Iibhodi ze-HPO-6700 Series Output Override
Isikhokelo soFakelo

INTSHAYELELO

Kwiinketho eziphuculweyo zemveliso yomlawuli (ezifana nolawulo lwezandla, ukusebenzisa iireyidi ezinkulu, okanye kwizixhobo ezingenakunikwa amandla ngokuthe ngqo ukusuka kwimveliso eqhelekileyo), fakela iibhodi eziphumayo (kwizilawuli ezihambelanayo). Ezi ntlobo zilandelayo zeebhodi zokukhuphela ziyafumaneka:

• I-HPO-6702 iphucula i-analog voltage imveliso nge "Hand-Off-Auto" ulawulo ngelixa ubonelela potentiometer adjustable ukulungiselela useto override ngelixa "Hand" indawo.
• Iibhodi ze-HPO-6701/6703/6705 zenzelwe ukuguqula i-binary / i-digital output kwi-relay contact okanye i-triac output kunye nokubonelela ngolawulo lwe-"Hand-Off-Auto" kunye nemisebenzi yempendulo.
• I-HPO-6704 iguqula i-analog eqhelekileyo voltage imveliso kwi-4-20 mA imveliso ngelixa ibonelela nge-potentiometer ehlengahlengiswayo kwisethingi yokubhala ngaphezulu ngelixa ikwindawo "yesandla".
  PHAWULA: Ibhodi ye-HPO-6704 inika amandla kwaye ayiyi kusebenza ngesixhobo se-4-20 mA esinika amandla ayo.

Ibhodi yemveliso nganye inesalathiso esibomvu se-LED esivula xa ibhodi yokuphuma ivuliwe nokuba kungesandla okanye ngokuzenzekelayo.
Iibhodi zemveliso zinokufikeleleka kwindawo ezintathu zesilayidi zokutshintshela ukukhetha imisebenzi "ye-Hand-Off-Auto":

• Ngelixa kwi-H ("Isandla" okanye kwi-manual On) isikhundla, imveliso yenziwa amandla ngesandla, kwaye umlawuli unikwe isignali yempendulo ukubonisa ukuba imveliso ikhutshiwe.
• Ngelixa kwi-O (Off) indawo, imveliso ikhutshwe ngesandla, kwaye umlawuli unikezelwa ngomqondiso wempendulo ukubonisa ukuba imveliso ikhutshwe.
• Ngelixa kwi-A (Auto) indawo, imveliso iphantsi komyalelo womlawuli.
  PHAWULA: I-HPO-670x-1 isoloko ikwimowudi ye-auto kwaye ayinayo iswitshi yesilayidi semanuwali.
  PHAWULA: I-HPO-6701 triac kunye ne-HPO-6703/6705 i-relay circuits isebenzisa i-Switched Common SC terminal-kungekhona iGround Common GND terminal.
  PHAWULA: Iziphumo ze-HPO-6701 ze-triac zeze-24 VAC kuphela.
  PHAWULA: Kuphela i-HPO-6701 triac kunye ne-HPO-6704 4-20 mA iibhodi ezivunyiweyo kwizicelo zokulawula umsi. Ngolwazi lwesicelo sokulawula umsi, jonga iiNcwadi zokuLawula uMsi 000-035-08 (BACnet) kunye/okanye 000035-09 (KMDigital).
  ISILUMKO
  Ukudibanisa i-24 VAC okanye ezinye iimpawu ezidibanisa i-24 VAC okanye ezinye iimpawu ezidlula imilinganiselo yokusebenza yokugqithisa imilinganiselo yokusebenza yomlawuli phambi kokuba ibhodi yokukhupha ibhodi ibe ngumlawuli phambi kokuba ibhodi yokugqithisa ifakwe iya kulimaza umlawuli.
  efakiweyo iya konakalisa umlawuli.
  Ukufumana iinkcukacha zechungechunge lwe-HPO-6700, bona iphepha ledatha apha kmccontrols.com. Jonga amacandelo angezantsi ukuze ufakelwe kudidi oluthile lomlawuli.
• Kwi-KMC Conquest BAC-5900 abalawuli beechungechunge kunye ne-CAN-5901 iimodyuli zokwandisa, bona abalawuli abaLawulayo / iiModyuli kwiphepha lesi-2.
• Kubalawuli abadala abane-"top-mounting" yamatyala eplastiki aphakanyisiweyo (BAC-5801/5802 kunye ne-KMD5801/5802s entsha), jonga abalawuli beCase "Plastiki" abaDala kwiphepha lesi-3.
• Kubalawuli abadala abanesinyithi (umzekelo, i-BAC-5831, i-BAC-A1616BC) kunye namatyala eplastiki "ama-side-mounting" amadala (amadala e-KMD-5801 / 5802s), jonga abalawuli beCase "Metal" abaDala kwiphepha lesi-4.

LOYISE ABALAWULI/IMODULI

Le miyalelo isebenza kwi-KMC Conquest BAC-5900 abalawuli bechungechunge kunye ne-CAN-5901 iimodyuli zokwandisa (kunye nesiciko esivulelekileyo).

1. Susa umbane ngokususa ibhloko yeterminal yamandla amnyama.
2. Tsala umphetho ophezulu webhodi (umnyama oguquguqukayo) ongaphezulu kwesigqubuthelo sebhodi uze ujike uvule isiciko.
3. Susa i-jumper kwi-slot apho ibhodi yokugqithisa iya kuba khona ifakiwe.PHAWULA: Nganye kwezisibhozo zokubeka indawo zokubeka iinqanawa ukusuka kwi-KMC enejumpi efakwe kwizikhonkwane ezibini ezikufutshane kwiibhloko zesiphelo sesiphumo. Susa i-jumper kuphela ukuba ibhodi engaphezulu iya kufakwa.
4. Qondisa ibhodi yokubhala ngaphezulu nge-HOA yokukhetha isilayidi iswitshi ukuya phezulu kwisilawuli.
5. Slayida ibhodi yokugqithisa kwi-slot apho i-jumper isusiwe.
6. Vala isiciko seplastiki.
7. Hambisa i-AOH yokukhetha ukutshintsha kwibhodi engaphezulu kwindawo efanelekileyo.
   QAPHELA: A = Iyazenzekela (indawo ephezulu).
   O = Vala (indawo ephakathi).
   H = Isandla/Vula (ezantsi indawo).PHAWULA: Ukufumana ulwazi oluthe kratya malunga neebhodi zokukhupha imveliso, bona isikhokelo sofakelo lweHPO-6700 Series.
8. Phinda aManyathelo 3 ukuya kwisi-7 kuzo zonke ezinye iibhodi ezifunwayo.
9. Xhuma isixhobo esiphumayo kwibhloko yetheminali eluhlaza (imveliso) ehambelanayo yebhodi ephumayo. (Bona iiNcingo ezikwiphepha 4.)

ABADALA "PLASTIC" CASE zilawuli

Le miyalelo isebenza kubalawuli abane "top mounting" yamatyala eplastiki aphakanyisiweyo (umz., BAC-5801/5802 kunye ne-KMD-5801/5802 entsha). Emva kokufakwa kweebhodi, ikhava ekhoyo iphinda ifakwe.
Ukufakela iibhodi ezingaphezulu kwe-HPO-6700:

1. Susa umbane ngokususa i-jumper yamandla okanye ibhloko yetheminali.
2. Susa isiciko ngokucinezela macala omabini ekhava kwaye uyiphakamise.
3. Susa i-jumper kwi-slot apho ibhodi yokugqithisa iya kufakwa.
   PHAWULA: Nganye kwi-slots yokugqithisa inqanawa ukusuka kwi-KMC ene-jumper efakwe kwizikhonkwane ezimbini ezikufutshane kwiibhloko ze-terminal yemveliso. Susa i-jumper kuphela ukuba ibhodi engaphezulu iya kufakwa.
4. Qondisa ibhodi yokubhala ngaphezulu nge-HOA yokukhetha isilayidi iswitshi ukuya phezulu kwisilawuli.
5. Slayida ibhodi yokugqithisa kwi-slot apho i-jumper isusiwe.
6. Cwangcisa iswitsha yokukhetha kwibhodi yokubhala kwiindawo efanelekileyo.
   PHAWULA: A = Iyazenzekela (indawo ephezulu).
   O = Vala (indawo ephakathi).
   H = Isandla / Phezulu (indawo esezantsi).
7. Phinda amanyathelo 3 ukuya ku-6 kuzo zonke iibhodi ezifunekayo.
8. Phinda ufake isiciko phezu kweebhodi.
9. Qhagamshela izixhobo zemveliso kwiziphumo zomlawuli. (Bona iiNcingo ezikwiphepha 4.)
10. Phinda ufake i-jumper yamandla esuswe kwi-Step1.

ABADALA "METAL" CASE zilawuli

Le miyalelo isebenza kubalawuli abanesinyithi (umz., BAC-5831, BAC-A1616BC) kunye namatyala eplastiki "asecaleni" amadala (umzekelo, i-KMD-5801/5802 endala). Emva kokufakwa kweebhodi, i-slot cover ekhoyo kufuneka itshintshwe ngebhodi ephakanyisiweyo ye-HPO-6802.
Ukufakela iibhodi ezingaphezulu kwe-HPO-6700:

1. Susa umbane ngokususa i-jumper yamandla okanye ibhloko yetheminali.
2. Susa isiciko esifanelekileyo sokuvala ngokuphakamisa icala lasekunene lesigqubuthelo (ngaphakathi kwesakhelo seplastiki) ngakuwe.
3. Susa i-jumper kwi-slot apho ibhodi yokugqithisa iya kuba khona ifakiwe.PHAWULA: Nganye kwi-slots yokugqithisa inqanawa ukusuka kwi-KMC ene-jumper efakwe kwizikhonkwane ezimbini ezikufutshane kwiibhloko ze-terminal yemveliso. Susa i-jumper kuphela ukuba ibhodi engaphezulu iya kufakwa.
4. Qondisa ibhodi yokubhala ngaphezulu nge-HOA yokukhetha isilayidi iswitshi ukuya kwiziphumo zomlawuli.
5. Slayida ibhodi yokugqithisa kwi-slot apho i-jumper isusiwe.
6. Hambisa i-AOH yokukhetha ukutshintsha kwibhodi engaphezulu kwindawo efanelekileyo.
   PHAWULA: H = Isandla/Vula.
   O = Valiwe.
   A = Iyazenzekela.
7. Phinda amanyathelo 3 ukuya ku-6 kuzo zonke iibhodi ezifunekayo.
8. Susa iindawo zokubeka iileyibhile eziyimfuneko kwindawo nganye yebhodi kwindawo ye-HPO-6802 yokukhupha ibhodi yokukhupha (ithengwe ngokwahlukileyo).
9. Cofa isigqubuthelo se-HPO-6802 phezu kweebhodi.
10. Qhagamshela izixhobo zemveliso kwiziphumo zomlawuli.
    (Bona iiNcingo ezikwiphepha 4.)
11. Phinda ufake i-jumper yamandla okanye ibhloko yetheminali esuswe kwiNyathelo loku-1.

I-Siplified Schematic ye-Standard Analog (GND) Iziphumo

INkqubo eLula yeNkqubo yokuThatyathwa kweBhodi yoNikezelo (SC).

Iibhodi ze-HPO-6703/6705 zoRelay (iiCoils eziLawulwa nguMlawuli weSekethe)
ISILUMKO
Ukuqhagamshela ii-volts ezingama-24 ze-AC okanye ezinye iisignali Ukuqhagamshela i-24 volts AC okanye ezinye iisignali ezidlula imilinganiselo yokusebenza edlula imilinganiselo yokusebenza yomlawuli kwimveliso phambi kokuba isilawuli siphume kwimveliso phambi kokuba i-jumper ephumayo isuswe iya kuyonakalisa i-jumper ephumayo. isusiwe iya konakalisa umlawuli. Susa i-jumper kwaye ufake isilawuli.
PHAWULA: Iitheminali zemveliso eziTshintshiweyo eziqhelekileyo (SC) azidityaniswanga kwaba balawuli bemodeli ngaphandle kokuba kufakwe ibhodi ephumayo efanelekileyo. Sebenzisa iTshintshiwe kuphela
Okuqhelekileyo endaweni yeGround kunye ne-HPO6701 triac kunye ne-HPO-6703/6705 relays. Sebenzisa i-terminal ye-SC kwibhanki yemveliso efanayo njenge-terminal yemveliso. Jonga iGrounds Versus Switched Commons kwiphepha lesi-6.
PHAWULA: Ibhodi ye-4-20 mA HPO-6704 inika amandla kwaye ayiyi kusebenza kunye nesixhobo se-4-20 mA esinika amandla ayo. Kwii-4–20 ma izicelo, jonga nakwi-4–20 mA Wiring yeSikhokelo seSicelo sesiLawuli.
PHAWULA: Ukuba ibhodi isusiwe kwi-slot, phinda ufake i-jumper (HPO-0063) (isuswe ngaphambili) kwizikhonkwane ezimbini ezikufutshane kwiziphumo. I-jumper yenza i-analog voltage imveliso kwiitheminali.
IZIQULATHO EZITSHINTSHIWEYO
I-Switched Common (SC) ii-terminal zokuphuma azixhunyiwe kumlawuli ngaphandle kokuba i-jumper isusiwe kwaye ibhodi yokukhupha i-relay / triac override efanelekileyo ifakiwe.
Sebenzisa kuphela i-SC endaweni yeGround kunye ne-HPO-6701 triac kunye ne-HPO-6703/6705 relays! Sebenzisa i-terminal ye-SC kwibhanki yemveliso efanayo (ibhloko ye-terminal yomntu ngamnye) njenge-terminal yayo yemveliso. Ii-terminals ezitshintshiweyo eziqhelekileyo zodwa kwimihlaba yesekethe esetyenziselwa i-universal output analog circuitry kubalawuli.
Kuba sampiintambo zombane kwizixhobo eziphumayo, bona i-Wiring kwiphepha lesi-4.

UKULONDOLOZA

Akukho lungiso lwesiqhelo olufunekayo. Icandelo ngalinye lenzelwe ukuthembeka, ukuthembeka kwexesha elide kunye nokusebenza. Ukufakela ngokucophelela kuya kuqinisekisa ukuthembeka kwexesha elide kunye nokusebenza.

IZAZISO EZIBALULEKILEYO

Izinto ezikolu xwebhu zenzelwe iinjongo zolwazi kuphela. Imixholo kunye nemveliso eyichazayo inokutshintsha ngaphandle kwesaziso.
KMC Controls, Inc. ayenzi lumelo okanye ziqinisekiso malunga nolu xwebhu. Nakweyiphi na isiganeko i-KMC Controls, Inc. iya kuba noxanduva lwawo nawuphi na umonakalo, ngokuthe ngqo, okanye ngokungalindelekanga, ovela ngenxa okanye enxulumene nokusetyenziswa kolu xwebhu.
Ilogo ye-KMC luphawu lwentengiso olubhalisiweyo lwe-KMC Controls, Inc. Onke amalungelo agciniwe. Pat: https://www.kmccontrols.com/patents/.

TEL: 574.831.5250
IFEKSI: 574.831.5252
I-IMEYILI: info@kmccontrols.com

Amaxwebhu / Izibonelelo

I-KMC ILAWULA i-HPO-6700 Series Iibhodi zokuNgaqapheli iiBhodi [pdf] Isikhokelo soFakelo I-HPO-6700 Series Output Override Boards, HPO-6700 Series, Output Override Boards, Override Boards, Boards

Iimbekiselo

• Incwadi yokusebenzisa