Izivuleli zeLinear Gate CW-SYS Isivamvo sokuPhuma ngaphandle kwamacingo kunye neNcwadana yoMyalelo yoLungiso lokuziva

YINTONI ESEBHOKISINI

1. ISENSOR "PUCK"
   
2. ISIHLANGANISI
   
3. IZIKURU ZE-AUGER (2)
   
4. IBETHRI CR123A ENEZIKOLIphu ZEBETHRI (2)
   
5. 3 '(1 m.) I-COAXIAL CABLE
   
6. TERMINAL BLOCK SCREWDRIVER
   

NGOKUKHETHA

• 12VDC unikezelo lwamandla

(Icandelo #CW-PSU)

INOMBOLO YESIRIYELI

Kukho inombolo yesiriyeli yebhakhowudi ngasemva kwi-Integrator, ezantsi kwe-puck, nakwibhokisi yemveliso. Xa ufowuna ukuze uthethe ngemveliso yakho, nceda ube nenye yezi nombolo ikufutshane.

UKUFAKWA KWEEBHETRI/IBHATHI EPHANTSI

1. Sebenzisa I-CR123A iibhetri kunye ne-polarity kunye netheminali yebhetri kwi-puck.
2. Ukuba iibhetri zifakwe ngasemva, aziyi kuqhagamshelana.
3. Tyhiliza iibhetri kwindawo ngokupheleleyo ukuze uqhagamshelane.
4. Cofa isibambi sebhetri yeplastiki phezu kwebhetri nganye nakwitheminali yebhetri.
5. Isivamvo soluvo siyakuzinika amandla ngokuzenzekelayo xa iibhetri zifakiwe.

IBHETRI ELISEZANTSI

Xa iibhetri zifuna ukutshintshwa kwinzwa, i-Integrator iya "kuntyiloza" kwaye i-LED yayo iya kudanyaza RED.
Xa uqhagamshelwe kwigalelo lezowuni yenkqubo yangaphandle (bona #10 ngezantsi), dwelisa into oyifunayo ukuze ubonise ibhetri ephantsi.

TSHINTSHA ZOMBINI IIBHETRI.
MUSA UKUZISEBENZISA IZINTO EZITSHATSHWAYO.

UKUHLAZIYA

INKQUBO YAKHO IBANTSIWE KWIFACTORY.
EZI MALATHELO ZISEBENZA XA UMANGANISWE IIyunithi EZONGEZELELWEYO

Ungadibanisa ukuya kutsho kwiipucks ezili-10 kunye nenani elingenamkhawulo labaHlanganisi

1. Zisa isivamvo kufutshane ne-Integrator kwaye unike amandla uMhlanganisi (jonga #10 ngezantsi).
2. Cofa iqhosha lokubhanqa kwi-Integrator (iya kuhlala kwimo yokudibanisa imizuzu engama-30).
3. Yehlisa kwaye unyuse inzwa ngokukhupha kwaye uphinde ufake ibhetri enye (jonga #3 ngasentla).
   
4. Umhlanganisi uyakukhala amaxesha ama-3 xa edityaniswe kwaye aphume kwimo yokubhanqa ngokuzenzekelayo.

KWINJONGO	EMHLABENI	KWIINDLELA YOKUQHUBA
	Beka uphawu oluhambelanayo ukuqhuba Beka ngaphantsi komhlaba• Izikrufu ze-Auger puck ekhuselekileyo Musa ukusigquma isiciko se-puck• Pakisha ubumdaka/ingcaipaki Gcina isiciko se-puck sicocekile

ISILUMKISO: GCINA ISICIKO SINGENABUCHULE, INGCA, IKHEPHU, KUNYE NABO BONKE AMAXESHA UKUBA UVUMELE USAZISO LWErediyo!

INDLELA YOVAVANYO YESENSOR PUCK

Imowudi yovavanyo ivumela i-sensor puck ukuba isasaze ngokuzenzekelayo isignali yerediyo ngaphandle kokwenza inzwa ngesithuthi. Oku kuluncedo xa uvavanya uluhlu lwesiginali yerediyo (bona #6 ngezantsi).

1. Cinezela kwaye UBAMBA iqhosha kwi-sensor puck imizuzwana emi-2
2. I-LED ebomvu iya kuqhwanyaza nganye yesibini xa ikwimo yovavanyo
3. Kuya kubakho usulelo olukhawulezileyo
4. Ugqithiso olongezelelweyo luya kwenzeka rhoqo kwimizuzwana ye-10
5. Imo yovavanyo iya kuphuma xa iqhosha licofa kwakhona imizuzwana emi-2
6. Imowudi yovavanyo iya kuphuma ngokuzenzekelayo emva kwemizuzu engama-30
   

UHLELO LOVAVANYO

Isixokelelwano sakho sinoluhlu lwerediyo ubuncinci buzinyawo ezingama-350 okanye ngaphezulu kwe-1000' yomgca wokubona.
Ukumisela uluhlu kwisicelo sakho, vavanya ngaphambi kofakelo lokugqibela.
Uluhlu lwerediyo luxhomekeke kwizinto ezininzi ezahlukeneyo:

• Ifakwe njani ipakhi (emhlabeni okanye ngaphezulu komhlaba eposini)
• Imiqobo ethintela umqondiso wonomathotholo, njengomhlaba, imithi, i-foilage, izakhiwo, ikhonkrithi, njl.

Ukuvavanya uluhlu:

1. Beka i-Integrator kufuphi nendawo yayo yokugqibela yofakelo ekhaya okanye esangweni.
2. Kuya kufuneka uqinisekise ukuba uMhlanganisi uyavakala (jonga #9 ngezantsi).
3. Faka isivamvo kwimowudi yovavanyo (jonga #5 ngasentla).
4. Mamela uMhlanganisi aqalise. Ukuba ayenzeki, sondeza isivamvo kwi-Integrator.
5. Qinisekisa ukuba uvavanya kwakhona ngepuck efakwe emhlabeni (jonga #8 ngezantsi).
6. Kusenokufuneka ukuba wongeze umntu ophindayo ngaphakathi kwekhaya (bona #9 ngezantsi).

UKUBEKA UBUNTU

LUNGISELELA KUPHELA (EZANTSI) UBUNENTEKO UKUBA UFAKA PHAKATHI ENDLELA YOKUQHUBA (jonga #8 ngezantsi). KUZO ZONKE AMANYE IMIQATHA SEBENZISA OKOKUSILILELA.

ULUNGISELELO LOBUNTU
PHEZULU (Okuhlala kukho) Ibona isithuthi esihamba 5 MPH 12-14' kude1 & 2 kwindawo OFF
PHAKATHI Ibona isithuthi esihamba 5 MPH 6-8' kude1 ON & 2 OFF indawo
PHANTSI Ibona isithuthi esihamba 5 MPH 2-4' kude1 & 2 kwindawo ON

PHAWULA: OONA BUNANTULULO BUPHAKAMILEYO KUKUTSHINTSHO KWEDIP KWI-OSITION YOCIMILEYO

UKUFAKA I-PUCK YOMVA

ISILUMKISO: IINGXOWA ZOKUKHIPHA KWI-PUCK IYA KUXHWA. SUKUQINISA KAKHULU NGE-SCREW gun OKANYE FUMANA & UPHUMELE RHOQO. UKUBA IZIKRHU ZISHIYIWE, THENGA IZIKURU ZEZINTSIMBI EZINGASINI ESIDE, EZIZIFANELEYO IPLASTIKI.

I-sensor puck inokufakwa kwi-driveway, emhlabeni okanye kwinto engenakushukunyiswa (iposi, umthi, njl.).

KWINJONGO (jonga umfanekiso ezantsi ekhohlo)

1. Xa uluhlu luvavanyiwe (jonga #6 ngasentla), isiciko sesitulo ngokukhuselekileyo kwipukhi enezikrufu ezinikiweyo. Kufuneka kungabikho msantsa phakathi kwesiciko kunye ne-puck. Kulumkele ukukhulula izikrufu ngompu ojijwayo. Gqibezela ukuqinisa ngesandla.
2. Fumana umthi, iposti, okanye enye into ngqo ecaleni kwendlela.
3. Qinisekisa ukuba into AYI-IMHAMKI okanye ii-alam zobuxoki ziya kwenzeka.
4. Sebenzisa imingxuma kwiithebhu ezisezantsi ukujija ipuck kwinto.

EMHLABENI (jonga umfanekiso ezantsi ekhohlo)

1. Xa uluhlu luvavanyiwe (jonga #6 ngasentla), isiciko sesitulo ngokukhuselekileyo kwipukhi enezikrufu ezinikiweyo. Kufuneka kungabikho msantsa phakathi kwesiciko kunye ne-puck. Kulumkele ukukhulula izikrufu ngompu ojijwayo. Gqibezela ukuqinisa ngesandla.
2. Fumana indawo ngqo ecaleni kwendlela.
3. Yomba umngxuma omkhulu ngokwaneleyo ukuba wenze iipukhi kunye nezikrufu ze-auger, uvumele isiciko se-puck silingane nomphezulu wobumdaka.
4. Khusela i-puck emhlabeni kunye nezikrufu ze-auger, iithebhu ezingaphantsi kwe-puck.
   Ukuba uyasilela ekukhuseleni i-puck, oomatshini bokucheba ingca, njl.njl. bayakuyitsala/bayifunxe.
5. Pakisha kunye tamp ubumdaka obujikeleze i-puck, ukuqinisekisa ukuba isiciko sicocekile kubumdaka kunye nabo bonke ubumdaka.

KUFAKELO LOKUPHUMA MAHHALA, UKUBA IZILWANYANA OKANYE ABANTU BANYATHELE KWI-SENSOR PUCK EFAKIWE EMHLABENI, IYAKUQHUBEKA IISANGO LIVULELWE. ICINGA UKUFAKA EPOSILE OKANYE KWIDRIVEWAY NDAWO.

KWIINDLELA YOKUQHUBA (jonga umfanekiso ezantsi ekhohlo)

1. Xa uluhlu luvavanyiwe (jonga #6 ngasentla), isiciko sesitulo ngokukhuselekileyo kwipukhi enezikrufu ezinikiweyo. Kufuneka kungabikho msantsa phakathi kwesiciko kunye ne-puck. Kulumkele ukukhulula izikrufu ngompu ojijwayo. Gqibezela ukuqinisa ngesandla.
   Phawula: Ukuba ukufutshane netrafikhi, cinga ngokuthoba ubuntununtunu (bona #7 ngasentla)
2. Sebenzisa i-4.5 ″ yesarha yomngxunya we-masonry ubukhulu ukubhoboza umngxuma wepukhi. Bore ubuncinci i-2.75” ubunzulu ukuze isiciko se-puck sibe yi-1/4″ ngaphantsi kwendlela yokuqhuba (ngoko ayinakutsalwa ngamakhuba ekhephu, iigratha, njl. njl.).
3. Galela i-loop sealant emngxunyeni, qaphela ukuba ungazalisi kakhulu, kwaye ubeke i-puck emngxunyeni.
4. Bamba i-puck phantsi kunye nobunzima de i-sealant iqine.
5. MUSA ukugalela i-sealant phezu kwesiciko se-puck okanye abaphathi ukuze ufumane ukufikelela kwiibhetri.

IZITSHINTSHI ZOKUDIPSHA ISIHLANGANISI

Iiswitshi zeDiphu zokulawula isandi kunye nemowudi yokuphinda kwi-Integrator.

EMZANTSI
Vula iswitshi yediphu 1 ukuze uvule isandisi-lizwi.
Isandi siya kubeep 3 amaxesha xa isithuthi sibhaqwe. Iza “kuntyiloza” kwakhona xa iibhetri ze-sensor puck zisezantsi kwaye zifuna ukutshintshwa.

IMODE YOKUPHINDA
Vula iswitshi yediphu 2 ukuze ujike isihlanganisi sibe sisiphindaphindo. Kwimowudi yokuphinda, iyunithi iya kuhlala ifumana kwaye iphinda nayiphi na imiqondiso ukusuka kwinzwa ukuya kwi-Integrator efakwe ekhaya (bona #11 ngezantsi). I-LED ebomvu nebhlowu iya kuthi ngokutshintshanayo kwaye iqhubeke iqhwanyaza kwimodi yokuphinda.

UKUFAKA ISIHLANGANISI

Inkqubo yakho idibanisa ngokungenamthungo nalo naluphi na ukhuseleko/inkqubo yeHA okanye umqhubi wesango lombane. Ukudibanisa, sebenzisa ezi schematics zocingo zilandelayo njengezikhokelo:

UKHUSELEKO / INKQUBO EZENZAKALELAYO YASEKHAYA

Umhlanganisi usebenzisa i-8-24 VAC okanye i-8-30 VDC. Sebenzisa inkqubo yokhuseleko/HA okanye umqhubi wesango ukwenza amandla okanye usebenzise nayiphi na i-12VDC unikezelo lwamandla. ICartell ithengisa unikezelo lwamandla olukhethiweyo (Icandelo #CW-PS).

KUFUNEKA WENGEZELE UKHUSELEKO ESANGO XA USEBENZISA I-CW-SYS UKUPHUMA KWAMAHHALA.

ABASEBENZI BESANGO NGOKUZENZAKALELAYO

Iterminal yokuphuma kabini

UKUPHUMA OKUNYE

IMODE YOKUPHINDA

Ukwandisa uluhlu lwerediyo, kunokuba yimfuneko ukwenza i-Integrator iphindaphinda.
Ukuba isignali evela kwi-sensor puck ayifikeleli kwi-Intergrator:

1. Hambisa isivamvo kufutshane neSihlanganisi, kunye/okanye
2. Faka into ephindayo kwikhaya phakathi kwe-sensor puck kunye ne-Integrator eqhagamshelwe kukhuseleko/inkqubo yokuzenzekela ekhaya. Yenza oku kulandelayo:
3. Thenga i-Integrator ekhethiweyo kunye nonikezelo lwamandla (Imveliso CW-REP).
4. Susa isiciko esivalekileyo ngokutyhala ngononophelo iithebhu ezisecaleni ngaphakathi.
5. Qhagamshela unikezelo lwamandla kwiitheminali 1 & 2 (akukho polarity).
6. Vula iswitshi yediphu 2 (jonga #9 ngasentla). Oku kubeka iyunithi kwimo yokuphinda. Ii-LED ezibomvu nezibhlowu ziya kuqhwanyaza ngokutshintshanayo ukubonisa indlela yokuphinda. Iya kuhlala ifumana yonke imiqondiso evela kwinzwa kwaye idlulisele (yiphinda) kwi-Integrator efakwe ecaleni kwenkqubo ephambili.
7. Faka i-repeader kwifestile ekufutshane ne-sensor puck.
8. Cima idiphu switch 1 ukucima isandisi-lizwi.

PHAWULA: Ukuodola ikiti yokuphinda, sebenzisa ikhowudi yemveliso CW-REP.

IiNgcaciso zobuGcisa

Ezobugcisa Iinkcukacha
	Isivamvo “Ipakhi”	Umdibanisi
Amandla Kufuneka	2 – CR123A iibhetri (6 V)	8-24VAC; 8-28VDC
Yima ecaleni kuka Okwangoku	22 Microamps (μA)	25 Miliamps (mA)
Ialarm Okwangoku	130 Miliamps (mA)	40-80 Milliamps (mA)
Udluliselo Ixesha	–	Imizuzwana engama-2
Udluliselo Abafowunelwa	–	SPDT, NO okanye NC (Form C)
Udluliselo Qhagamshelana Ukukala	–	2 amp/ 24 VDC (1 mA kwi-5 VDC min. umthwalo)
Unomathotholo Uluhlu	Ivavanywe ngaphezulu komhlaba, akukho zithintelo, ukuya kuthi ga kwi-2,500 ft.* Kuvavanywe ukugungxulwa komhlaba, akukho zithintelo, ukuya kuthi ga kwi-1,000 ft.* Sebenzisa iRepeater ekhethiweyo (CW-REP) ukwandisa uluhlu lwerediyo
Ibhetri Ubomi	1-3 iminyaka*	–
Indawo ebiyelweyo Ukukala	IP68	–
Amandla Ukukala	I-9.39 yetoni-force (8514 kgf)	–
Ubushushu Uluhlu	-25° F. – +140° F.(-32° C. – 60° C.)
Imilinganiselo	4.5“ idaya. x 2.5“ H(11.43 cm x 6.35 cm)	3.25” L x 2” H x .875” D(8.25 cm x 5.08 cm x 2.22 cm)
Ubunzima	2 lbs. (.90kg)	1 lb. (.45kg)

* Qikelela kuphela. Uluhlu lwerediyo kunye nobomi bebhetri buxhomekeke kwizinto ezininzi eziguquguqukayo. Akukho ziqinisekiso.

ISILUMKISO: Le mveliso inokukuvezela kwiikhemikhali ezibandakanya i-Acrylonitrile, eyaziwayo kwiState of California ukuba ibangele umhlaza. Ngolwazi oluthe vetshe, yiya ku www.P65Zilumkiso.ca.gov.

UKUKHETHA Isango LANGAPHANDLE I-ENTENNA

Kufakelo lwabaqhubi besango, i-eriyali encanyathiselwe ngokuthe ngqo kwi-Integrator iya kusebenza kwiimeko ezininzi. Ekuphela kwexesha apho inokungasebenzi kumatshini wesango lentsimbi elitywiniweyo elivalela umqondiso weRF. Ukuba kunjalo, sebenzisa intambo ye-coaxial efakiweyo kwaye ufake i-eriyali ngaphandle, ngokulandelayo:

1. Gqoka umngxuma oyi-1/4” kumsebenzisi wesango.
2. Beka isiphelo sesifazana sentambo emngxunyeni kwaye usebenzise i-nut ukuncamathela kumqhubi. Qinisekisa ukuba i-gasket yerabha ihlala ngaphandle phakathi komsebenzi kunye newasha.
3. Khupha i-eriyali ekupheleni kwendoda yentambo yangaphandle yomsebenzisi.
4. Khiya isiphelo sendoda kwisiphelo sentambo ukuya kwisihlanganisi se-eriyali eHlanganisiweyo.
   

UKUBUYISWA KWEENTENGISO

UMTHENGI: Qhagamshelana nesifakeli sakho.

FAKA: UFOWELE PHAMBI KOKWEMBA OKANYE UKUKHIPHA

Fowuna 800-878-7829, ukhetho 1 ukulungisa ingxaki kwaye ufumane iBuyisela iMvume yeMpahla (RMA) inombolo. Bhala inombolo ye-RMA kwibhokisi yokuthumela kunye nayo nayiphi na imbalelwano ebandakanyiweyo nemveliso eneziphene.

ISILUMKISO: MUSA UKUTHUMELA IEBHETRI XA UBUYISELA IMVELISO KWICARTELL.

IWARANTI YEMINYAKA EMIHLANU

Zonke iimveliso zeCartell ziqinisekisiwe ngokuchasene neziphene kwizinto eziphathekayo kunye nokusebenza iminyaka emihlanu. Esi siqinisekiso asizigqumeli iziphene ezibangelwa, kodwa asiphelelanga koku:
izenzo zikaThixo, ukufakwa okungafanelekanga, ukuxhatshazwa, umonakalo womlilo, ukuqhutyelwa kombane, ukusilela kwenkqubo edibeneyo, isivalo esingafanelekanga / i-gasket / ufakelo lwebhetri, i-screws yokuqinisa ngokugqithiseleyo, kunye ne-scrupping screw holes.

Isilumkiso seFCC

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Ukusebenza kuxhomekeke kwezi meko zimbini zilandelayo: (1) esi sixhobo asinakubanga luphazamiseko luyingozi, kwaye (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela usetyenziso olungafunekiyo. Naluphi na utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo.
PHAWULA: Esi sixhobo sivavanyiwe saza safunyanwa sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana neCandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile.
Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo ye-thr receiver.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Ukugcina ukuthobela izikhokelo zeFCC's RF Exposure, Esi sixhobo kufuneka sifakwe kwaye sisebenze ngomgama ophakathi kwe-20cm yeradiyetha umzimba wakho: Sebenzisa kuphela i-eriyali oyinikiweyo.

Isilumkiso se-IC (eCanada): Esi sixhobo sithobela i(s) umgangatho we-RSS we-Industry Canada-exemppt. Ukusebenza kuxhomekeke kule miqathango mibini ilandelayo: (1) esi sixhobo asinakubanga ukuphazamiseka; (2) esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza ngokungeyomfuneko kweso sixhobo.

isixhobo sakhe sivavanyiwe kwiimfuno zokuvezwa kweRF kwisixhobo esiphathwayo. Isixhobo sigcinwa ubuncinci be-5 mm kude nomzimba womsebenzisi.

Isazisi seFCC #: 2AUXCCWIN & 2AUXCCWSN (US)
NDIYABONA#: 25651-CWIN & 25651-CWSN (Canada)

E3957 AUSTRALIA

IINKCUKACHA ZOQHAKAMSHELWANO

IINKCUKACHA ZOQHAKAMSHELWANO
INKXASO YOBUGCISA/ii-RMA	800-878-7829
UKUHAMBISA NGENQANAWE	800-878-7829
UKUNIKA INGXELO	800-878-7829
UKUTHENGISWA NGAPHAKATHI	800-878-7829
EMAIL	Ukuthengisa@ApolloGateOpeners.com
Idilesi	8500 Hadden Road Twinsburg, OH 44087
WEBI-SITE	www.ApolloGateOpeners.com

www.LinearGateOpeners.com
800-878-7829
Ukuthengisa@LinearGateOpeners.com

Amaxwebhu / Izibonelelo

Izivuleli zeSango ze-CW-SYS ezingenazingcingo zokuPhuma ngoSensitivity [pdf] Incwadi Yomyalelo I-CW-SYS yokuPhuma ngokungenaMcingo kwiSensor enovakalelo, CW-SYS, iSensor yokuPhuma ngaphandle kwamacingo ngoLungiso loBuvakalelo, iSensitivity Adjustment, kunye noLungiso lovakalelo, uhlengahlengiso lovakalelo.

Iimbekiselo

• Incwadi yokusebenzisa