IDea EVO20-P Passive Bi Amp Line Array System

Iinkcukacha

• Uyilo olubiyelweyo: 2-indlela yokwenziwa kabini 10 Inkqubo yeArray yeLayini
• Ii-LF Transducers: 400 W
• Ii-HF Transducers: 70 W
• UkuPhathwa kwamandla (RMS): LF: 400 W | HF: 70 W
• Uthintelo lwegama: LF: 8 Ohm | HF: 16 ​​Ohm
• I-SPL (Eqhubekayo / Ephakamileyo): 127/133 dB SPL
• Uluhlu lokuphindaphinda (-10 dB): N/A
• Uluhlu lokuphindaphinda (-3 dB): N/A
• Ukhuseleko: ISoftware eNjongo / yokuQikelela
• Iziqhagamshelo: +/-1 +/-2
• Ulwakhiwo lweKhabhinethi: N/A
• UkuGqibela kweGrile: N/A
• I-Rigging Hardware: Iyafumaneka
• Imilinganiselo (WxHxD): 626 mm x 570 mm x 278 mm
• Ubunzima: Akukho
• Izibambo: Iyafumaneka
• Izincedisi: N/A

Imiyalelo yokusetyenziswa kwemveliso

Ngaphezuluview:
I-EVO20-P yinkqubo ye-2-way passive dual 10 Line Array System eyilelwe ukusebenza kakuhle kwe-sonic kunye nokuthembeka. Ilungele ukuqinisa isandi esiphathwayo, izicelo zokukhenketha, ukufakwa okuphezulu kwe-SPL yeeklabhu, amabala emidlalo, okanye iindawo zokusebenza.

Iimbonakalo:

• Ii-transducers ezikumgangatho ophezulu zaseYurophu kunye namacandelo e-elektroniki
• Idibana nemigaqo yokhuseleko yaseYurophu kunye neziqinisekiso
• Ukwakhiwa okuphezulu kunye nokugqiba
• Ulungelelwaniso olulula, ukuseta, kunye nokusebenza

Usetyenziso:

• Inkqubo ephambili yokuqinisa isandi esiphathwayo okanye izicelo zokukhenketha
• Ukhetho olufanelekileyo lofakelo oluPhezulu lwe-SPL lwesandi seKlabhu, amabala emidlalo, okanye iindawo zokusebenza

UkuRigging kunye noFakelo:

• Landela imiyalelo yokurhweba yehardware enikelwe ngesixokelelwano sofakelo olukhuselekileyo
• Qinisekisa ulungelelwaniso olululo kunye nesithuba sokufikelela kwisandi esisiso

FAQ

Q: Ndiyiqwalasela njani inkqubo yeLayini yoLungelelaniso lwendlela yokusebenza kakuhle?
A: Icandelo lolungelelwaniso lwenkqubo kwincwadi yomsebenzisi libonelela ngezikhokelo kuBude beArray kunye neseto lweArray Curvature ukuphumeza ukhuselo olufunekayo oluthe nkqo kunye nomgca wokuphendula rhoqo.

Q: Ndingasebenzisa isoftwe yangaphandle ukuncedisa ekusekeni isixokelelwano seLayini yoLuhlu?
A: Ewe, ungasebenzisa iSofthiwe yokuJonga / yokuQikelela kunye ne-EASE FOCUS njengezikhokelo zokunceda ekumiseleni ii-angles ze-splay zangaphakathi kunye nokwandisa ii-engile zokugubungela ngokuthe nkqo phakathi kwezinto eziluluhlu.

Ngaphezuluview

I-EVO20-P yobuchwephesha be-2-indlela yokugqitha kabini ye-10 ”Inkqubo ye-Array yomgca inikezela ukusebenza kakuhle kwe-sonic kunye nokuthembeka kwiphakheji efanelekileyo nefikelelekayo ehlangabezana nayo yonke imigangatho yobuchwephesha beaudio, enabaguquleli abakumgangatho ophezulu waseYurophu kunye nezinto zombane, imigaqo yokhuseleko yaseYurophu kunye iziqinisekiso, ukwakhiwa okuphezulu kunye nokugqiba kunye nokulula kakhulu koqwalaselo, ukuseta kunye nokusebenza.
Ifunyanwe njengeyona nkqubo iphambili yokuqinisa isandi esiphathwayo okanye ukhenketho kwizicelo, i-EVO20-P inokuba lolona khetho lufanelekileyo lofakelo oluPhezulu lwe-SPL kwisandi seKlabhu, amabala emidlalo okanye iindawo zokusebenza.

Iimbonakalo

• IiTransducers zaseYurophu eziSetyenzisiweyo eziSebenza ngokuPhezulu zeIDEA
• I-8-slot waveguide enikezelweyo kunye ne-diffuser yolawulo lwe-directivity
• I-15-mm ye-birch plywood yokwakha kunye nokuqina okuqinileyo, okuqinileyo
• Neutrik NL-4 izihlanganisi
• I-6-mm edibeneyo ye-anchoring yensimbi kunye nenkqubo yokubhabha
• Amanqaku eengile ali-10 kumanyathelo ayi-1˚
• Inkqubo yokupeyinta enganyangekiyo, ekhoyo kumnyama nomhlophe
• Izibambo ezimbini ezidibeneyo
• Izincedisi ezikhethekileyo zothutho, ukugcinwa, i-ankile kunye nokubhabha

Usetyenziso

• I-SPL ephezulu ye-A/V yokuqinisa isandi esiphathwayo
• I-FOH yeendawo zokusebenza kunye neeklabhu ezinobungakanani obuphakathi
• Inkqubo engundoqo yoKhenketho lweNgingqi kunye neeNkampani zokuRenta
• Gcwalisa-Phantsi okanye inkqubo encedisayo ye-PA/Indlela yoMmandla yoMmandla omkhulu

Idatha yobugcisa

Indawo ebiyelweyo uyilo	10˚ Trapezoidal
LF Iidluliseli	2 × 10” Iiwoofers ezisebenza kakhulu
HF Iidluliseli	1 × umqhubi wokucinezela, 1.4 ″ isixa somqala sophondo, 75 mm (3 ngaphakathi) ikhoyili yelizwi
Amandla Ukuphatha (RMS)	LF: 400 W | HF: 70 W
Ngobizo Impedance	LF: 8 Ohm | HF: 16 ​​Ohm
SPL (Iyaqhubeka/Incopho)	127/133 dB SPL
Ukuphindaphinda Uluhlu (-10 dB)	66 - 20000 Hz
Ukuphindaphinda Uluhlu (-3 dB)	88 - 17000 Hz
Injongo/Ukuqikelela Isoftware	KULULA UKUJONGA
Ukhuseleko	90˚ Ukuthe tye
Izihlanganisi +/-1 +/-2	2 x Neutrik speakON® NL-4 ngokuhambelana neLF HF
IKhabhinethi Ukwakhiwa	15 mm Birch Plywood
Igrile	I-1.5 mm yensimbi ene-perforated weatherised kunye ne-foam ekhuselayo
Gqiba	Ihlala ixesha elide IDEA proprietary Aquaforce High Resistance inkqubo yokwaleka ipeyinti
Ukujikeleza Hardware	Ukuxhathisa okuphezulu, intsimbi egqunywe ngentsimbi edityanisiweyo ene-4-point rigging hardware iindawo ezili-10 ze-angulation points (0˚-10˚ ii-angles ze-splay zangaphakathi kwi-1˚step)
Imilinganiselo (WxHxD)	626 × 278 × 570 m
Ubunzima	35.3 kg
Izibambo	2 izibambo ezidibeneyo
Izincedisi	Isakhelo sokuqhafaza (RF-EVO20) Inqwelo yezothutho (CRT EVO20)

Imizobo yobuGcisa

Ulungelelwaniso lweNkqubo

Izikhokelo zentshayelelo kuLungiso lweSistim ye-Line-Array
I-Layini-Arrays isebenza ngenxa yokunxibelelana kwee-transducer ezahlukeneyo kwindawo nganye yoluhlu. Ezinye zolu nxibelelwano zikhokelela kwiziphumo ezibi, ezinje ngokugqwetheka kunye nemiba yesigaba, izibonelelo ze-energy summing kunye nenqanaba lolawulo oluthe nkqo olulawulayo njenge-advan.tagusebenzisa iisistim ze-Layini-Array.
Izicwangciso ze-IDEA DSP Line-Array zijolise ekuququzeleleni indlela elula yokuseta i-Line-Array kunye nokusasazwa kwaye igxininise kwizinto ezimbini ezisisiseko ezichaphazela ukuziphatha koluhlu ngokubhekiselele kwi-directivity kunye ne-frequency response linearity.

Uluhlu Lobude
Into yokuqala i-Array Length, echaphazela uluhlu lwee-frequencies apho umgca wempendulo ye-array ichaphazeleka ngumgama opheleleyo phakathi kwe-axis yazo zonke ii-transducers ezihambelana nendiza ethe nkqo.
Oku kuphawuleka ngokukodwa kwi-LF, njengee-LF woofers, ngenxa yokusondela kwazo ngokunxulumene nebhendi yazo yokupasa, isixa samandla e-acoustic ngokukodwa ngokufanelekileyo, kwaye ifuna imbuyekezo amplitude yomqondiso we-LF ukusuka kwindawo ye-crossover kunye ne-subwoofers ukuya kwiindawo ezahlukeneyo zokuphindaphinda ngokuxhomekeke kwinani lezinto ezikhoyo kwi-array.

Ukulungiselela le njongo iSeto zidityaniswe ngobude obune beArray/Iziqalelo zokubala: 4 -6, 6-8, 8-12 kunye ne-12-16.

Uluhlu lweCurvature
Inqaku lesibini eliphambili kwi-DSP yokucwangcisa i-Arrays kukugoba koluhlu. Udibaniso oluninzi olwahlukeneyo lwee-engile lunokusetwa ngabasebenzi boluhlu lomgca, ukukhulisa ukhuselo olufunekayo oluthe nkqo olufunekayo kwisicelo.

Abasebenzisi banokusebenzisa i-EASE FOCUS njengesikhokelo sokufumana ii-angles ezifanelekileyo ze-splay zangaphakathi phakathi kwezinto zoluhlu.
Qaphela ukuba isixa see-engile ze-splay zangaphakathi kunye nee-engile zokhuselo ezithe nkqo zoluhlu azihambelani ngokuthe ngqo kwaye ubudlelwane bazo buyohluka ngobude boluhlu. (bona umzekeloampkancinci)

Izicwangciso ze-IDEA DSP
Iisetingi ze-IDEA DSP zisebenza kwiindidi ezi-3 zomndilili weArray curvature:

• MINIMUM (<30° eCetyisiweyo yaNgaphakathi yeAngulation Sum)
• PHAKATHI (30-60° eCetyisiweyo yaNgaphakathi ye-Angulation Sum)
• MAXIMUM (>60° eCetyisiweyo yaNgaphakathi yokuNyula iSambuku sokudlala)

KUKULULA I-Software yokuQikelela
EVO20-M Lula uJoliso GLL files ziyafumaneka ukuze zikhutshelwe kwiphepha lemveliso kunye nakwicandelo logcino lokukhuphela.

IXESHA ELINYE IXESHA ELINYE

<30° eCetyisiweyo yaNgaphakathi ye-Splay Angulation Sum
Ii-angles ze-splay zangaphakathi ezisezantsi zikhokelela kuluhlu "oluthe tye" olugxininisa ngakumbi kumandla e-HF kwi-acoustical axis ye-Array, ukufumana amandla amakhulu e-HF kumgama omkhulu (ukuphucula "ukuphosa") kodwa kucuthe ukugubungela okuthe nkqo okusebenzisekayo.

Ezi setingi ziyafumaneka kwi-TEOd9 kunye nabanye abaqhubekeki be-DSP ye-Stan-dalone yaNgaphandle kwiinkqubo ze-IDEA Active Line-Array ezifana ne-EVO20-M, kwaye ibandakanywe kwi-IDEA System-Amplifier DSP Solutions.

4-6 × EVO20-M izinto
Exampumfanekiso ubonisa i-4˚×5-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 16˚]

 

6-8 × EVO20-M izinto
Exampumfanekiso ubonisa i-3˚×7-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 18˚]

8-12 × EVO20-M izinto
Exampumfanekiso ubonisa i-2˚×10-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 18˚]

12-16 × EVO20-M izinto
Exampumfanekiso ubonisa i-1˚×14-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 13˚]

INGXELO EPHAKATHI YOMANDLA

30 ° - 60 ° eCetyisiweyo yeSplay Angulation Sum
Eli lelona nqanaba liluncedo lokhuselo oluthe nkqo kwezona zicelo ziqhelekileyo zoLayitho-nkqubo obhabhayo kwaye iyakuqinisekisa ukhuselo olulungeleleneyo kunye ne-SPL ngaphakathi kwendawo yokumamela uninzi lwezicelo.

Oku kusetwa kwangaphambili kufunyanwa njengomgangatho kwi-EVO20-M ehlanganisiweyo ye-DSP kwaye inokukhethwa ngokuthe ngqo kujongano lwepaneli yangasemva njengoko kubonisiwe kwiCandelo lolu xwebhu.

4-6 × EVO20-M izinto
Exampumfanekiso ubonisa i-9˚×5-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 36˚]

6-8 × EVO20-M izinto
Exampumfanekiso ubonisa i-6˚×7-uqwalaselo lweziqalelo
[I-engile ye-splay iyonke: 36

8-12 × EVO20-M izinto
Exampumfanekiso ubonisa i-4˚×10-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 36˚]

12-16 × EVO20-M izinto
Exampumfanekiso ubonisa i-3˚×14-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 39˚]

IXESHA ELIKHULU LOKUGQIBELA

60° eCetyisiweyo yaNgaphakathi ye-Splay Angulation Sum

Ukubalwa kwe-engile enkulu yangaphakathi kukhokelela ekugopheni okukhulu, kunye neepateni zokugubungela ezithe nkqo kunye noshwankathelo oluncinci lwamandla e-HF. Olu hlobo lwe-angling lufumaneka kwi-Arrays kunye nokubala kwebhokisi encinci okanye kwi-arrays enkulu ebekwe phantsi okanye efakwe kufuphi ne-grandstands kwiibala zeMidlalo.

Ezi setingi ziyafumaneka kwi-TEOd9 kunye nezinye iiprosesa zeDSP zaNgaphandle ezizimeleyo ze-IDEA Active Line-Array systems ezifana ne-EVO20-M kwaye zibandakanywe kwi-IDEA System-Amplifier DSP Solutions.

4-6 × EVO20-M izinto
Exampumfanekiso ubonisa i-10˚×5-uqwalaselo lweziqalelo
[Itotali ye-engile yomdlalo: 40˚]

6-8 × EVO20-M izinto
ExampUmfanekiso ubonisa ulungelelwaniso lwe-9˚×7-elementi

8-12 × EVO20-M izinto
ExampUmfanekiso ubonisa ulungelelwaniso lwe-7˚×10-elementi

12-16 × EVO20-M izinto
ExampUmfanekiso ubonisa ulungelelwaniso lwe-5˚×14-elementi

UkuRigging kunye noFakelo

Iimpawu ze-EVO20-M Line-Array zibandakanya i-hardware edibeneyo yokurhwatha kwentsimbi eyilelwe ngokukodwa ukuseta kunye nokusetyenziswa ngokulula. Ukuya kuthi ga kwi-10 yeenketho ze-angulation yangaphakathi kwi-1 ° amanyathelo akhoyo kunye neendawo ezinikezelweyo ze-stow zokusasazwa okuchanekileyo kunye nokukhawuleza koluhlu.
Oku kulandelayo zizinto ezisisiseko zonxulumaniso lwesiqalelo.

IZIKHOKELO EZISISEKO

1. Ukuqhubeka nokuseta uluhlu, khulula kwaye uvule amakhonkco angaphambili nangasemva kweyona nto iphantsi kwinkqubo.
2. Misa kwaye utshixe umphambili kunye nee-backlinks zecandelo elilandelayo kuluhlu usebenzisa izikhonkwane ezisecaleni ezigcinwe kumngxunya onikezelweyo obhalwe njengeStow.
3. Ekugqibeleni tshixa indawo oyifunayo ngephini elinikezelweyo eligcinwe kwiGroundstack/Stow hole. Phinda usebenze kuyo nayiphi na enye into ye-EVO20-M kwinkqubo.

INKCAZELO YENKQUBO YOKUNQUNYANYA

1. Cwangcisa inqwelo yezothutho kunye nezinto ze-EVO20-M kwindawo oyifunayo kwaye utshixe ivili ukulungiselela ukuseta okukhuselekileyo.
2. Ukuba i-EVO20-M i-rigging frame structure ayidityaniswanga, qhubela phambili ukutshixa iindawo ezine zokuqhafaza kwesakhelo kwisakhiwo esidibeneyo sokurhweba sento ephezulu ye-EVO20-M.
3. Vula into esezantsi ye-EVO20-M kwinqwelo yokuthutha kwaye uqhubeke nokumisa inkqubo ukuya kwindawo ekhululekileyo kwinyathelo elilandelayo.
4. Cwangcisa i-angulation yangaphakathi ngokocwangciso olufunekayo
5. Ukuphakamisa izinto ezine eziphezulu ukuya kwinqanaba apho izinto ezilandelayo ze-EVO20-M kwinqwelo yezothutho zilungelelanisa ngokwendalo uluhlu olusele lusekiwe kwaye phinda la manyathelo angentla.

Izilumkiso ngoKhuseleko Izikhokelo

• Funda olu xwebhu ngocoselelo, landela zonke izilumkiso zokhuseleko kwaye uzigcinele kwikamva.
• Uphawu lwesikhuzo ngaphakathi kunxantathu lubonisa ukuba nayiphi na imisebenzi yokulungiswa nokutshintshwa kwecandelo kufuneka yenziwe ngabasebenzi abaqeqeshiweyo nabagunyazisiweyo.
• Akukho malungu asebenzisekayo ngaphakathi.
• Sebenzisa kuphela izincedisi ezivavanyiweyo kwaye zamkelwe yi-IDEA kwaye zinikezelwe ngumvelisi okanye umthengisi ogunyazisiweyo.
• Ufakelo, ukurhwaphiliza kunye nemisebenzi yokunqunyanyiswa kufuneka yenziwe ngabasebenzi abaqeqeshiweyo.
• Sebenzisa kuphela izincedisi ezichazwe yi-IDEA, ngokuthobela imilinganiselo yomthwalo ophezulu kunye nokulandela imigaqo yokhuseleko lwasekuhlaleni.
• Funda iinkcukacha kunye nemiyalelo yoqhagamshelo phambi kokuba uqhubele phambili ukudibanisa inkqubo kwaye usebenzise kuphela ikhebula enikezelweyo okanye ecetyisiweyo yi-IDEA. Uqhagamshelo lwenkqubo kufuneka lwenziwe ngabasebenzi abaqeqeshiweyo.
• Iinkqubo zokuqinisa isandi ezinobuchwephesha zinokunikezela ngamanqanaba aphezulu e-SPL anokuthi abangele umonakalo wokuva. Musa ukuma kufutshane nenkqubo ngelixa usetyenziswa.
• Isandisi-lizwi sivelisa umhlaba wemagnethi nangona singasetyenziswa okanye naxa siqhawukile. Musa ukubeka okanye uveze isandisi-lizwi kuso nasiphi na isixhobo esinovakalelo kumhlaba wemagnethi onjengeemonitha zikamabonakude okanye ugcino lwedatha imathiriyeli enemagnethi.
•  Nciphisa isixhobo ngexesha lesiphango sombane naxa singasetyenziswa ixesha elide.
• Musa ukusibeka esi sixhobo emvuleni okanye ekufumeni.
• Musa ukubeka naziphi na izinto eziqulethe ulwelo, njengeebhotile okanye iiglasi, phezu kweyunithi. Musa ukutshiza ulwelo kwiyunithi.
• Coca ngelaphu elimanzi. Musa ukusebenzisa izicoci ezisekelwe kwi-solvent.
• Rhoqo jonga izindlu zesandisi-lizwi kunye nezixhobo ezibonakala zigugile, kwaye uzibuyisele xa kukho imfuneko.
• Thumela zonke iinkonzo kubasebenzi benkonzo abaqeqeshiweyo.
• Olu phawu kwimveliso lubonisa ukuba le mveliso akufanele iphathwe njengenkunkuma yendlu. Landela imimiselo yasekuhlaleni yokurisayikilishwa kwezixhobo zombane.
• I-IDEA iyala naluphi na uxanduva ekusetyenzisweni kakubi okunokuthi kubangele ukungasebenzi kakuhle okanye umonakalo wesixhobo.

Iwaranti

• Zonke iimveliso ze-IDEA ziqinisekisiwe ngokuchasene naso nasiphi na isiphene sokuvelisa ixesha leminyaka emi-5 ukususela kumhla wokuthengwa kwezixhobo ze-acoustical kunye neminyaka emi-2 ukususela kumhla wokuthengwa kwezixhobo zombane.
• Isiqinisekiso asibandakanyi umonakalo ekusetyenzisweni kakubi kwemveliso.
• Nakuphi na ukulungiswa kwegaranti, ukutshintshwa kunye nokuhanjiswa kweenkonzo makwenziwe kuphela ngumzi-mveliso okanye ngawo nawaphi na amaziko eenkonzo agunyazisiweyo.
• Musa ukuvula okanye ujonge ukulungisa imveliso; kungenjalo ukusevisa kunye nokutshintshwa akuyi kusebenza kulungiso lwesiqinisekiso.
• Buyisela iyunithi eyonakalisiweyo, emngciphekweni womthumeli kunye nomthwalo ohlawulwa ngaphambili, kwiziko lenkonzo elikufutshane kunye nekopi ye-invoyisi yokuthenga ukuze ufune inkonzo yesiqinisekiso okanye ukutshintshwa.

Isibhengezo sokuThobela
I MAS D Electroacústica SL , Pol. A Trabe 19-20 15350 CEDEIRA (Galicia – Spain), ibhengeza ukuba i-EVO20-P ithobela le Mikhombandlela ye-EU ilandelayo:

• I-RoHS (2002/95/CE) Ukuthintelwa kwezinto ezinobungozi
• I-LVD (2006/95/CE) iVol ephantsitagUmyalelo
• I-EMC (2004/108/CE) Ukuhambelana kwe-Electro-Magnetic
• I-WEEE (2002/96/CE) Inkunkuma yeziXhobo zoMbane kunye nezoMbane
• I-EN 60065: 2002 Umsindo, ividiyo kunye nezixhobo zombane ezifanayo. Iimfuno zokhuseleko.
• I-EN 55103-1: Ukuhambelana kwe-Electromagnetic: Ukukhutshwa
• I-EN 55103-2: Ukuhambelana kwe-Electromagnetic: Ukungakhuseleki

UPol. A Trabe 19-20, 15350 - Cedeira, A Coruña (España) Tel. +34 881 545 135
www.ideaproaudio.com
info@ideaproaudio.com

Iinkcukacha kunye nenkangeleko yemveliso inokuthi itshintshe ngaphandle kwesaziso. Las especificaciones y aparienca del prodcuto pueden estar sujetas a cambios.
IDEA_EVO20-P_UM-BIL_v4.0 | 4 – 2024

Amaxwebhu / Izibonelelo

IDea EVO20-P Passive Bi Amp Line Array System [pdf] Incwadi yokusebenzisa EVO20-P Passive Bi Amp Inkqubo ye-Array yomgca, i-EVO20-P, i-Passive Bi Amp Inkqubo yoluhlu lwemigca, Amp Uluhlu lweSistim yomgca, iNkqubo yeSixokelelwano

Iimbekiselo

• Incwadi yokusebenzisa