LENNOX M4 IYunithi engundoqo yoMyalelo yoLawulo lweNcwadana

©2023 Lennox Industries Inc.
Dallas, eTexas, eU.SA

UMLAWULI WEYUNITHI YE-LENNOX® CORE (M4) 

ULAWULO
508268-01 09/2023
Ithathe indawo nge-01/2022

IMIYALELO YOFAKELO YE-CORRE UNIT ULAWULI (M4) UHLAZIYO LWEFIRMWARE

KUBALULEKILEYO

Ufakelo olungafanelekanga, ukulungiswa, ukuguqulwa, inkonzo okanye ukulungiswa kunokubangela ukwenzakala komntu, ukulahlekelwa bubomi, okanye umonakalo kwipropathi.

Ufakelo kunye nenkonzo kufuneka yenziwe ngumfaki oqeqeshiweyo onelayisenisi (okanye ukulingana) okanye i-arhente yenkonzo.

Ngaphezuluview

Uhlaziyo lweFirmware luyafumaneka kusetyenziswa iM4 Unit Controller USB port. Sebenzisa ezi nkqubo zilandelayo ukuhlaziya i-firmware ye-M4 Unit controller.

UKUQINISEKISA INKQUBO YAM4 YEYUNITHI YOLAWULO YEFIRMWARE

1. Qalisa iLennox CORE Service App kwaye udibanise isixhobo sakho esiphathwayo kwiLennox CORE Control System.
2. Khangela uye ku IMENU > RTU MENU > DATA > FACTORY> SOFTWARE VERSION. Inguqulelo ye-firmware yangoku idweliswe phezulu kwesikrini.
   
3. Skena iKhowudi yeQR okanye undwendwele https://www.lennoxcommercial.com/Resources/Software/ ukufumana inguqulelo ye-firmware yamva nje.
   Inguqulo ye-firmware esebenzayo KUFUNEKA Tshatisa inguqulelo eposwe kwisiza.
4. Landela imiyalelo yokufakela ukuhlaziya uguqulelo lwe-firmware (ukuba kuyimfuneko).

Ukulungiselela i-USB Flash Drive

• Imidiya ye-USB flash drive kufuneka ifomathwe kusetyenziswa iFAT32 file inkqubo
• I-USB flash drive enobuninzi obungama-32GB umthamo uyacetyiswa

FILEKUDINGEKA UHLAZIYO

File efunekayo ukuhlaziya isilawuli seyunithi ye-M4 ukusuka kwi-USB fl ash drive: COREXXXXXXXXX.C1F

PHAWULA: Cebisa ngoonobumba abakhulu, kodwa hayi isinyanzelo.
PHAWULA: I-xxxxxxx ngababambi bendawo kwiinguqulelo ezinkulu nezincinci kwaye bakha ulwazi lwenombolo kwigama lokwenyani lefayile, kwaye iyahluka ukusuka kwinguqulelo enye ukuya kolandelayo.

UKWENZA IFOlder

1. Yenza ifolda kwingcambu ye-USB fl ash drive ebizwa ngokuba yi "Firmware".
2. Yenza ifolda ephantsi phantsi kwe "Firmware" ifolda ebizwa ngokuba yi "M4".
3. Beka ikopi ye- COREXXXXXXXX.C1F file kwisiqulathi seefayili esibhalwe “M4”.

Ukuhlaziya iFirmware

1. Faka i-USB flash drive kwi-CORE Unit Controller USB port.
2. Sebenzisa i-app yeNkonzo ye-CORE ukuhlaziya i-firmware. Yiya kwi-MENU> I-RTU MENU> INKONZO> UHLAZIYO lweFIRMWARE kwaye ukhethe uPhuculo kwi-USB ukhetho.
   
   
   Inguqulelo ye-firmware kwi-USB fl ash drive ibonisa.
3. Khetha i-firmware ehlaziyiweyo kwaye ucinezele Faka.
   
   PHAWULA: Uphuculo lwe-firmware luya kuthatha i-10 ukuya kwi-15 imizuzu.
   Isikrini esilandelayo sibonisa isimo sohlaziyo lwe-firmware.
   
   Isikrini sokuqinisekisa siyaboniswa, emva kokuba uhlaziyo lugqityiwe. Inkqubo iya kuqalisa kwakhona.
4. Phinda amanyathelo 1 kunye ne-2 ukuqinisekisa ukuba i-firmware ihlaziywe emva kokuba umlawuli weyunithi eqalise ngokutsha kwaye i-app ye-CORE yeNkonzo iphinde yaxhunywa.

PHAWULA: Ulwazi lweFirmware lukwadweliswe kumboniso wamacandelo asixhenxe omlawuli weyunithi ngexesha lokuqalisa. I-firmware idweliswe ngolu hlobo lulandelayo:

• Enkulu
• Mncinci
• Yakha

PHAWULA: Uhlaziyo lweFirmware alulutshintshi useto lwesilawuli seyunithi. Zonke iisetingi ziya kugcinwa emva kokuba i-firmware ihlaziywe.

Ukugcina kunye nokuLayisha iNkqubo yeProfile

UKUGCINA INKQUBO YEPROFILE

Oku kusebenza kugcina "iprofile” kwisilawuli. Oko kuthetha ukuthini ukuba Ibeka indawo yokubuyisela kwisilawuli umlawuli anokubuyiselwa kuye kwimeko apho umlawuli ulungelelanise ngokungalunganga, ulahlekelwa ulungelelwaniso, njl.file yenziwe kwiparameters esele zigciniwe kumlawuli.

Ngenxa yoko, akukho mfuneko yokuba umthombo a file ukusuka kwi-USB, i-app yeselula, njl. Endaweni yoko, umsebenzisi ucofa nje ukugcina, kwaye umlawuli ugcina iiparitha ezifanelekileyo ngaphakathi.

1. Faka isixhobo esihambelanayo sogcino lwe-USB.
2. Kwinkonzo yenkonzo ye-CORE, yiya ku RTU MENU > INGXELO kwaye ukhethe INKQUBO YEPROFILE.
3. Chwetheza igama elikhethekileyo leprofile kwi IPROFILE NAME intsimi
4. Khetha GCINGA ngaphantsi nokuba I-MOBILE or i-USB kuxhomekeke kwisixhobo ongathanda ukusisebenzisa.
   If I-MOBILE ikhethiwe, isixhobo sakho siya kukukhuthaza ukuba ukhethe indawo.

PHAWULA: Ukuba i-CORE Service App ibonisa ukuba umlawuli weyunithi akakwazanga ukufunda isixhobo sokugcina i-USB, susa kwaye uphinde ufake isixhobo sogcino lwe-USB kwaye uzame ukugcina ipro.file kwakhona.

UKUlayishwa kweNKQUBO PROFILE

1. Faka isixhobo sogcino se-USB esineNkqubo yangoku egciniweyo yeprofile, okanye uqhubeke ukuba unomsebenzi wenkqubofile igcinwe kwisixhobo sakho esiphathwayo.
2. Yiya e INKONZO > INGXELO.
3. Khetha layisha phantsi kweselfowuni okanye i-USB, kuxhomekeke apho inkqubo yakho profile ugciniwe.
   PHAWULA: I-app ye-CORE yeNkonzo ingabonisa nokuba umlawuli weyunithi akakwazanga ukufunda isixhobo sokugcina i-USB okanye silahlekile. Susa kwaye uphinde ufake isixhobo sogcino lwe-USB kwaye uzame ukulayisha iNkqubo yeProfile kwakhona. Ukuba umcimbi uyaqhubeka, yonke idatha kuya kufuneka ifakwe ngesandla. 
4. Khetha iNkqubo efunekayo yeProfile ngokusebenzisa i-app yenkonzo ye-CORE. Ukuba ulayisha inkqubo yeprofile ukusuka kwi-USB, khetha OKULANDELAYO ukuqhubeka. Ukuba inkqubo igqitywe ngempumelelo, usetyenziso luya kubonisa “iSystem Profile Ilayishiwe.”

Amaxwebhu / Izibonelelo

Umlawuli weYunithi ye-LENNOX M4 [pdf] Incwadi Yomyalelo I-M4 Core Unit Controller, i-M4, i-Core Unit Controller, i-Unit Controller, uMlawuli

Iimbekiselo

• Incwadi yokusebenzisa