Umlawuli we-CA-1 ozenzekelayo, i-V2
Isikhokelo soFakelo
Imodeli exhaswayo
• I-C4-Cal-V2 i-Automation Controller, i-CA-1, i-V2
Intshayelelo
I-Control4® CA-1 Automation Controller yenza ukulawula izibane, iinkqubo zokhuseleko, izinzwa, ukuvala umnyango, kunye nezinye izixhobo ezilawulwa yi-IP, ZigBee, 2-Wave®, okanye i-serial connections. Umlawuli uneprosesa ekhawulezayo, i-antenna yangaphandle yerediyo yeZigBee®, i-slot yangaphakathi yemodyuli ye-Z-Wave™ (ithengiswa ngokwahlukileyo), kwaye inokunikwa amandla yi-PoE. Lo mlawuli ufanelekile kwikhaya, amagumbi, kunye nolunye ufakelo olungadingi IR
ukulawula okanye ukusasazwa komsindo.
Emva kokufaka kunye nokuqwalasela umlawuli kunye nezinye izixhobo ze-Control4, abathengi bakho banokulawula inkqubo yabo usebenzisa i-Control4 apps, i-remote controls ye-system, izikrini zokuchukumisa, okanye ezinye izixhobo ezixhaswayo ze-Control4 (ezithengiswa ngokwahlukeneyo).
Imixholo yebhokisi
- Umlawuli we-CA-1 ozenzekelayo
- Unikezelo lwamandla lwangaphandle kunye neeadaptha zeeplagi zamazwe ngamazwe
- Iimpondo (1 zeZigBee)
Izixhobo ezikhoyo zokuthengwa
- Imodyuli ye-2-Wave – iNgingqi H (C4-ZWH)
- Imodyuli ye-Z-Wave – iNgingqi U (C4-ZWU)
- Imodyuli ye-Z-Wove – iNgingqi E (C4-ZWE)
Izilumkiso
Isilumkiso! Ukunciphisa umngcipheko wokutshatyalaliswa kombane, musa ukubeka esi sixhobo kwimvula okanye ukufuma.
Isilumkiso! Kwimeko yangoku kwi-USB, isoftwe ivala imveliso. Ukuba isixhobo se-USB esincanyathiselweyo asibonakali sisebenza, susa isixhobo se-USB kwisilawuli.
Ngolwazi oluthe vetshe, ndwendwela iMveliso amaphepha ku umthengisi.control4.com.
Iimfuno kunye neenkcukacha
Phawula: I-Ethernet kufuneka ifakwe ngaphambi kokuqala isilawuli se-CA-1 ukufakela.
Phawula: Isoftware efunekayo ukumisela esi sixhobo yiComposer Pro. Jonga iSikhokelo soMsebenzisi wePro Umqambi (ctri4.co/cpro-ug) ngeenkcukacha.
Iinkcukacha
| Inombolo yomzekelo | C4-C.41-1/7 |
| Uqhagamshelwano | |
| Uthungelwano | I-Ethernet-10/100BoseT iyahambelana (ifuneka kulungiselelo lwesilawuli) |
| Zigboo Pro | 80215. |
| I-antenna yeZigboe | Wrest yangaphandle ° isinxibelelanisi SMA |
| Izibuko le-USB | 2 USB 2.0 izibuko-500mA |
| Uthotho ngaphandle | I-1 isiriyeli ngaphandle kwezibuko le-RJ45 (RS-232) |
| Z-Amaza | I-slot ye-2-Wave edibeneyo yamkela iimodyuli ze-Control4 2-Wave (zithengiswa ngokwahlukeneyo) |
| Iinkonzo zomculo | Ifuna i-Triad One kwimveliso yomsindo. Ayixhasi iSpotty Connect. Ibhulorho yeShari, okanye uMculo wam wokuskena. |
| Amandla | |
| Iimfuno zamandla | I-5V DC 3h, unikezelo lwamandla lwangaphandle lubandakanyiwe |
| Ukunikezwa Amandla | Umbane we-AC wamkela i-100-240V II 50-60 Hz (0 5A) |
| IIFO | 802 iqashiso (<13W) |
| Ukutya umbane | Ubuninzi be-15W (51 BTU ngeyure) |
| Iintlobo ngeentlobo | |
| Ubushushu bokusebenza | 3V – 104′ F (0″ – 40′ C) |
| Ubushushu bokugcina | 4′ – 156. F (-20′ – 70′ C) |
| Imilinganiselo (L x W x H) | 5.5° k 5.5* k 125′ (14 .14 k 3.8 cm) |
| Ubunzima | 0.65 Il> (0.3 kg) |
| Ubunzima bokuthumela | 1.5 lb (0.68kg) |
Izibonelelo ezongezelelweyo
Ezi zibonelelo zilandelayo ziyafumaneka ukuze ufumane inkxaso engaphezulu.
- Control4 Knowledgebase: kb.control4.com
- IiForam zeDeller: iiforum.control4.com
- Control4 Inkxaso yobuGcisa: umthengisi.control4.com/dealer/support
- Ulawulo4 webindawo: www.control4.com
- Amaxwebhu oMqambi wePro kuncedo lwe-intanethi okanye ifomathi yePOF ekhoyo kwiPortal yomthengisi phantsi kweNkxaso: ctrl4.co/docs
- Uxwebhu lweZ-Wave: ctri4.co/z-wave
Ngaphambili view
Imo ye-LED-Imo ye-RGB ye-LED inika ingxelo yobume benkqubo. Jonga "Ukusombulula ingxaki" kolu xwebhu ngolwazi lobume be-LED.
Izibuko le-B Z-Wave—Isigqubuthelo seplastiki esisuswayo phezu kwesilawuli esinezibuko le-Z-Wave ngaphantsi kwemodyuli ye-Control4 Z-Wave.
Emva view
I-ZigBee-Isidibanisi se-eriyali yangaphandle yerediyo yeZigBee.
B Isibuko samandla—Uqhagamshelwano lwaMandla kubonelelo lwangaphandle lwamandla.
C ETHERNET (PoE)—RJ-45 port for 10/100Basel Ethernet network connection. Uqhagamshelo lwenethiwekhi olusetyenziselwa uqwalaselo kunye nolawulo lwesixhobo. Ixhasa i-PoE.
D SERIAL—R)-45 izibuko lonxibelelwano olulandelelanayo. Ingasetyenziselwa unxibelelwano lwe-RS-232 kulawulo lwesixhobo.
I-E USB-Amazibuko amabini e-USB 2.0 kwiidrive ze-USB zangaphandle (umzekelo, izixhobo ezifomatiweyo ze-FAT32). Jonga "Ukumisela izixhobo zokugcina zangaphandle" kolu xwebhu.
F ID / RESET amaqhosha-Amaqhosha asetyenziselwa ukuchonga isixhobo kwiComposer Pro kunye nokuseta ngokutsha isilawuli. Jonga "Ukusombulula ingxaki" kolu xwebhu.
Ukufakela isilawuli
IiMfuneko:
- Qinisekisa ukuba inethiwekhi yasekhaya ikhona phambi kokuba uqalise ukuseta inkqubo.
- Uqhagamshelo lomoya kwinethiwekhi luyafuneka kulungiselelo lokuqala lomlawuli.
- Umlawuli ufuna uqhagamshelo lwenethiwekhi ukusebenzisa zonke iimpawu njengoko ziyilelwe.
Xa uqhagamshelwe, umlawuli unokunxibelelana nezinye izixhobo ze-IP ekhaya kwaye afikelele kuhlaziyo lwenkqubo ye-Control4. - Umqambi wesoftware yesoftware engu-2.10.0 okanye entsha iyafuneka kuqwalaselo.
Iinketho zokuxhoma:
- Eludongeni-Umlawuli unokuxhonywa eludongeni kusetyenziswa izikrufu. Susa iinyawo zerabha, ulinganise umgama phakathi kwazo, kwaye ufake izikrufu ezi-2 eludongeni ukuze iintloko zibe malunga ne-1/4 ukuya kwi-1/2 intshi ukusuka eludongeni. Beka imingxuma ngasemva kwesilawuli phezu kweentloko ezijijwayo kwaye utyibilikise isilawuli kwizikrufu.
- Umzila we-DIN-Umlawuli unokuxhonywa eludongeni usebenzisa icandelo lesiteshi sikaloliwe se-DIN. Khuphuka umzila eludongeni, uze udibanise umlawuli kumzila.
Kubalulekile: I-CA-1 ayilinganiswanga ukuba ifakwe ngaphakathi kwendawo yombane. Ufakelo lukaloliwe lwe-DIN- T4 lwenzelwe kuphela ukunyuswa kodonga okanye elinye icandelo le-DIN kaloliwe ngaphandle kwendawo yombane.
Ukuqhagamshela isilawuli
- Qhagamshela isilawuli kwinethiwekhi.
• I-Ethernet—Ukuqhagamshela usebenzisa uqhagamshelo lwe-Ethernet, qhaga intambo yedatha esuka kuqhagamshelwano lwenethiwekhi yasekhaya kwisilawuli se-Rj-45 port (ebhalwe “Ethernet*) kunye nesikhululo senethiwekhi eseludongeni okanye kwisitshixo senethiwekhi. - Qhoboshela izixhobo zothotho njengoko kuchaziwe "kuQhagamshela uthotho lwezibuko." I-port ye-serial isetyenziselwa kuphela ukulawula izixhobo zangaphandle, umlawuli kufuneka aqhagamshelwe phezu kwe-Ethernet ukuseta inkqubo ye-Control4.
- Qhagamshela naziphi na izixhobo zokugcina zangaphandle (i-USB) njengoko kuchaziwe "Ukumisela izixhobo zokugcina zangaphandle" kolu xwebhu.
- Qhagamshela intambo yombane kwizibuko lombane lomlawuli uze emva koko ungene kwindawo yombane (ukuba isilawuli asiqhutywa yi-PoE).
Idibanisa izibuko lothotho (ukhetho)
Umlawuli uquka enye i-Rj- 45 i-port ye-serial enokuthi iqwalasele i-RS-232 yonxibelelwano lwe-serial.
Olu lungelelwaniso lulandelayo lonxibelelwano luyaxhaswa:
• I-RS-232-Ulawulo lokuhamba kwe-Hardware, ukuya kuthi ga kwi-115,200 Kbps. (TXD, RXD, CTS, RTS, GND)
Ukuseta uthotho lwezibuko:
- Xhuma isixhobo se-serial kumlawuli usebenzisa ikhebula le-Cat5 / Cat6 kunye ne-RJ-45 ikhonkco.
Kubalulekile: Uthotho lwepinout yezibuko lulandela i-EIA/TIA-561 yothotho lwemigangatho yocingo. Sebenzisa iingcingo eziboniswe kulo mzobo ungezantsi. Uninzi lweentambo ze-0B9 ezakhelwe ngaphambili ukuya kwi-RS-232, kubandakanywa neentambo ze-network switch console, aziyi kusebenza. - Ukuqwalasela useto lothotho lwezibuko, yenza udibaniso olufanelekileyo kwiprojekthi yakho usebenzisa uMqambi Pro. Jonga uMqambi Pro User Guide ngeenkcukacha.
Phawula: Useto lothotho luchazwa kumqhubi wesixhobo kwi Umqambi. Izicwangciso zothotho (ibhaud, ukulingana, kunye nohlobo lwesiriyali sezibuko) ziqwalaselwe ngokuzenzekelayo xa umqhubi wesixhobo eqhagamshelwe kuMqambi Pro kuqhagamshelo lwezibuko lothotho lomqhubi we-CA-1.
Uthotho izibuko pinout kunye nengcebiso yocingo
RS-232 ipinaut
Amaxwebhu / Izibonelelo
 |
Control4 C4-CA1-V2 CA-1 Automation Controller [pdf] Isikhokelo soFakelo I-C4CA1V2, i-R33C4CA1V2, i-R33C4CA1V2, i-C4-CA1-V2, i-CA-1 i-Automation Controller, i-C4-CA1-V2 CA-1 i-Automation Controller, i-Automation Controller. |
