Ukunqanda inguquko, ukuguquka kombala okanye omnye umonakalo omkhulu, musa ukubeka esi sixhobo kwindawo enye kwezi zilandelayo:

• ukukhanya kwelanga ngqo
• ubushushu obugqithisileyo okanye ukufuma
• iindawo ezinothuli kakhulu okanye ezimdaka
• iindawo zemagneti
• ukufuma okuphezulu okanye ukufuma
• iintshukumo ezinamandla okanye ukothuka

Ukucoca

Coca kuphela ngelaphu elithambileyo, elomileyo. Ukuba kuyimfuneko, thambisa ilaphu kancinci. Musa ukusebenzisa izicoci ezirhabaxa, ukucoca utywala, izinto zokuthambisa ipeyinti, iwax, izinyibilikisi, ulwelo lokucoca, okanye amalaphu okusula afakwe imichiza.

Ukusebenza 

• Nceda ungasebenzisi amandla agqithisileyo ekusebenzeni izinto zolawulo zeyunithi.
• Thintela isinyithi, iphepha okanye ezinye izinto ekungeneni kwiyunithi.
• Nceda ungayishiyi iyunithi, kwaye uphephe imivumbo enzima.
• Nceda ungayiguquli iyunithi ngaphandle kwesigunyaziso.
• Ukuba kufuneka ulungiso, nceda uqhagamshelane ne-MOOER Customer Service Centre ukuze ufumane inkcazelo engakumbi

Uqhagamshelwano 

Ngalo lonke ixesha cima / cima umbane kwi-GS1000 kunye naso nasiphi na esinye isixhobo phambi kokudibanisa okanye ukuqhawula iintambo zesignali. Oku kuya kunceda ukuthintela ukungasebenzi kunye / okanye umonakalo kwezinye izixhobo.
Kwakhona qiniseka ukuba uqhawula zonke iintambo zoqhagamshelwano kunye nonikezelo lombane phambi kokuba uhambise isixhobo.

IIMBONAKALO

• Iyunithi yokuqala yeziphumo zehardware kuthotho lwe-GS ukubonisa iprofayile yekhabhinethi yesithethi
• Ukukhetha phakathi kwe-GS1000 (inguqulo yemveli kunye ne-adapter yamandla) kunye ne-GS1000 Li (uguqulelo oluhlanganisiweyo lwe-7.4 V / 4750 mAh ibhetri ye-lithium-ion yokusebenza ngaphandle kokuphazamiseka ngaphandle kokunikezelwa kwamandla angaphandle)
• Izibane ze-Ambient ze-LED zidibanisa ngokugqibeleleyo amava okubonwayo kunye nesandi
• Isikrini esikhulu esine-5 ″ enenkcazo ephezulu ene-UI eqondakalayo, inikezela ngamava amatsha aneempembelelo ezininzi
• Ibandakanya ngaphezulu kwe-350 yeemodyuli zesiphumo sokuqala
• Ixhasa ukukhutshelwa kwe-MNRS amp Ukulinganisa sample data ibe iyonke 30 indawo yokugcina simahla
• Ulwakhiwo oluthambileyo lwe-doal-chain effect kwi-scenarios yokusetyenziswa ngakumbi kunye neemfuno zoyilo
• Isiqendu seMNRSampitekhnoloji ye-ling ngu-MOOER ivumela ukuchazwa kweempawu zesandi kwiintlobo ezine ezahlukeneyo zesixhobo: ukugqwetheka/iipedhali zokuqhuba kakhulu, ngaphambiliamps, gqiba ampiilifiya kunye neekhabhathi zesithethi, ukuze ukwazi ukuphatha izixhobo zakho ozithandayo ujikeleze "kwibhegi yegiya" yakho.
• Ixhasa ukhuphelo lwekhabhathi ye-IR yomntu wesithathu ukulinganisa sample files kunye njengokoample ubungakanani 2048 amanqaku, ibe iyonke 30 indawo yokugcina free
• Unxibelelwano oluninzi olukhoyo ukuhlangabezana neemfuno zomsebenzisi kwiimeko ezahlukeneyo, kubandakanya i-1/4 ″ igalelo lesixhobo, igalelo lemakrofoni ye-XLR kunye neziphumo ezimbini ezilinganayo 1/4″
• Iinketho ezibanzi ze-I / O zibonelela ngokuguquguquka kwe studio, stage kunye nezicelo zokuziqhelanisa
• Uthotho / oluhambelanayo lwe-TRS stereo effect loops eneendawo ezihlengahlengiswayo kwikhonkco lesiphumo zinokusetwa ukuxhasa ulungelelwaniso lwakho oluthandayo lwerig
• Ixhasa uxhulumaniso lwepedali yokubonisa yangaphandle ukulawula iiparamitha zesiphumo okanye umthamo
• Ixhasa uqhagamshelo kwi-MOOER F4 ye-wireless footswitch kwiinketho zolawulo olwandisiweyo
• I-Sub-Patch yendlela yokubeka ngokwamaqela ivumela ukutshintshela ngokungenamthungo kweentlobo zethowuni kunye neeparamitha ngelixa ugcina imisila yesiphumo
• Ixhasa ukudlala kwakhona kwigalelo leaudiyo yeBluetooth ukuziqhelanisa kunye nokudlala okukhatshwayo
• Imowudi yesiKhululo saseGroove esinoMatshini weDrum kunye neempawu zeLooper ezinokudityaniswa, esona sixhobo sigqibeleleyo sokuyila kunye nokuziqhelanisa.
• Isixhobo esichanekileyo sokwakha isixhobo setuner
• Thepha ulawulo lwetempo kwiziphumo ezisekwe kwitempo kunye noMshini weGubhu
• Iisetingi ze-Global EQ ezihlengahlengiswayo ukuze kudityaniswe lula kulo nakuphi na ukuseta kunye neziphumo ezintle ngazo zonke iintlobo ezahlukeneyo zezixhobo kunye noqwalaselo lwendawo.
• I-AI ye-Innovative Equalizer ibonelela ngenkuthazo ngakumbi yohlengahlengiso lwethoni esekwe kwizitayile zomculo kunye neentlobo
• Programmable MIDI izibuko ze MIDI IN okanye MIDI OUT ukuvumela ulawulo kwizixhobo zangaphandle okanye ukulawula ezinye izixhobo
• Uhlobo C lwezibuko le-USB:
  • Ujongano oluvakalayo olusezantsi lwe-ASIO USB (Uhlobo-C) luxhasa ukuya kuthi ga kwi-192 kHzample rate, ebonelela ngesisombululo esisodwa kwiimvumi eziqeqeshiweyo
  • USB MIDI umsebenzi (bona MIDI )
  • Ixhasa uqhagamshelo kwisoftware ye-MOOER Studio kwikhompyuter
  • Uhlaziyo lweFirmware ngesoftware yePC
• Isoftware yekhompyuter ezinikeleyo kunye nesoftware yeselula ekhoyo yokukhuphela kunye nokwabelana ngokuseta kwangaphambili kunye ne-samples, ukuhlela isandi, ii-backups, uhlaziyo lwe-firmware kunye nokufikelela kwilifu kwithala leencwadi elikhulu elenziwe ngabasebenzisi kwihlabathi liphela.

ULAWULO

1. Ukutshintsha amandla: Cinezela malunga nemizuzwana emi-3 ukuvula okanye ukuvala isixhobo. Cofa kwaye ubambe ngaphezulu kwemizuzwana eyi-10 ukuze uqalise kwakhona.
2. 5″ Isikrini sokuchukumisa: Ibonisa isimo kunye nolwazi malunga nokuseta kwangaphambili kunye neendlela zokusebenza.
3. Iqhosha lasekhaya: Cofa ukubuyela kujongano lomsebenzisi ophambili okanye utshintshe phakathi kwe-Stage View kwaye Hlela View.
4. Iqhosha eliyintloko: Jikelezisa ukulungelelanisa umthamo wemveliso iyonke.
5. Gcina iqhosha: Cinezela ukugcina useto lwakho kwi-Preset.
6. Iqhosha leprofayili: Cofa ukufaka i-MNRSampi-ling menu (jonga iProfayili).
7. Khetha iqhosha: Sebenzisa ukukhetha useto lwangaphambili, hambisa iimodyuli okanye uhlele iiparamitha.
   Jikelezisa iqhosha ukuze ukhethe izinto ezikwisikrini (igqanyisiwe).
   Cofa iqhoshana ukuqinisekisa ukhetho.
   Jikelezisa iqhosha ukutshintsha amaxabiso.
   Cofa ukubuyisela amaxabiso angagqibekanga.
8. Ibha yokukhanya ejikeleze: Ibonisa iinkalo ezininzi zokusebenza kwiimeko ezahlukeneyo:
   Ilayita ngaphezulu kwe-footswitch esebenzayo (ukusetha kwangaphambili)
   Ukuqhwanyaza ukubonisa itempo yempompo
   Ibonisa isicwangciso separameter xa iiparamitha zihlengahlengiswa
9. I-Footwitch A:
   • kwimo yokuSeta kwangaphambili: tshintsha ukuya kuSeta kwangaphambili A kwibhanki ekhethiweyo
   • cofa kwakhona ukufaka imo ye-CTRL
   • kwimo ye-CTRL: yenza umsebenzi wolawulo ocwangcisiweyo kwangaphambili (bona i-CTRL MODE).
   • kwimodi yesiKhululo saseGroove: IRekhodi yeLooper / Dlala / Dub / Hlehlisa (jonga iGROOVE STATION).
10. Unyathela u-A + B ngaxeshanye:
    Cinezela zombini izitshixo zeenyawo ukuvula imowudi yokhetho lweBhanki kwaye uskrolele ezantsi kwiibhanki (jonga iiBhanki).
    Bamba zombini iinguqu zeenyawo ukuvula imo yeTuner (jonga iTuner).
11. I-Footwitch B:
    • kwiNdlela yokuSeta kwangaphambili: tshintshela kwi-Preset B kwibhanki ekhethiweyo
    • cofa kwakhona ukufaka imo ye-CTRL
    • kwimo ye-CTRL: yenza umsebenzi wolawulo ocwangcisiweyo kwangaphambili (bona i-CTRL MODE).
    • kwimo yeGroove Station: Looper Stop / Cima (jonga iGROOVE STATION).
12. Unyawo C:
    • kwimo yokuSeta kwangaphambili: tshintshela ku-Preset C kwibhanki ekhethiweyo
    • cofa kwakhona ukufaka imo ye-CTRL
    • kwimo ye-CTRL: yenza umsebenzi wolawulo ocwangcisiweyo kwangaphambili (bona i-CTRL MODE).
    • kwimo yesiKhululo saseGroove: Thepha i-Tempo Input kuMashini weDrum (jonga iGROOVE STATION).
13. Uthoba iinyawo C + D ngaxeshanye:
    Cinezela zombini izitshixo zeenyawo ukuvula imowudi yokhetho lweBhanki kwaye uskrolele phezulu kwiibhanki (jonga iiBhanki).
    Bamba zombini izitshixo zeenyawo ukuvula iNdlela yesiKhululo saseGroove (bona iGROOVE STATION).
14. I-Footwitch D:
    • kwimo yokuSeta kwangaphambili: tshintshela ku-Preset D kwibhanki ekhethiweyo
    • cofa kwakhona ukufaka imo ye-CTRL
    • in Imo ye-CTRL: yenza umsebenzi wolawulo ocwangciswe kwangaphambili (bona CTRL MODE).
    • kwimo yesiKhululo saseGroove: Utshintshela/ucime umatshini weDrum (jonga iGROOVE STATION).

IZIXHOBO

1. EXP: I-1/4″ ijekhi ye-stereo ye-TRS yokudibanisa i-pedal yokubonisa yangaphandle (nceda usebenzise i-TRS yokubonisa i-pedal enoluhlu lokumelana ne-10 – 100 kΩ – bona i-Expression Pedal).
2. ISIGCAWU KU/ IGALELO L: 1/4 ″ i-mono audio jack, igalelo kwisiginci sakho okanye isixhobo se-bass. Ijekhi yokufaka ekhohlo kuqwalaselo lwesitiriyo.
3. I-MIC IN / IGALELO R: 1/4″ kunye ne-XLR ijekhi edibeneyo. Qhagamshela imakrofoni usebenzisa isinxibelelanisi se-XLR okanye uqhagamshele isixhobo / isiginali yomgca usebenzisa i-1/4″ isidibanisi. Ijekhi yegalelo lasekunene kuqwalaselo lwestereo.
4. Ukufumana iMIC: Fumana iqhosha lokuhlengahlengisa kwigalelo lemakrofoni.
5. 48 V: Phantom amandla toggle iswitshi igalelo imakrofoni.
6. FX LOOP THUMELA: 1/4″ ijekhi yomsindo westereo. Uqhagamshelwano kwigalelo leempembelelo zangaphandle. Ukuqhagamshela isixhobo sangaphandle se-stereo kufuna ukusetyenziswa kwe-TRS kwintambo yeadaptha ye-TS ephela kabini (eboniswe ngezantsi).
7. FX LOOP RETURN: 1/4″ ijekhi yomsindo westereo. Uxhulumaniso oluvela kwimveliso yeziphumo zangaphandle.
   Ukuqhagamshela isixhobo sangaphandle se-stereo kufuna ukusetyenziswa kwe-TRS kwintambo yeadaptha ye-TS ephela kabini (eboniswe ngezantsi).
   
   (I-TRS ukuya kwintambo yeadaptha ye-TS ephela kabini)
8. Iziqhagamshelo zemveliso (ekhohlo/ekunene): 1/4 ″ iijacks ze-TRS ezilungelelanisiweyo. Qhagamshela intambo ye-3-conductor (TRS) ukuhambisa isignali elinganayo. Xhuma intambo ye-2-conductor (TS) ukuhambisa isignali engalinganiyo. Qhagamshela le jack kwigalelo le ampi-lifier, enye iyunithi yeziphumo okanye nasiphi na isixhobo esivakalayo.
9. Iifowuni: 1/8 ″ i-headphone ye-stereo yokukhupha i-jack
10. I-MIDI IN/OUT: 1/8″ TRS MIDI isinxibelelanisi ukuqhagamshela kwisixhobo sangaphandle esinokulawula i-GS1000 okanye isixhobo esinokulawulwa yi-GS1000.
11. Ujongano lwe-USB Type C: Uqhagamshelo kwikhompyuter kwimisebenzi ye-audio ye-USB okanye ukusebenzisa isoftware exhaswayo yokuhlelwa kweparamitha okanye uhlaziyo lwe-firmware (jonga i-USB Audio, bona i-MOOER Studio).
12. Igalelo lamandla e-VDC eli-9: Qhagamshela iadaptha yonikezelo lwamandla ombane.
    

ISIGAMA

Eli candelo lichaza isigama esisetyenziswe kule ncwadana. Ukuqonda isigama kuya kukunceda uqonde imixholo yencwadana.

Seta kwangaphambili: 

• Uqwalaselo lwesandi olucwangciswe kwangaphambili, ngokuqhelekileyo lubandakanya izicwangciso zeziphumo ezisetyenziswa kwikhonkco leempembelelo kunye neeparamitha zazo.
• Ukusetwa kwangaphambili kugcinwa kwindawo yokugcina eboniswe yinombolo yebhanki (01 - 50) elandelwa yileta esele isetyenzisiwe (AD). Ii-4 ze-presets kwibhanki nganye zingakhethwa kunye ne-A, B, C okanye i-D footswitch.

Ikhonkco leziphumo: 

• Ulandelelwano lweziphumo umqondiso kufuneka udlule ngaphakathi kwe-GS1000 ukufumana ukusuka kumagalelo ukuya kwiziphumo.

Imodyuli yesiphumo: 

• Udidi oluqhelekileyo lweemodeli zeziphumo ezinokubekwa kwikhonkco leempembelelo, njenge AMP (amp iimodyuli), i-CAB (iimodyuli zokulinganisa ikhabhinethi), i-REVERB (iimodyuli zereverb) njalo njalo.

Uhlobo lwesiphumo: 

• Isiphumo esithile ngaphakathi kodidi lwesiphumo, esifana ne "Red Compressor" kudidi "DYNA".

Isiphumo slot: 

• Indawo engenanto kwitsheyini yeziphumo iboniswa njenge . Cofa isimboli ukulayisha isiphumo kule ndawo.

Stage View: 

• Imowudi yojongano oluphambili ebonisa ulwazi oluququzelela stage intsebenzo kwaye ibalaselisa amanani asetwe kwangaphambili kunye namagama ukubonelela ngokubonakala okuhle.

Hlela View: 

• Imowudi yojongano oluphambili lokuhlelwa kwesandi, ebonisa ukusetwa kwangaphambili okukhethiweyo, ukubunjwa kwekhonkco leempembelelo, ubume beemodyuli zempembelelo kwikhonkco, inqanaba levolumu esekwe kwangaphambili, izicwangciso ze-BPM zangoku kunye namanqanaba okufakwayo / okuphumayo. Ikwabonisa ubume bebhetri ye-GS1000 Li kwaye ibonelela ngokufikelela kwezinye iimenyu zoseto.

Imo yokulawula i-Stompbox (Imo ye-CTRL): 

• Imowudi yokulawula ngokuthe ngqo imo yokuvula/yokuvala ukuya kuthi ga kwiimodyuli ezine zesiphumo kwikhonkco leempembelelo okanye itempo yempompo yeeparamitha ezikhethiweyo usebenzisa ukutshintshwa kweenyawo ezine kumqolo osezantsi.
  Le ndlela ikwavumela utshintsho oluntsonkothileyo loqwalaselo ngenyathelo elinye kwi-footswitch (SUBPATCH switching). Izitshixo zeenyawo zinokucwangciswa ngokuzimeleyo ngomsebenzi wazo othile we-CTRL. (Jonga Imo ye-CTRL.)

Isitishi saseGroove: 

• Imowudi edibanisa ulawulo lweDum Machine kunye nemisebenzi yePrase Looper. Igubu
  Umatshini kunye neLooper inokudityaniswa kwakhona kule modi. (Jonga ISIKHULULO saseGROOVE.)

Iprofayile ye-MNRS: 

Ungasebenzisa iMooer Non-linear Response Sample teknoloji ukubamba iimpawu zesandi zesixhobo sakho somzimba osithandayo usebenzisa umsebenzi weProfayili yeGS1000.
Oku kuxhasa iindlela zokubanjwa kweendlela ezahlukeneyo zestompboxs (okt ukugqwesa / ukuqhubela phambili), ngaphambiliamps, combo amps okanye iikhabhathi zesithethi.

Indawo

• I-Nodes ngamanqaku kwikhonkco lesiphumo apho umqondiso unokuhanjiswa kumatyathanga amabini ahlukeneyo okanye adityaniswe ukusuka kumatyathanga amabini ukuya kwelinye (kuxhomekeke kwisakhiwo somzila wesignali osilungisileyo).
• Kukho "iindawo eziqhekezayo" ezahlula imiqondiso kunye "nodimi lokuxuba" oludibanisa iimpawu.
  Ngokuxhomekeke kwimeko yokusetyenziswa, iiparamitha ezininzi zinokuhlengahlengiswa kwiinodi zomntu ngamnye.

UMDLALO WONXIBELELWANO

UKUQALA NGOKUKHAWULEZA

Ukuqala eqala 

• Qhagamshela amagalelo kunye neziphumo zesixhobo njengoko kufuneka ngokomzobo woqhagamshelwano ongentla.
• Jika iqhosha levolyum ye-MASTER phantsi ukuze unciphise umthamo wemveliso.
• Xhuma unikezelo lwamandla olubandakanyiweyo (i-GS1000 Li inokusebenza kumandla ebhetri) kwaye uvule isixhobo ngokucinezela i-Power switch.
  Umboniso ubonisa isikrini sokuqalisa imizuzwana embalwa.
• Emva kokuba ulandelelwano lwe-boot lugqityiwe kwaye isikrini sibonisa ujongano oluphambili lomsebenzisi, lungisa ivolumu ye-MASTER kwivolumu efanelekileyo.
  MASTER iqhosha levolumu
  
  Ukutshintsha amandla
  

Ujongano lomsebenzisi oluphambili 

I-GS1000 iza neendidi ezimbini zojongano oluphambili: i-STAGE VIEW kunye ne-HLELA VIEW.
Ungasebenzisa i HOME iqhosha ukuswitsha phakathi kwezi zimbini views.

Stage View 

Olu jongano lubalaselisa inani kunye negama lokusetwa kwangaphambili, okwenza kube lula kubadlali ukugcina umkhondo wesandi esikhethiweyo ngoku ngexesha lemidlalo ephilayo.
Siye sayila iinguqulelo ezimbini ezahlukeneyo zeSTAGE VIEW: imo "yeNgcaciso", ebonisa inani kunye negama lokuseta kwangaphambili okukhethiweyo kunye nomboniso womzobo wetsheyini leziphumo, kunye nemowudi "Enkulu", ebonisa kuphela inani kunye negama lokucwangciswa kwangaphambili ukuze kubonakale ngcono kwi s.tage.
Unokukhetha okuthandayo view phantsi ko-"Useto-Olukhethwayo". (Bona uStage View umboniso)

• Stage View: Imo yeenkcukacha
  
• Stage View: Imowudi enkulu
  

Chukumisa iintolo zasekhohlo/ekunene kwisikrini okanye ujikelezise iqhosha KHETHA ukutshintsha useto lwangaphambili kwesi sikrini.
Emva kokuqaliswa, isixhobo asigqibekanga ukubonisa ujongano oluphambili. Chukumisa isikrini okanye ucinezele iqhosha elithi KHETHA okanye iqhosha le-HOME ukufaka ujongano oluphambili lokuhlela (Hlela View)

Hlela View 

• Phantse yonke imisebenzi yolawulo ye-GS1000 igxininiswe kwi-EDIT VIEW isikrini sojongano lomsebenzisi.
  Apha kulapho ufikelela khona iiparamitha zesiphumo sokuhlela, uzisa uludwe loseto lwangaphambili, gcina useto lwangaphambili, uhlengahlengiso lwehlabathi jikelele kunye neziphumo, kwaye uvule iSikhululo saseGroove okanye iTuner, okanye ufikelelo kwiisetingi zenkqubo kunye nezinye iimpawu.
  

Seta kwangaphambili ukhetho 

I-preset ichongiwe ngenombolo yayo yebhanki (01-50), ilandelwa yileta (AD).
Umtya wokukhanya ojikeleze i-ambient ye-A/B/C/D ibonisa ukusetha kwangaphambili okukhethiweyo. Kukho iindlela ezininzi zokukhetha ukusetha kwangaphambili emva kokuba i-pedal inikwe amandla:

1. Kwi-Stage View: cofa iintolo zasekhohlo/ekunene kumacala omabini esikrini.
2. Kulo naluphi na ujongano olungundoqo (Stage okanye Hlela view): Jikelezisa iqhosha le-KHETHA ukukhetha ukusetha kwangaphambili.
3. KuHlela View: Cofa kwindawo yegama esetwe ngaphambili kwikona ephezulu ngasekhohlo ukwandisa uluhlu kwaye ukhethe ukusetha kwangaphambili.
4. Tshintshela ngokuthe ngqo phakathi kwezinto ezine ezisetyenzisiweyo kwibhanki yangoku usebenzisa i-A/B/C/D footswitches xa i-pedal ikwimowudi yokusebenza rhoqo (I-strip ye-LED ilayite ngaphezu kwesinye seenyawo ezine).

Ukutshintsha kweBhanki 

• Nyathela ku-A+B okanye ku-C+D ngaxeshanye ukuze uvule isikrini sokukhetha ibhanki.
  Isikrini sibonisa iibhanki ezimbini ezine-presets ezine nganye.
  Umqolo osezantsi oqhwanyazayo ubonisa ibhanki ekhethiweyo ngoku.
• Tshintshela kwibhanki yangaphambili ngokunyathela ku-A+B ukutshintshwa kweenyawo ngaxeshanye.
• Tshintshela kwibhanki elandelayo ngokunyathela iC+D footswitches ngaxeshanye.
• Unako kwakhona ukujikelezisa iqhosha KHETHA ukukhetha ibhanki.
• Bamba u-A+B okanye u-C+D phantsi ukuze ukhangele ngokukhawuleza kwiibhanki.
• Cinezela enye yeenguqu zeenyawo ze-A/B/C/D ukukhetha ukusetha kwangaphambili kwibhanki ekhethiweyo kwaye ubuyele umva kwesikrini esikhulu.

IiNgcaciso zesilumkiso zeFCC

Esi sixhobo sivavanyiwe saza safunyanwa ukuba sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo.
Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Isilumkiso: Naluphi na utshintsho okanye uhlengahlengiso kwesi sixhobo olungavunywanga ngokuthe ngqo ngumenzi lunokutshitshisa igunya lakho lokusebenzisa esi sixhobo.

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Ukusebenza kuxhomekeke kwezi meko zimbini zilandelayo: (1) Esi sixhobo asinakubanga luphazamiseko luyingozi, kwaye (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Esi sixhobo sivavanyiwe ukuze sihlangabezane neemfuneko zokuba sesichengeni seRF ngokubanzi Esi sixhobo sithobela imida yokuba sesichengeni ngemitha yeFCC emiselwe indawo engalawulwayo.

Esi sixhobo kufuneka sifakwe kwaye sisebenze umgama ongaphantsi kwama-20cm phakathi kweradiyetha kunye nomzimba wakho.