo ezimbini ze-eriyali ecaleni kwezikrufu njengoko kubonisiwe kumfanekiso.
  • Faka indawo yesigqubuthelo kwaye uyikhusele ngezikrufu ezithathu. (Sincoma ukusebenzisa i-tweezer xa ufaka okanye ususa imodyuli)
  • Qhagamshela iiadaptha ze-eriyali kwizihlanganisi kwiphaneli ephezulu yekhompyuter.
  • Qhagamshela ii-eriyali ze-Wi-Fi kwiiadaptha ze-eriyali.

I-MOXA UC-2100 Series Arm-Based Computers-fig18

I-MOXA UC-2100 Series Arm-Based Computers-fig19 I-MOXA UC-2100 Series Arm-Based Computers-fig20

 

Ukufakela iiSIM Cards

  • Kuya kufuneka ufake iSIM khadi kwikhompyuter yakho ye-UC-2104. Landela la manyathelo ukufaka ikhadi leSIM.
  • Susa isikrufu kwisigqubuthelo esibekwe kwiphaneli yasekunene ye-UC-2104.
  • Faka ikhadi leSIM kwisokethi. Qinisekisa ukuba ubeka i-chip-side ezantsi.
  • Ukususa iSIM khadi, tyhala nje iSIM khadi kwaye uyikhulule.

Ukufakela iKhadi leMicroSD

  • Zombini i-UC-2111 kunye ne-UC-2112 Series iza nepokotho yokugcina evumela abasebenzisi ukuba bafake ikhadi le-MicroSD enye. Landela la manyathelo ukufaka ikhadi leMicroSD:
  • Isokethi ye-MicroSD ibekwe ngezantsi kwephaneli yasekunene yekhompyuter. Khulula isikrufu kwaye ususe isigqubuthelo sepaneli esisekunene.
  • Faka ikhadi leMicroSD kwisokethi. Qinisekisa ukuba ikhadi lifakwe kwicala elifanelekileyo.
  • Faka indawo yesigqubuthelo kwaye ubophe isikrufu kwisigqubuthelo ukuze ukhusele isigqubuthelo.
  • Ukususa ikhadi leMicroSD, tyhala nje ikhadi kwaye ulikhulule.

I-MOXA UC-2100 Series Arm-Based Computers-fig23 I-MOXA UC-2100 Series Arm-Based Computers-fig24

Ukulungelelanisa i-DIP Tshintshela

  • Iikhomputha ze-UC-2101, UC-2111, kunye ne-UC-2112 Series ziza kunye nokutshintsha kwe-DIP enye kubasebenzisi ukunyenyisa iiparamitha ze-serial port. Ukuseta iswitshi yeDIP, yenza oku kulandelayo:
  • Susa izikrufu kwikhava ye-DIP yokutshintsha ebekwe kwiphaneli yangasemva yekhompyuter.
  • Susa ifilimu ebhityileyo kwiswitshi ye-DIP kwaye ulungelelanise ukusetwa njengoko kufuneka.
  • Jonga kwitheyibhile engezantsi malunga noseto lokutshintsha kweDIP. Ixabiso elimiselweyo IVIMILE.

I-MOXA UC-2100 Series Arm-Based Computers-fig25

SW 1 2 3 4
Phantsi Phezulu Ixesha. N / A
ON 1KΩ 1KΩ 120Ω N / A
CIMA 150KΩ 150KΩ N / A N / A

QAPHELA

  • Isixhobo siya kusetyenziswa kuphela kwindawo engekho ngaphezulu kwe-2 yedigri yongcoliseko, njengoko kuchaziwe kwi-IEC/EN 60664-1.
  • Isixhobo siya kufakwa kwindawo evalelekileyo ebonelela ngenqanaba lokhuseleko elingekho ngaphantsi kwe-IP 54 ngokuhambelana ne-IEC/EN 60079-15 kwaye ifikeleleke kuphela ngokusetyenziswa kwesixhobo.
  • Ezi zixhobo zizixhobo zohlobo oluvulekileyo eziza kufakwa kwindawo ebiyelweyo kunye nesigqubuthelo esisuswayo okanye umnyango, olungele indawo engqongileyo.
  • Esi sixhobo sikulungele ukusetyenziswa kwiKlasi I, iCandelo 2, amaQela A, B, C, kunye no-D okanye kwiindawo ezingenabungozi kuphela.

ISILUMKO

Umngcipheko wogqabhuko-dubulo ukuba ibhetri itshintshwe luhlobo olungachanekanga. Lahla iibhetri ezisetyenzisiweyo ngokwemigaqo yendawo.

KUBALULEKILE!

Izixhobo zijoliswe ukuba zibonelelwe nge-UL Uluhlu lwangaphandle lwamandla ombane, ophumayo udibana ne-SELV kunye ne-LPS kwaye ulinganiswe kwi-9 ukuya kwi-48 VDC, ubuncinane be-0.45 kwi-0.084 A, kunye
ubuncinane Tma = 75°C.

Amaxwebhu / Izibonelelo

I-MOXA UC-2100 Series Arm-Based Computers [pdf] Isikhokelo soFakelo
UC-2100 Series, Arm-Based Computers

Iimbekiselo

Shiya uluvo

Idilesi yakho ye-imeyile ayizupapashwa. Iindawo ezifunekayo ziphawulwe *