Lambda CS-3000 Series Curve Tracer
Iinkcukacha
- Model: Curve Tracer CS-3000 series (CS-3100, CS-3200, CS-3300)
- Collector Supply (HV Mode): Max.Peak voltage – 3 kV, Max. Peak current – 15 A, Max. peak power – 390 W
- Collector Supply (HC Mode): Max.PPeakvoltage – 30 V, Max. peak current – 7.5 A, Pulse width – 50 us to 400 us
- Step Generator: Step rate – 1/10 Step, Pulse width range – 50 us to 400 us
- Umlinganiselo: Umqokeleli voltage range – HV: 50 mV/div to 500 V/div, HC: 50 mV/div to 5 V/div
Imiyalelo yokusetyenziswa kwemveliso
Ubonelelo loMqokeleli
For HV mode, set the max. Peak voltage and current according to the specifications. For HC mode, adjust the settings as needed.
Inyathelo Generator
Set the step rate and pulse width within the specified ranges for accurate measurements.
Umlinganiselo
Sebenzisa umqokeleli ofanelekileyo voltage range based on the mode of operation for precise readings.
Ideal for measuring the characteristics of various semiconductors such as IGBTs, MOSFETs, transistors, and diodes etc.
- Ubuninzi bencopho yomthamotage 3,000V (high voltagindlela e)
- Maximum peak current 1,000A (CS-3300 high current mode)
- All models equipped with LEAKAGE mode (1pA cursor resolution)
- USB port to save screen data and setup data
- Equipped with La LAN interface for remote control
Easy-to-understand measurement screen
CS-3000 Series Specifications
Collector supply HV mode
| Umzekelo | CS-3100-300V * 2 | CS-3100 / CS-3200 / CS-3300 | |||
|---|---|---|---|---|---|
| Imowudi/ipolarity | Full wave rectification/ + – , DC/ + – , LEAKAGE/ + – , AC | ||||
| Ubuninzi bencopho yomthamotage | 300V | 30V | 3kV | 300V | 30V |
| Ubuninzi bencopho yangoku (maximum peak pulse current * 1 ) |
750mA (1.5A * 1 ) |
7.5A (15A * 1 ) |
75mA (150mA * 1 ) |
750mA (1.5A * 1 ) |
7.5A (15A * 1 ) |
| Amandla aphezulu aphezulu | 120mW / 1.2W / 120W / 390W (Cannot be set when using the maximum peak voltage of 3kV) | ||||
| Horizontal axis range | 50mV～500V/div | ||||
- The maximum instantaneous current value that can be generated (varies depending on the target to be measured and conditions), the measurement should be less than or equal to the maximum peak current value.
Collector supply HC mode
| Umzekelo | CS-3100 / CS-3100-300V * 2 | CS-3200 | CS-3300 | |||
|---|---|---|---|---|---|---|
| Imowudi/ipolarity | Not equipped with HC mode | Pulse/ + – | ||||
| Ubuninzi bencopho yomthamotage | 40V | |||||
| Ubuninzi bencopho yangoku | 400A | 40A | 1,000A | 400A | 40A | |
| Amandla aphezulu aphezulu | 4kW | 400W | 10kW | 4kW | 400W | |
| Ububanzi be-Pulse | Pulse width is variable at 50µs to 400µs (10µs resolution) | |||||
| Indawo yokulinganisa | The measurement point can be specified (10µs resolution) | |||||
| Vertical axis range | 100mA～50A/div | 100mA～100A/div | ||||
| Uvavanyo | CS-301 | CS-302 | ||||
Iinkcazo eziqhelekileyo
| Loop correction | Hardware | Correction ofthe floating capacitance between the collector supply and the ground | |
| Isoftware | Pseudo-looping through software optimisation | ||
| Inyathelo generator | Offset | Ukuseta uluhlu | -10 ～ +10 x STEP AMPLITUDE Setting |
| Isigqibo | 1% of the STEP AMPLITUDE setting | ||
| Imowudi yangoku | Uluhlu | 50nA to 200mA per step, 21 steps, 1-2-5 switching | |
| Ubuninzi bangoku | 2A | ||
| Ubuninzi bomthamotage | 10V okanye ngaphezulu | ||
| UmqulutagImo | Uluhlu | 50mV to 2V per step, 6 steps, 1-2-5 switching | |
| Ubuninzi bangoku | 500mA～(～8V), 200mA～(～15V), 10mA～(～40V) | ||
| Ubuninzi bomthamotage | ±40V | ||
| Inqanaba lenyathelo | 2x 50Hz or 60Hz (1x in AC mode), pulse interval in HC mode | ||
| Inyathelo lokubetha | Ububanzi be-Pulse | 50µs～400µs (10µs step) When in HC mode, the pulse width is 100µs wide before and after the pulse of the collector supply |
|
| Inani lamanyathelo | 0～20 Step | ||
| Iziphumo zeAUX | Uluhlu | OFF, -40V～+40V (Variable in 100mV steps) | |
| Imo yokulinganisa | PHINDA, YIMISE/KUNYE, TSHAYELA | ||
| I-axis ethe nkqo (full scale 10div) |
Umqokeleli wangoku | Uluhlu | HV mode：1µA/div to 2A/div, 20 steps 1-2-5 switching (HC mode is not included) |
| Ukuchaneka | 2% + 0.05 x VERT/div of readout To this, add the loop correction error for the following maximum peak voltages 0.5µA(30V), 1µA(300V), 6µA(3kV), 12µA(5kV) Specify at least 10% of the maximum peak voltage for 30V, 300V, and 3kV, and at least 30% for 5kV |
||
| Emitter yangoku (LEAKAGE) |
Uluhlu | 1nA/div～2mA/div, 20 step 1-2-5 switching (Collector supply mode is LEAKAGE) |
|
| Ukuchaneka | 2% + 0.05 x VERT/div + 1nA or less of readout | ||
| I-axis ethe tye (full scale 10div) |
Umqokeleli Umqulutage |
Uluhlu | HC mode：50mV/div to 5V/div, 7 steps 1-2-5 switching (HV mode is not included) |
| Ukuchaneka | 2% + 0.05 x HORIZ/div or less of readout | ||
| Base/ umthumeli Umqulutage |
Uluhlu | 50mV/div~5V/div, 7 step 1-2-5 switching | |
| Ukuchaneka | 2% + 0.05 x HORIZ/div or less of readout | ||
| Bonisa | Bonisa | 8.4-intshi TFT LCD | |
| Inani lamanqaku edatha | 1,000 points/trace (AC, full wave rectification) 20～1,000 points/trace (SWEEP mode) |
||
| Trace display | Point interpolation display, dot display | ||
| I-avareji | OFF, 2 to 255 times | ||
| Ukuzingisa | OFF, SHORT, LONG, Infinite length | ||
| Save internal waveform (REF) | Iphaneli ye-4 | ||
| Ikhesa | I-DOT | Vert, Horiz, β or gm | |
| FLINE | Vert, Horiz, 1/grad, intercept | ||
| SIMAHLA | Vert, Horiz, β or gm | ||
| Ifestile | Vert, Horiz, β or gm in the WINDOW area | ||
| Data save/read | Inkumbulo | Setup：256 pcs, REF：4 screens | |
| Inkumbulo yangaphandle | USB1.1：Setup, waveform, screen hardcopy (BMP, TIFF, PNG) | ||
| Ukude | Equipped with a remote 10BASE-T/100BASE-TX 1 port via LAN connection | ||
| Ukunikezwa Amandla | AC100～240V 50/60Hz, Maximum operating power：500VA (400W), Standby：50VA (7W) | ||
| External dimensions(mm) Ubunzima |
CS-3100 / CS-3100-300V * 2 | Approx. 424W x 220H x 555D (excluding protrusions and accessories) approx. 28kg (excluding accessories) |
|
| CS-3200, 3300 | Approx. 424W x 354H x 555D (excluding protrusions and accessories) approx. 43kg (excluding accessories) |
||
CS-3100-300V is a made-to-order product.
Izincedisi ezisemgangathweni
| CS-500 Iadaptha yovavanyo | |
|---|---|
 |
This is a jig for connecting the part to be measured, provided by the customer, and the fixture. (Standard accessories) |
Ii-FAQs
Umbuzo: Ndingenza ntoni ukuba ububanzi be-pulse buncinci kakhulu?
A: If the pulse width is narrow, adjust the settings to widen it within the allowable range to generate the max. peak voltage.
Umbuzo: Indlela yokulinganisa imveliso yokubonelela ngomqokeleli?
A: The collector supply output can be calibrated by enabling/disabling the output and adjusting the floating capacity as per the instructions provided.
Amaxwebhu / Izibonelelo
 |
Lambda CS-3000 Series Curve Tracer [pdf] Incwadi Yomyalelo CS-3100, CS-3200, CS-3300, CS-3000 Series Curve Tracer, iCurve Tracer, iTracer |