ECU&TCU Programmer
Incwadi yokusebenzisa
I-X-43 ECU kunye ne-TCU Programmer
Phawula: Imifanekiso eboniswe apha yenzelwe injongo yokukhangela kuphela. Ngenxa yokuphuculwa okuqhubekayo, iimveliso zokwenyani zinokwahluka kancinci kwimveliso echazwe apha kwaye le nto ingatshintsha ngaphandle kwesaziso.
| Uluhlu lokupakisha | |||
| Icandelo eliphambili |  |
IAptha ehambelanayo A (5Pcs) |  |
| Intambo ye-USB (Uhlobo B) |  |
I-Adapter ehambelanayo B( 6Pcs) |  |
| Intambo ye-USB (Uhlobo B) |  |
IAptha ehambelanayo C (7Pcs) |  |
| Intambo yeMowudi yebhentshi |  |
IAptha ehambelanayo D (8Pcs) |  |
| Ukuguqula Amandla Amandla |  |
I-Adapter E ehambelanayo (6Pcs) |  |
| Imvulophu yephasiwedi |  |
Uluhlu lokupakisha |  |
| Ulwakhiwo | |
 |
|
| 1 | DB26 Ujongano |
| 2 | DB26 Ujongano |
| 3 | Umbane oNikezela ngombane |
| 4 | Uhlobo lwe-USB B |
| 5 | Isalathi Samandla (Isibane esiBomvu silayita emva kokukhanya kombane) |
| 6 | Isalathisi seSizwe (Isibane esiluhlaza siyadanyaza emva kombane) |
| 7 | I-ERROR Isalathisi (Isibane esiluhlaza okwesibhakabhaka xa uphucula okanye ungaqhelekanga) |
Inkqubo yokuSebenza
Khuphela kwaye ufake isoftware
Khuphela iphakheji yofakelo lwesoftware ngokulandelayo webindawo kwaye uyifake kwikhompyuter.
Qhagamshela umdwelisi wenkqubo weECU&TCU kunye nekhompyuter
Njengoko kubonisiwe kulo mfanekiso ungezantsi, sebenzisa intambo ye-USB (uhlobo A ukuchwetheza B) ukuqhagamshela i-ECU&TCU umdwelisi weprogram kunye nekhompyutha.
Ukuqaliswa
Xa isetyenziswe okokuqala, iya kungena kwi-interface yokuvula. Emva kokudibanisa umdwelisi wenkqubo weECU&TCU, inkqubo iyakuqaphela ngokuzenzekelayo iNombolo yothotho. Thatha imvulophu yephasiwedi kwaye ukhuhle indawo yokwambathisa ukuze ufumane ikhowudi yokuqalisa.
Idatha ye-ECU Funda kwaye Ubhale
4.1 Fumana Ulwazi oluNxulumene ne-ECU
4.1.1 Njengoko kubonisiwe kumzobo ongezantsi, cofa i-Brand->Model->Engine->ECU ukukhetha uhlobo lwe-ECU oluhambelanayo.
Ungaphinda ufake ulwazi olufanelekileyo (i-Brand, i-ID ye-Bosch okanye i-ECU) kwibhokisi yokukhangela ukuze ubuze. Umzekeloample, khangela injini ye-MED17.1 nge-ECU njengoko kubonisiwe kulo mfanekiso ungezantsi.
4.1.2 Klikha uQhagamshelwano oluNgqo kuMzobo ukuze ufumane idayagram yeentambo ze-ECU.
4.1.3 Ngokubhekiselele kumzobo wocingo, sebenzisa intambo yemowudi ye-BENCH kunye nentambo ye-adapter ehambelanayo ukuqhagamshela i-ECU kunye ne-ECU & TCU umprogram.
4.1.4 Emva kokugqiba uqhagamshelo, klikha ku-Read Chip ID ukufunda idatha.
4.2 UkuFunda nokuBhala ngeDatha
4.2.1 Cofa i-Read EEPROM Data ukuze wenze i-backup yedatha ye-EEPROM kwaye uyigcine
4.2.2 Cofa i-Read Flash Data ukugcina idatha ye-FLASH kwaye uyigcine.
4.2.3 Klikha ku- Bhala i-EEPROM Data kwaye ukhethe i-backup ehambelana nayo file ukubuyisela idatha ye-EEPROM.
4.2.4 Cofa uBhala iFlash Data kwaye ukhethe i-backup ehambelana nayo file ukubuyisela idata FLASH.
Ukwenziwa Kweenkcukacha
5.1 Ukuvalwa kwe-Immobilizer kunye File Phuma
5.1.1 Cofa i-Data Processing kwi-interface engundoqo.
5.1.2 Khetha Ukuvalwa kwe-Immobilizer kunye file phuma kwifestile ye popup.
5.1.3 Klikha i-EEPROM immobilizer/FLASH immobilizer, layisha i-EEPROM/FLASH ehambelanayo yogcino file njengeengcebiso zesoftware.
5.1.4 Isistim iya kufumana idatha engqinelana nayo kwikhompyutha, ize emva koko igcine entsha file ukugqiba ukuvala i-immobilizer.
5.1.5 Cofa i-EEPROM checkout/FLASH checkout, layisha i-EEPROM/FLASH ehambelana nayo. file njengeengcebiso zesoftware.
5.1.6 Isistim iya kufumana idatha engqinelana nayo kwikhompyutha, ize emva koko igcine entsha file ukugqiba i file phuma.
5.2 Ukwenziwa kweenkcukacha zolwazi
Phawula: Ngaphambi kokwenza i-cloning yedatha, kuyimfuneko ukugcina i-backup kwaye ugcine idatha ye-FLASH & EEPROM ye-ECU yokuqala kunye ne-ECU yangaphandle. Ngamanyathelo okusebenza athile, nceda ujonge kwisahluko esingaphambili.
Lo msebenzi usetyenziswa ikakhulu kwi-injini ye-ECU data cloning ye-VW, i-Audand Porsche, ezinye iimodeli zinokugqiba ukudibanisa idatha ngokufunda ngokuthe ngqo nokubhala idatha.
5.2.1 Funda kwaye ugcine idatha ye-FLASH & EEPROM ye-ECU yesithuthi sokuqala kunye ne-ECU yangaphandle.
5.2.2 Cofa i-Data Processing kwi-interface engundoqo, kwaye ukhethe i-Data Cloning kwi-pop-up window ukufaka ujongano olulandelayo. 
5.2.3 Khetha imodeli yemoto ehambelanayo yokwenziwa kwedatha.
Landela imiyalelo yesoftware yokulayisha i-FLASH & EEPROM idatha ye-ECU yesithuthi sokuqala ngokulandelelanayo. 
5.2.4 Landela imiyalelo yesoftware yokulayisha i-FLASH & EEPROM data ye-ECU yangaphandle ngokulandelelanayo.
5.2.5 Inkqubo ihlalutya idatha yokulwa nobusela kwaye ivelise idatha ye-clone file, cofa Qinisekisa ukuyigcina.
5.2.6 Qhagamshela i-ECU yangaphandle kunye ne-ECU&TCU Programmer, bhala idatha ye-FLASH ye-ECU yoqobo kwaye ugcine idatha ye-clone ye-EEPROM kwi-ECU yangaphandle.
Amaxwebhu / Izibonelelo
 |
YENZA i-X-43 ECU kunye ne-TCU Programmer [pdf] Incwadi yokusebenzisa X-43, X-43 ECU kunye ne-TCU Programmer, ECU kunye ne-TCU Programmer, i-TCU Programmer, uMcwangcisi |