ISixhobo seNkqubo ye-SETI yoMqhubi we-LED
Incwadi Yemiyalelo

eldoLED Field SET LED Driver Programming Tool

Isixhobo sokuCwangcisa se
I-Field SET™ abaqhubi be-LED boTshintsho lweNdawo

Intshayelelo

I-Field SET Driver Programming Tool esuka kwi-eldoLED® sisixhobo esiphathwayo esenzelwe iikontraki zombane, abafaki kunye nabahambisa inkqubo kunye nokuqwalasela iiparitha zokusebenza ze-FieldSET Replacement LED Drivers. Isixhobo sisebenza ngebhetri kwaye asifuni ukuba ilaptop isebenze, ivumela ukusetyenziswa okuguquguqukayo kwiindawo ezixineneyo.
I-FieldSET Driver Programming Tool iyakwazi ukucwangcisa ezona zicwangciso zimbini zibalulekileyo zomqhubi: I-Output Current (mA) kunye neNqanaba eliDima kancinci. Isixhobo sixhotyiswe ngokusebenza kweprogram ye-batch, ukwenzela ukuba iiparitha ezifanayo zingasetyenziswa kubaqhubi abaninzi. I-FieldSET LED Driver Programming Tool ingasetyenziselwa UKUFUNDA iiparamitha kumqhubi okhoyo we-OPTOTRONIC ®,
kwaye inkqubo iparameters ezifanayo kwiFieldSET
Ukutshintshwa kwe-LED Driver. Emva kokuba izicwangciso zomqhubi ezikhoyo FUNDA, iiparitha zivela kwisikrini se-LCD kunye nezikhombisi ze-LED, kwaye zinokutshintshwa ngokufanelekileyo.
Ukuba umqhubi okhoyo akanguye umqhubi webrand ye-OPTOTRONIC, izicwangciso zomqhubi zingaqwalaselwa ngaphakathi kwesixhobo sokudwelisa inkqubo kwaye zifakwe endaweni yomqhubi weFieldSET.

IziKhuseli ezibalulekileyo
Isilumkiso soMngcipheko wokuThwatywa koMbane

• Susa umbane okanye ucime umbane phambi kokulungiswa / ukusevisa.
• Qinisekisa ukuba unikezelo voltage ichanekile ngokuyithelekisa nolwazi lweleyibhile yomqhubi endaweni yakhe.
• Yenza konke ukudibanisa kombane kunye nomhlaba ngokuhambelana neKhowudi yoMbane yeSizwe (NEC) kunye naziphi na iimfuno zekhowudi yendawo.

Ukutshintshwa kwabaqhubi abasele bekho ngabaqhubi beFieldSET kufuneka kwenziwe ngusombane/unokontraka wombane onelayisensi.
Iwaranti yeMveliso eNcinciweyo iya kuba yinto engekhoyo ukuba ikontraka enelayisensi ayisetyenziswanga.
Abaqhubi be-FieldSET bajonge ukulungiswa kwe-in-field ye-luminaires esele ifakwe kwaye isebenza kwintsimi. Abaqhubi be-FieldSET abenzelwanga ukulungiswa kwakhona kwe-off-site ye-luminaires njengoko kuchazwe kwiNqaku le-100 le-NFPA 70, iKhowudi yoMbane yeSizwe.
Xa usebenzisa izixhobo zombane, amanyathelo okhuseleko asisiseko kufuneka asoloko elandelwa kubandakanya oku kulandelayo:

• Musa ukuqhagamshela isixhobo xa umqhubi enikwe amandla.
• Musa ukuplaga isixhobo kwicala le-AC lomqhubi xa umqhubi enikwe amandla.
• Qhagamshela kuphela isixhobo phakathi kwePRG kunye ne-LED- izikhonkwane zomqhubi.
• Isilumkiso: I-FieldSET LED Driver Programming Tool ayingobungqina bokuchitheka okanye ireyithingi emanzi.

Ukuphepha umngcipheko womonakalo kwibhodi ye-LED okanye icandelo, abaqhubi be-FieldSET akufuneki bacwangciswe kwimveliso ephezulu yangoku kunomqhubi ofakwe ngoku kunye nokutshintshwa / ukulungiswa.
Abaqhubi be-FieldSET nge-eldoLED bagutyungelwe yiwaranti eqingqiweyo yeminyaka emi-5. Esi kuphela kwewaranti enikeziweyo kwaye akukho ezinye iingxelo ezidala nayiphi na iwaranti yalo naluphi na uhlobo. Zonke ezinye iziqinisekiso ezichaziweyo nezichaziweyo azifunwa. Amagama apheleleyo ewaranti anokufumaneka apha www.acuitybrands.com/support/warranty/terms-and-conditions

GCINA LE MIYALELO UKUZE UBE NEREFREYIMBO KWIXESHA
Ndwendwela www.acuitybrands.com/support/warranty/terms-and-conditions

Izixhobo ezifunekayo

Uluhlu lomqhubi we-LED oluxhaswayo

I-FieldSET LED Driver Programming Tool inokucwangcisa i-FieldSET indawo yabaqhubi be-LED ngeeparamitha ezifunwayo zokutshintshwa kwintsimi. Apha ngezantsi kukho uluhlu lweFieldSET Replacement LED Drivers.

I-FieldSET yoLuhlu loMqhubi we-LED endaweni

Iimodeli zomqhubi	Inkcazo yomqhubi	Isicelo	UPC
OTi 30W UNV 1A0 1DIM DIM-1 FS	30W Linear 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 50W UNV 1A4 1DIM DIM-1 FS	50W Linear 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 85W UNV 2A3 1DIM DIM-1 FS	85W Linear 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 FS	25W Compact 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 J-HOUSING FS	25W Compact 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 FS	40W Compact 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 J-HOUSING FS	40W Compact 120-277V; 0-10V, 1% min dim	Ngaphakathi	1.97589E+11
OTi 100W UNV 1250C 2DIM P6 FS	100W Ngaphandle 120-277V; 0-10V, 10% min dim	Umzi-mveliso/Ngaphandle	1.97589E+11
OTi 180W UNV 1250C 2DIM P6 FS	180W Ngaphandle 120-277V; 0-10V, 10% min dim	Umzi-mveliso/Ngaphandle	1.97589E+11

I-FieldSET™ i-LED Driver Programming Tool ngokuJonga nje

4.1 Imisebenzi yeqhosha

1	Inkqubo yeCable Port	a. Ivumela uqhagamshelo lwentambo yocwangciso kwi-FieldSET Driver Programmer Tool
2	I-Micro USB	a. Iqhagamshela kwilaptop kuhlaziyo lwesoftware
3	Umboniso weLCD	a. Umboniso we-LCD uya kubonisa: Imveliso yangoku yokuseta kunye neekhowudi zeemposiso b. Umboniso weflash ubonisa impumelelo FUNDA/INKQUBO isiganeko
4	FUNDA/ AMANDLA	a. Xa isixhobo sicinyiwe, cofa kwaye ubambe eli qhosha ngomzuzwana omnye ukuze uvule isixhobo b. Xa isixhobo IVULIWE kwaye iqhagamshelwe ngokufanelekileyo kumqhubi we-LED, eli qhosha liyakufunda useto lomqhubi c. Emva kokuba FUNDA umsebenzi, izicwangciso zangoku zemveliso ziyakuboniswa kumboniso, kwaye ubuncinci benqanaba lobumnyama liya kuboniswa ngoBuncinane beZalathi zokuDima. d. I-beep evakalayo iviwa ngexesha le-FUNDA umsebenzi kunye nokudanyaza kokubonisa xa kugqityiwe e. FUNDA umsebenzi okhoyo kuyo nayiphi na i-OPTOTRONIC ngumqhubi we-eldoLED f. Ukucima isixhobo, tyhala kwaye ubambe iqhosha ngomzuzwana omnye
5	MIN DIMMING Izalathisi	a. Isibonisi se-LED esikhanyayo sibonisa ubuncinci obukhethiweyo benqanaba elimnyama b. Iimpawu ezidanyazayo ze-LED zibonisa ukuba i-Dim-to-Off ivuliwe kwaye umqhubi uya kungena kwimodi yokulinda, ukucima imveliso ye-LED xa i-dimmed ngaphantsi kwenqanaba elincinci lokunciphisa. c. I-LED eSolid ibonisa ukuba i-Dim-to-Off ivaliwe. Umqhubi akakwazi ukucima (0%) ngolawulo lwe-0-10V; kuphela i-AC Mains enokucima umqhubi.
6	MIN DIMMING Umkhethi	a. Umsebenzisi unokukhetha iNqanaba eliNcinci lokufiphala ukuya kwi-1% (eblue), 5% (yellow), kunye ne-10% (i-orenji) -inqunyelwe uluhlu lomqhubi okhoyo oza kutshintshwa. b. 0% ubuncinci benqanaba lobumnyama, obukwabizwa ngokuba yiDim-to-Off, inokukhethwa ngokutyhala kwaye ubambe iMin Dimming iqhosha imizuzwana emi-3.
7	INKQUBO	a. Umsebenzi wePROGRAM uza kusebenzisa iiparamitha ezibonisiweyo kumqhubi oqhagamshelweyo b. I-beep evakalayo ivakala ngexesha lomsebenzi wePROGRAM kunye nokubonisa ukukhanya xa uphumelele c. Umsebenzi weNKQUBO uyafumaneka kubaqhubi be-FieldSET LED (bona itheyibhile ye-FieldSET yoLuhlu loMqhubi we-LED)
8/9	ISETHI YAM ngoku	a. Umsebenzisi unokuseta amanqanaba akhoyo emveliso esebenzisa amaqhosha okunyusa aphezulu/ezantsi ngaphakathi koluhlu lwe-150-3000mA

UQhagamshelwano lweHardware

PHAWULA: Kucetyiswa ngamandla ukuba ususe umqhubi omtshintshayo kulungiso ngaphambi kokuba ulandele la manyathelo angezantsi. Umqhubi kufuneka akhutshwe kwi-Main Power ngaphambi kokuba asuse okanye enze uqhagamshelwano.

Inyathelo loku-1
Qhagamshela intambo yokucwangcisa kwi-FieldSET Driver Programming Tool

Inyathelo loku-2
Qhagamshela intambo yokucwangcisa kumqhubi'

Inyathelo loku-3
Qhagamshela intambo yokucwangcisa kumqhubi wePRG kunye ne-LED ebomvu yePOS (+) kunye neeterminal eziMnyama NEG (-) kumqhubi

Umgca	Icwecwe	Ngaphandle
Qaphela: Ukudityaniswa kwephini kufuneka kucuthwe kancinane kwiimodeli zomgca ukuze zivumelane nepitch yetheminali.
Umgca/Obambeneyo: PRG = Brown LED- = Luhlaza		Ngaphandle: PRG = I-Orenji LED- = Luhlaza

Ukuseta umqhubi kunye nokusebenza

6.1 Vula/cima isixhobo

1. Tyhila kwaye ubambe iqhosha elithi FUNDA/AMAMANDLA imizuzwana emi-3 ukuvula i-FieldSET LED Driver Programming Tool.
   a. Umboniso uya kudanyaza kwaye i-beep evakalayo ibonisa ukuba IYAKHANYA.
   b. Umboniso uya kubonisa ooziro abaphindwe kabini (00) ekuqaleni (ngaphandle kwebhokisi) ekuqaleni. Emva kokusetyenziswa kokuqala, umboniso kunye nezikhombisi ze-LED ziya kubonisa izicwangciso ezifakiweyo zangaphambili xa umdwelisi weprogram evuliwe.
   c. Ukuba ifowuni ayilayitiyo, jonga ukuba iibhetri zifakwe kakuhle kwaye zitshajiwe. Isixhobo sisebenzisa (1) 9V ibhetri.
2. Isixhobo sikulungele ukusetyenziswa.
3. Ukucima isixhobo, tyhala kwaye ubambe FUNDA/ AMANDLA imizuzwana emi-5.

6.2 FUNDA iiparamitha kumqhubi we-OPTOTRONIC wokuqala (qaphela: amanyathelo 6.2 asebenza kuphela kubaqhubi be-OPTOTRONIC)

1. Qinisekisa ukuba umqhubi okhoyo akanikwa mandla.
2. Cofa iqhosha elithi FUNDA ukufaka iMowudi yokuFunda yoku-1.
3. Qhagamshela intambo yokucwangcisa kumqhubi wokuqala wePRG kunye neetheminali ze-LED (-).
   a. Ibeep evakalayo kunye nesibane sesikrini zibonisa ngempumelelo FUNDA.
4. Izicwangciso zomqhubi ziya kulayishwa kwisixhobo seprogram kwaye ziboniswe kwi-LCD kunye nezibonakaliso ze-LED.
5. Cofa iqhosha elithi FUNDA kwakhona ukuphuma kwindlela ethi FUNDA. Izicwangciso ziya kugcinwa.
   PHAWULA: Imowudi yoku-1 ivumela umsebenzisi ukuba enze umqhubi ngezicwangciso ezikhethiweyo.
   I-FieldSET Programming Tool ayigqibekanga kwiMowudi yoku-1.
   Ukusebenzisa i-FieldSET Programming Tool kwi-Mode 2 ivumela umsebenzisi ukuba akopishe kwaye anamathisele izicwangciso zomqhubi wokuqala kodwa akavumeli umsebenzisi ukuba aguqule izicwangciso zomqhubi. Ngemiyalelo yenkqubo yeNdlela yesi-2, bhekisa kwiSihlomelo sesiSikhokelo soMsebenzisi seFieldSET.

6.3 Lungisa iiparamitha

1. Sebenzisa i-CURRENT SET ukulungisa imveliso yangoku.
2. Sebenzisa i-MIN DIMMING umkhethi ukulungisa ubuncinci benqanaba lobumnyama.
3. Ukuba umqhubi ufuna ukucuthwa ukuba acime (imo yokulinda) ngenkqubo yolawulo ye-0-10V, i-Dim-to-Off inokwenziwa ngokutyhala nokubamba i-MIN DIMMING.
   ISILUMKISO: Ukwandisa inqanaba langoku lokuqhuba (mA) lomqhubi otshintshileyo kuya kwaphula iimfuno zokutshintshiselana kwabaqhubi abalinganiswe njengeKlasi P yi-Underwriters Laboratories.

6.4 INKQUBO umqhubi wokutshintsha weFieldSET

1. Qinisekisa ukuba umqhubi akanamandla.
2. Nje ukuba izicwangciso ezichanekileyo zilayishwe kwiSixhobo seNkqubo, cofa iqhosha lePROGRAM ukufaka imo yenkqubo.
   a. Isixhobo siya kubetha kwaye silinde uxhulumaniso kumqhubi
3. Qhagamshela intambo yeprogram kwi-FieldSET driver driver PRG kunye ne-LED (-) iitheminali
   a. Ibeep evakalayo kunye nesibane sesikrini zibonisa INKQUBO eyimpumelelo
4. Cofa iqhosha elithi PROGRAM kwakhona ukuphuma kwimowudi yodweliso.
5. I-FieldSET Driver ngoku ilungele ukuhlohla. Jonga kwimiyalelo yokufaka iintambo zomqhubi.

Inkqubo yoMqhubi

Kukho iimeko ezintathu xa utshintsha umqhubi ofakwe kuqala. Nceda ujonge le miyalelo ilandelayo yemeko yenkqubo esebenzayo endaweni yakho:

Imeko 1
Umqhubi we-original ngumqhubi we-OPTOTRONIC we-LED ocwangcisekileyo
Inyathelo loku-1
Qhagamshela iCable yeNkqubo kwi-FieldSET Programmer kwaye ucinezele kwaye ubambe iqhosha le-POWER ukuze uvule.
Isikrini siya kuzilayisha ngokuzenzekelayo useto ukusuka kusetyenziso lwangaphambili.
Inyathelo loku-2
Ukufunda useto oluvela kuMqhubi wokuqala, cofa iqhosha elithi FUNDA kwaye emva koko uqhagamshele iCable yeNkqubo kuMqhubi wokuqala (qiniseka ukuba umqhubi akanikwa amandla). Ukuba i-Read iphumelele, isikrini siya kukhanya, isandi esivakalayo siya kuviwa, kwaye izicwangciso ezicwangcisiweyo zomqhubi ziya kuboniswa kwisikrini kunye nezikhombisi ze-LED.
Inyathelo loku-3
Yenza naluphi na uhlengahlengiso olufunekayo kwizicwangciso zeprogram (ukuba kuyimfuneko). Sebenzisa i-SETI ye-CURRENT amaqhosha ukunyenyisa umgangatho wemveliso yangoku kwaye usebenzise i-MIN DIMMING iqhosha ukunyenyisa ubuncinci benqanaba lobumnyama. Ukuba iFieldSET Replacement Driver kufuneka ifane nokusebenza kanye koMqhubi weNdawo, musa ukwenza naluphi na utshintsho kwizicwangciso.
ISILUMKISO: ukunyusa umgangatho wangoku wokuqhuba (mA) womqhubi otshintshileyo uya kwaphula iimfuno zokutshintshatshintsha kweUL Udidi lweP.
Inyathelo loku-4
Ukusebenzisa useto kwiFieldSET Replacement Driver, cofa kuqala iqhosha lePROGRAM uze uqhagamshele iCable Cable kwiFieldSET Replacement Driver. Ukuba useto lulayishwe ngempumelelo, isikrini siya kudanyaza Kwenziwe kwaye isandi esivakalayo siya kuviwa. Cofa iqhosha elithi PROGRAM kwakhona ukuphuma kwimowudi yodweliso.
Imeko 2
Umqhubi woqobo luphawu ngaphandle kwe-OPTOTRONIC kwaye uneleyibhile equka imveliso yangoku (ma okanye A) kunye/okanye imimiselo yezinga elimnyama
Inyathelo loku-1
Xhuma iCable yeNkqubo kwi-FieldSET Driver Programmer Tool kwaye ucinezele kwaye ubambe iqhosha le-POWER ukuze uvule. Isikrini siya kuzilayisha ngokuzenzekelayo useto ukusuka kusetyenziso lwangaphambili.
Inyathelo loku-2
Sebenzisa ISETHI yamaqhosha ukulungelelanisa umgangatho wemveliso yangoku kwisikrini kwaye usebenzise i MIN DIMMING iqhosha ukunyenyisa ubuncinci bomgangatho wobumnyama ukuze utshatise izicwangciso ezidweliswe kwileyibhile yoMqhubi weNdawo.
Inyathelo loku-3
Ukusebenzisa useto kwiFieldSET Replacement Driver, cofa kuqala iqhosha lePROGRAM uze uqhagamshele iCable Cable kwiFieldSET Replacement Driver. Ukuba useto lulayishwe ngempumelelo, isikrini siya kudanyaza Kwenziwe kwaye isandi esivakalayo siya kuviwa. Cofa iqhosha elithi PROGRAM kwakhona ukuphuma kwimowudi yodweliso.
Imeko 3
Umqhubi woqobo luphawu olungaphandle kwe-OPTOTRONIC kwaye akanayo ileyibhile equka imveliso yangoku (mA okanye A) kunye/okanye imimiselo yezinga elimnyama

Qhagamshelana nomvelisi wesixhobo kwaye ubuze useto lomqhubi olusetyenziswa kwisibane sokukhanya. Ngokwesiqhelo, baya kukwazi ukujonga olu lwazi ngenombolo yenxalenye/inkcazo. Ukuba umenzi wokulungisa akafumaneki, okanye akakwazi ukubonelela ngezicwangciso zomqhubi, ukhetho lodwa kukulinganisa imveliso yomqhubi yangoku kunye nenqanaba elimnyama kwinkqubo yokusebenza. Imilinganiselo kufuneka yenziwe kuphela ngabasebenzi abaqeqeshiweyo abanamava ombane okanye uqeqesho olusisiseko. Ndwendwela isibane esisebenza ngokufanayo (inxalenye yenombolo efanayo) ukwenza umlinganiselo (i-multimeter iyafuneka.)

Amanyathelo oMlinganiso – Imveliso yangoku (ma):

• Khubaza umbane kwaye ufikelele kuMqhubi.
• Susa uqhagamshelwano naziphi na iingcingo eziqhagamshelwe kwi-DIM (+) PURPLE yoMqhubi kunye ne-DIM(-) EGREY okanye iPINK iitheminali/imicingo. I-DIM (+) kunye ne-DIM (-) kufuneka ivuleke-isekethe ukuze uMqhubi akhuphe i-100% xa inikwe amandla.
• Seta i-Multimeter ukulinganisa i-DC current (mA).
• Xhuma i-Multimeter ukulinganisa imveliso yoMqhubi ngoku kwi-LED.
• Ukuba usebenzisa iCl yangokuamp Phanda, clamp malunga ne-LED (+) RED imveliso yocingo loMqhubi.
• Ukuba usebenzisa iiKhokelo zoVavanyo, kuya kufuneka uqhawule umdibaniso phakathi koMqhubi we-LED (+) imveliso ye-RED kunye ne-LED (+) igalelo.
  Xhuma iiKhokelo zoVavanyo kuthotho ukuvala isekethe.
• Yomeleza ngokukhuselekileyo isixhobo kwaye ulinganise imveliso yangoku (mA). Qaphela eli xabiso ukuze lisetyenziswe kamva. Susa amandla kumdlalo.
  Shiya i-Multimeter iqhagamshelwe kumlinganiselo omncinci wenqanaba elimnyama.

Amanyathelo oMlinganiso-Ubuncinane beNqanaba eliDim:

• Ukulinganisa ubuncinci benqanaba le-dim, gcina i-Multimeter efakwe ngendlela efanayo nangaphambili, kwaye mfutshane i-DIM yoMqhubi (+) PURPLE kunye ne-DIM (-) GRAYI okanye iPINK iiterminal/ingcingo. Ukunciphisa i-DIM (+) kunye ne-DIM (-) iya kunyanzela uMqhubi ukuba anciphise imveliso yakhe ukuya kwinqanaba eliphantsi. Nceda uqaphele, ubuncinci benqanaba lobumnyama linokuba ngu-0% (off).
• Oku kungaphunyezwa ngokufaka i-wire jumper, ubhedu oluqinileyo 16-22 AWG, phakathi kwe-DIM(+) PURPLE kunye ne-DIM(-) GRAYI okanye iPINK.
• Ukuba umqhubi unezikhokelo ezibhabhayo, vele uqhagamshele i-DIM (+) kunye ne-DIM (-) kunye usebenzisa isimbo se-WAGO uQhagamshela ngokukhawuleza okanye okufanayo.
• Yenza ngokukhuselekileyo amandla ombane kwaye ulinganise imveliso yangoku (mA) ngexesha elimnyama ngeMultimeter.
• Bala ubuncinci benqanaba lobumnyama: Yahlula imveliso yangoku ngexesha lemo edimsiweyo epheleleyo ngemveliso yangoku ngexesha elipheleleyo le-100%. Iya kuba yi-1%, 5%, okanye i-10%. Qaphela eli xabiso ukuze lisetyenziswe kamva.
• Susa amandla kumdlalo. Susa i-Multimeter kwaye uphinde udibanise i-fixture.

Inyathelo loku-1
Qhagamshela iCable yeNkqubo kwi-FieldSET Programmer kwaye ucinezele kwaye ubambe iqhosha le-POWER ukuze uvule. Isikrini siya kuzilayisha ngokuzenzekelayo useto ukusuka kusetyenziso lwangaphambili.
Inyathelo loku-2
Sebenzisa i-CURRENT SET amaqhosha ukulungisa umgangatho wemveliso yangoku kwisikrini kwaye usebenzise i-MIN DIMMING iqhosha ukunyenyisa ubuncinci bomgangatho wobumnyama ukuze utshatise useto olulinganisiweyo ukusuka kulungiso olufanayo lokusebenza.
Inyathelo loku-3
Ukusebenzisa useto kwiFieldSET Replacement Driver, cofa kuqala iqhosha lePROGRAM uze uqhagamshele iCable Cable kwiFieldSET Replacement Driver. Ukuba useto lulayishwe ngempumelelo, isikrini siya kudanyaza Kwenziwe kwaye isandi esivakalayo siya kuviwa. Cofa iqhosha elithi PROGRAM kwakhona ukuphuma kwimowudi yodweliso.

Iikhowudi zeemposiso

Iikhowudi ezahlukeneyo zempazamo ziya kuboniswa kwiscreen seLCD kuyo nayiphi na imeko ekhankanywe kwitheyibhile engezantsi:

Umyalezo wemposiso	Inkcazo yeempazamo
Er:01 AYIFANELEKILE	Impazamo yonxibelelwano ngexesha lokufunda. Jonga uqhagamshelwano kumqhubi.
Er:02 AYIFANELEKILE	Impazamo yonxibelelwano ngexesha lokucwangcisa. Jonga uqhagamshelo kumqhubi.
Er:03 NoRd	Umqhubi akaziwa sisixhobo sokucwangcisa.
Er :04 ndiya HI	Indawo yangoku yokumisela iphezulu kakhulu kumqhubi oqhagamshelweyo.
Er:05 Ndiyabona	Indawo yangoku yokumisela iphantsi kakhulu kumqhubi oqhagamshelweyo.
Er:06 ixhama	Ubuncinci benqanaba elimnyama alixhaswa ngumqhubi oqhagamshelweyo.
Er:07 Qaphela	Ukhuseleko olungalunganga lunciphisa ixabiso ledatha.
Er:08 CLO	Idatha engasebenziyo yemveliso yelumen.
Er:09 ngoku	I-0-10V engasebenziyo yedatha yomda wokuncipha.
Er:10 C Id	Ukuzama umqhubi weprogram ongahambelaniyo nedatha egciniweyo.
Er:11 Nap	Isixhobo asikuxhasi udweliso lwenkqubo umqhubi oqhagamshelweyo.
ilulwane	Ibhetri iphantsi; buyisela ibhetri.
Layisha	Iingcingo kumqhubi zifutshane okanye izikhonkwane zeprogram zifakwe ngasemva.

Ukutshintshwa kwebhetri

a. Isixhobo soMdwelisi sinikwe amandla yibhetri eyi-1 (9V)
b. Vula indawo yebhetri ukufikelela kwibhetri

Iinkcukacha

Amandla

Igalelo Voltage (DC)	9V (Ibhetri iyasebenza)
USB Interface	USB 1.1 okanye 2.0
Uhlobo lwePort USB	IMicro-B
Ubude beCable ye-USB	3 iinyawo
Inkqubo yeCable	I-2-Umqhubi (22AWG) - Ngaphakathi / Ngaphandle
Inkqubo Ubude beCable	3 iinyawo

10.1 IiNkcazo zeNdalo

Ubushushu bokusebenza kwi-Ambient	0°C ukuya +50°C
Max. Ugcino Temp. IMigangatho yoLawulo	0°C ukuya +50°C
ImiGangatho yokuSingqongileyo	RoHS, FIKELELA
IP Rating	IP20
Ukuthotyelwa kwe-EMI	I-FCC iCandelo le-15 udidi A

10.2 Iinkcukacha zoomatshini
Izindlu

Ubude	6.5″ (165mm)
Ububanzi	3.1″ (80mm)
Ubude	1.1″ (28mm)

Isihlomelo

Imowudi yesi-2 – i-OPTOTRONIC yeMiyalelo yeNkqubo yoMqhubi

1. Qinisekisa ukuba umqhubi okhoyo akanikwa mandla.
2. Qhagamshela uMcwangcisi kumqhubi we-LED
3. Vula uMcwangcisi kwaye uyigcine kwindawo ezinzileyo (zombini FUNDA & IZIbane zeNKQUBO zicimile-akukho sandi sibhipayo)
4. Cinezela i FUNDA & Yangoku(-) ngaxeshanye iqhosha ukufaka iNdlela yokuFunda 2 (imizuzwana emi-3.)
   Isikrini siya kubonisa "OP_2" kwaye idanyaze ngemveliso ekhutshelweyo yangoku kunye ne-dim profile.
   a. Isixhobo siya kubetha kwaye silinde uxhulumaniso kumqhubi.
5. Qhagamshela intambo yokucwangcisa kumqhubi wokuqala wePRG kunye neetheminali ze-LED (-).
   a. Ibeep evakalayo kunye nesibane sesikrini zibonisa ngempumelelo FUNDA.
6. Izicwangciso zomqhubi ziya kulayishwa kwisixhobo sokucwangcisa. Umboniso uya kubonisa kuphela imveliso yangoku, inqanaba lokuncipha kunye nemo ye-D2O (nayiphi na enye into efana ne-CLO ukuba ikhutshelwe ayizukubonakala.)
7. Cofa iqhosha elithi FUNDA kwakhona ukuphuma kwindlela ethi FUNDA. Izicwangciso ziya kugcinwa. KwiModi yokuFunda 2, iiparamitha azinakuhlengahlengiswa.

QAPHELA: Iisetingi zigcinwa nokuba umdwelisi wenkqubo icinyiwe (oku kubonakala xa "OT_2" idanyaza kwiLCD.
UKUSUSA ULWAZI LUGCINWE: Beka iyunithi kwindawo engatshintshiyo (FUNDA & IZIbane zeNKQUBO zicimile) kwaye ufunde umqhubi. Awuyi kubona u-"OT_2" flash kwi-LCD.

https://qrs.ly/h6ed5w8
Fumana ezinye izibonelelo kwi
www.acuitybrands.com/FieldSET
NgeNkxaso yobuGcisa, qhagamshelana no-1-800-241-4754
or eldoLEDtechsupport@acuitybrands.com
www.acuitybrands.comIinkcukacha zinokutshintshwa ngaphandle kwesaziso. Okwenziweyo kunokwenzeka
ziyahluka ngenxa yokusingqongileyo komsebenzisi wokugqibela kunye nesicelo. Enye indlela yeLithonia, Conyers, GA 30012 | Ifowuni: 877.353.6533 | www.acuitybrands.com
© 2023 Acuity Brands Lighting, Inc. Onke amalungelo agciniwe. | EL_1554355.03_0723

Amaxwebhu / Izibonelelo

FieldSET eldoLED FieldSET LED Driver Programming Tool [pdf] Incwadi Yomyalelo eldoLED FieldSET LED Driver Programming Tool, eldoLED, FieldSET LED Driver Programming Tool, LED Driver Programming Tool, Driver Programming Tool, Programming Tool

Iimbekiselo

• Incwadi yokusebenzisa