I-BAPI BLE i-Wireless Receiver kunye ne-Digital Output modules

Ngaphezuluview kunye nokuchonga

I-Wireless Receiver iqokelela idatha ukusuka kwi-28 ye-wireless sensors. Idatha ke idibaniswe kwi-BMS nge-BACnet MS / TP okanye imodyuli ye-Modbus RTU, imodyuli ye-BACnet ye-IP, okanye iimodyuli ze-analog output.
Imodyuli ye-BACnet MS / TP okanye i-Modbus RTU iguqula idatha yokudibanisa kwi-RS-485 inethiwekhi yonxibelelwano lwentsimi kwaye isekela ukuya kwi-28 ye-wireless sensors. Imodyuli ye-IP ye-BACnet iguqula idatha yokudibanisa kwinethiwekhi yonxibelelwano ye-ethernet ye-BMS kwaye ixhasa ukuya kwii-sensors ze-28 ezingenazintambo.

Cwangcisa iNyathelo 1 - Ukubhanqa iiSensors kuMfumani

Inkqubo yofakelo ifuna ukuba inzwa nganye engenazingcingo idityaniswe ne-receiver ehambelana nayo. Inkqubo yokudibanisa ilula kakhulu kwibhentshi yovavanyo kunye ne-sensor kunye nomamkeli kufuphi nomnye.

1. Khetha umenzi woluvo onqwenela ukudibanisa kumamkeli kwaye usebenzise amandla kuluvo. Jonga imanyuwali yayo ngemiyalelo eneenkcukacha.
2. Faka amandla kumamkeli. I-LED eluhlaza okwesibhakabhaka kwi-receiver iya kukhanya kwaye ihlale ikhanya.
3. Cinezela kwaye ubambe "Iqhosha leNkonzo" phezulu kommkeli de kube i-LED eluhlaza okwesibhakabhaka iqala ukudanyaza, emva koko ucinezele kwaye ukhulule "Iqhosha leNkonzo" kwinzwa (iFigs 2 & 3) ofuna ukuyidibanisa nomntu owamkelayo. Xa i-LED kwi-receiver ibuyela kwi-"On" eqinile kunye nohlaza "Inkonzo ye-LED" kwibhodi yesekethe ye-sensor ibhobhoza ngokukhawuleza kathathu, ukudibanisa kuphelile. Phinda le nkqubo kubo bonke abenzi boluvo.

Phawula: Ukudibanisa akufuneki kwiimodyuli zemveliso, kuphela abenzi boluvo kunye nomamkeli. Xa imodyuli ye-BACnet ye-MS / TP okanye ye-Modbus RTU, okanye imodyuli ye-BACnet ye-IP ixhunyiwe kumamkeli, iimodyuli ziya "Ukuzifumanisa ngokuzenzekelayo" zonke iinzwa ezidibaniswe nommkeli.

Cwangcisa iNyathelo lesi-2-UkuNyuka kunye nokuBeka i-antenna

I-eriyali inesiseko sozibuthe sokuxhoma. Nangona umamkeli unokufumaneka ngaphakathi kwendawo ebiyelweyo yentsimbi, i-eriyali kufuneka ibe ngaphandle kwendawo ebiyelweyo. Kufuneka kubekho umgca wokubona ongeyiyo owentsimbi ukusuka kuzo zonke iinzwakazi ukuya kwi-eriyali. Umgca owamkelekileyo wokubona uquka iindonga ezenziwe ngomthi, ilitye leshidi okanye udaka olune-lath engeyiyo intsimbi. Ukuqhelaniswa kwe-antenna (ethe tyaba okanye ethe nkqo) nayo iya kuchaphazela ukusebenza kwaye iyahluka ngokusetyenziswa. Ukuxhoma i-eriyali kumphezulu wesinyithi kuya kunqumla ulwamkelo emva komphezulu. Iifestile ezikhenkcezayo zinokuvalela ukungena kwakhona. Umtya owenziwe ngomthi okanye weplastiki odityaniswe kumqadi wesilingi wenza intaba enkulu. I-eriyali inokuxhonywa kuyo nayiphi na isilingi kusetyenziswa ifayibha okanye iplastiki twine. Musa ukusebenzisa ucingo ukuxhoma, kwaye musa ukusebenzisa imitya yesinyithi enemingxuma, ebizwa ngokuba yi tape ye-plumbers.

Cwangcisa iNyathelo lesi-3 – Ukunyuswa koMfumani kunye neeModyuli zokuPhuma

Ummkeli kunye neemodyuli eziphumayo zinokuba yi-snaptrack, i-DIN Rail okanye i-surface mounted. Umamkeli ngamnye unokwamkela ukuya kuthi ga kwiimodyuli ze-127. Qala ngomamkeli ekhohlo kude, emva koko uqhoboshele ngokukhuselekileyo imodyuli nganye yemveliso ngasekunene. Tyhila iitebhu zokunyusela eziblowu ukuze unyuke nge-2.75” snaptrack (Fig 4). Tyhila ngaphandle iithebhu zokunyusela zeDIN Rail (Fig 5) Bamba ihuku yokunyusela ye-EZ kumda wesiporo seDIN (Fig 6) kwaye ujikethe endaweni. Tyhila ngaphandle iithebhu ezixhomayo ukulungiselela ukuxhonywa komphezulu omnye kwithebhu nganye usebenzisa i-Fig enye.

Ukuba iimodyuli zakho zemveliso azinakungena kumgca omnye othe ngqo ngenxa yendawo enyiniweyo, nyusa umtya wesibini weemodyuli ngaphezulu okanye ngaphantsi. Xhuma iingcingo ukusuka kwicala lasekunene lomtya wokuqala weemodyuli ukuya kwicala lasekhohlo lomtya wesibini weemodyuli. Olu lungelelwaniso lufuna enye okanye ezininzi eziPluggable Terminal Block Connector Kits (BA/AOM-CONN) ukwenzela ukupheliswa kocingo olongezelelweyo kwicala lasekhohlo nasekunene leemodyuli zemveliso. Ikhithi nganye ibandakanya isethi enye yezihlanganisi ezi-4.

Cwangcisa iNyathelo lesi-4 – Ukuphelisa

Umamkeli kunye neemodyuli eziphumayo ziplagi kwaye zinokudityaniswa kumtya oqhotyoshelweyo njengoko kuboniswe ngakwesokudla. Amandla eemodyuli zemveliso anikezelwe ngumamkeli kolu qwalaselo. Ukuba iimodyuli zinikwe amandla ngokwahlukileyo kunokuba zivela kummkeli (njengoko kuboniswe ngezantsi), ngoko kufuneka zibe ne-15 kwi-24VDC. Qinisekisa ukuba unikezela ngamandla awoneleyo kuzo zonke izixhobo ezisebhasini.

Phawula: Umamkeli unakho ukufikelela kwiimodyuli ze-127 ezahlukeneyo zemveliso; nangona kunjalo, iimodyuli ezili-10 kuphela ezinokunikwa amandla ngokuthe ngqo kumamkeli. Ukongeza iimodyuli ezongezelelweyo, landela "Ukwandiswa kweNethiwekhi yothotho" izalathiso kwiphepha lesi-4.

Cwangcisa iNyathelo lesi-5 – Isetingi zokuTshintsha umamkeli

Zonke iisetingi zoluvo zilawulwa kwaye zihlengahlengiswa ngummkeli ukuze zihambelane neemfuno zofakelo. Ezi zilungelelaniswa ngokutshintsha kwe-DIP phezulu kommkeli. Olu luseto lwazo ZONKE IIMVA ZOVAVANYO ezidityaniswe kulo mamkeli.

Sample Rate/Isithuba -Ixesha eliphakathi xa inzwa ivuka kwaye ithatha ukufunda. Amaxabiso akhoyo 30 sec, 1 min, 3 min, okanye 5 min. Ireyithi yokuThutha / iIthuba - Ixesha eliphakathi xa inzwa idlulisela ukufundwa kumamkeli. Amaxabiso akhoyo yi-1, 5, 10, okanye imizuzu engama-30.

Ubushushu beDelta – Utshintsho lobushushu phakathi njengokoampI-le kunye nokuhanjiswa kokugqibela okuya kubangela ukuba inzwa igqithise isithuba sokudlulisa kwaye ngokukhawuleza ithumele onke amaxabiso kumamkeli. Amaxabiso akhoyo yi-1 okanye 3 °F okanye °C.

Ukufuma kweDelta – Ukutshintsha ukufuma phakathi njengeampI-le kunye nokuhanjiswa kokugqibela okuya kubangela ukuba inzwa igqithise isithuba sokudlulisa kwaye ngokukhawuleza ithumele onke amaxabiso kumamkeli. Amaxabiso akhoyo yi-3 okanye 5 %RH.

Cwangcisa iNyathelo lesi-6 – uLungiselelo lweZincedisi

Uqwalaselo olusetyenziswayo lweemodyuli zemveliso ziyafumaneka ukuze zikhutshelwe kwi-BAPI webindawo kwi www.bapihvac.com. Yiya kwiphepha lemveliso yemodyuli kwaye ucofe kwikhonkco elinikiweyo ukufikelela kwizinto eziluncedo.

Ukwandiswa kweNethiwekhi yothotho phakathi koMfumani kunye neeModyuli okanye ukuPhathwa kwamaQela oLongezelelweyo weeModyuli
Iimodyuli eziphumayo zinokunyuswa ukuya kwii-4,000 ezinyaweni (i-1,200 yeemitha) kude nommkeli usebenzisa uqwalaselo oluboniswe kwi-Fig 11. Ubude obupheleleyo bazo zonke iintambo ezikhuselekileyo, eziphothiweyo eziboniswe kwi-Fig. Ukuba umgama osuka kumamkeli ukuya kwiqela leemodyuli zemveliso mkhulu kuneemitha ezili-100 (iimitha ezingama-30), unikeze unikezelo lwamandla olwahlukileyo okanye umbane.tagi-e converter (efana ne-BAPI's VC350A EZ) yelo qela leemodyuli zemveliso. Kwakhona, umamkeli ngamnye unokwamkela ukuya kuthi ga kwi-127 yeemodyuli zemveliso ezahlukeneyo; nangona kunjalo, iimodyuli ezili-10 kuphela ezinokunikwa amandla ngokuthe ngqo kumamkeli. Landela izalathiso eziboniswe apha ukongeza iimodyuli ezongezelelweyo.

Ukuseta kwakhona iSensom, uMfumani okanye iModyuli yokuPhuma

Ii-Sensors, abamkeli kunye neemodyuli zemveliso zihlala zidityanisiwe xa amandla ephazamisekile okanye iibhetri zisusiwe. Ukuqhawula amabhondi phakathi kwabo, iiyunithi kufuneka zisetwe ngokutsha njengoko kuchaziwe ngezantsi:

UKUSETA KHONA IVANYO
Cinezela kwaye ubambe "Iqhosha leNkonzo" kwinzwa malunga nemizuzwana engama-30. Ngexesha laloo mizuzwana ye-30, i-LED eluhlaza iya kucima imizuzwana emi-5, emva koko idanyaze kancinci, emva koko iqalise ukudanyaza ngokukhawuleza. Xa ukudanyaza ngokukhawuleza kuyeka, ukuseta kwakhona kugqityiwe. Inzwa ngoku inokudityaniswa kumamkeli omtsha. Izixhobo zoluvo eziye zafunyanwa ngaphambili ziiModyuli zeDigital Output akusayi kufuneka ukuba ziphinde zifunyenwe.

UKUSETSHA KWAKHONA IMODYULI EZIPHUMAYO
Cinezela kwaye ubambe "Iqhosha leNkonzo" phezulu kwiyunithi ye-10 imizuzwana - i-LED iya kuhamba iqinile imizuzwana ye-2 kwaye yonke i-BACnet, i-Ethernet, kunye ne-Serial Settings iya kususwa. Ukubamba iqhosha lenkonzo imizuzwana eyongezelelweyo ye-20, i-LED iya kuhamba ngokuqinileyo imizuzwana emi-4 kwaye zonke izinto zenzwa ziya kucinywa.

UKUSETHA KWAKHONA I-RECEIVER
Cinezela kwaye ubambe "Iqhosha leNkonzo" kwinzwa malunga nemizuzwana engama-20. Ngexesha laloo mizuzwana ye-20, i-LED eluhlaza okwesibhakabhaka iya kudanyaza kancinci, emva koko iqalise ukudanyaza ngokukhawuleza. Xa ukudanyaza ngokukhawuleza kuyeka kwaye kubuyela kublowu oqinileyo, ukuseta kwakhona kugqityiwe. Iyunithi ngoku inokudityaniswa kwakhona kwiimodyuli zemveliso.

Isilumkiso! Ukusetha kwakhona umamkeli kuya kuqhawula amabhondi phakathi kommkeli kunye nabo bonke abenzi boluvo. Abenzi boluvo baya kufuna ukudityaniswa kwakhona kunye nomamkeli.

Ukuba imodyuli yesiphumo ayifumani idatha kwi-sensor edibeneyo yemizuzu ye-35, imeko yempazamo iya kwenzeka ukubonisa oku. Ukuba oku kuyenzeka, iimodyuli zemveliso nganye ziya kusabela njengoko kuchaziwe ngezantsi. Nje ukuba ukuhanjiswa kufunyenwe, iimodyuli zemveliso ziya kubuyela ekusebenzeni okuqhelekileyo kwimizuzwana emi-5 okanye ngaphantsi.

• BACnet IP Modyuli: Into nganye ye-sensor inendawo ethi "Imeko yeSigigaba", eya kujika isuka kwisimo esiQhelekileyo ukuya kwiFault state, kwaye kukho ipropathi ethi "Reliability", eya kubonisa "Ukungaphumeleli koNxibelelwano."
• I-BACnet MS/TP okanye iModyuli yeModbus RTU: Xa imodyuli ikwimo ye-Modbus, kukho irejista yephutha kwinto nganye yoluvo, kwaye ixabiso lerejista liya kuba yi-1 xa liphelile. Xa imodyuli ikwimo ye-BACnet, into nganye ye-sensor inendawo ethi "Imeko yeNkcazo" eya kujika kwi-Normal state ukuya kwi-Fault state, kwaye kukho ipropathi ethi "Ukuthembeka", eya kubonisa "Ukungaphumeleli koNxibelelwano".

Wireless System Diagnostics

Iingxaki ezinokwenzeka / izisombululo ezinokwenzeka
Ufundo olusuka kwinzwa ayilunganga okanye kumda walo ophantsi:

• Cinezela iqhosha le-sensor "Inkonzo" (njengoko kuchazwe kwicandelo elithi "Ukubhanqa iiSensors kwi-Receiver" kwi-pg 1) kwaye uqinisekise ukuba i-LED eluhlaza kwibhodi yesiphaluka iyadanyaza. Ukuba akunjalo, buyisela iibhetri.
• Cinezela iqhosha lenzwa ye "Inkonzo" kwaye uqinisekise ukuba ii-LEDs kumamkeli kunye nemodyuli yokuphuma iyaqhwanyaza. Ukuba abakwenzi oko, zama ukuseta kwakhona emva koko kwaye uphinde ubhanqe inzwa kummkeli.
• Khangela iingcingo ezifanelekileyo kunye noqhagamshelwano olusuka kumamkeli ukuya kwiimodyuli zemveliso.

I-LED kwimodyuli yokuphuma idanyaza ngokukhawuleza:

• Oku kwenzeka kuphela kwimpazamo yehardware. Zama ukukhwela ibhayisekile isixhobo okanye uqhagamshelane ne-BAPI ngoncedo olongezelelweyo.

Iinkcukacha

Umamkeli

• Supply Power: I-15 ukuya kwi-24 VDC (ukusuka kwi-half-wave elungisiweyo yokubonelela)
• Ukutya umbane: 30 mA @ 24 VDC
• Ukhuseleko lwangokuamandla: 200 mA
• Umthamo/Iyunithi: Ukuya kuma-28 abenzi boluvo | Ukuya kuthi ga kwi-127 yeemodyuli ezahlukeneyo zemveliso
• Umgama woKwamkela: Iyahluka ngokwesicelo*
• Ukuphindaphinda: 2.4 GHz (iBluetooth Low Energy)
• Umgama weCable yebhasi: 4,000 iinyawo (1,200 yeemitha)

Uluhlu lokuSebenza kokusiNgqongileyo

• Temp: 32 ukuya 140°F (0 ukuya 60°C)
• Ukufuma: 5 ukuya 95% RH non-condensing
• Izinto ezivalelekileyo & Ukukala: ABS Plastiki, UL94 V-0 (Usetyenziso lwangaphakathi kuphela)
• Iarhente: I-RoHS / Iqulethe i-ID yeFCC: QOQGM210P / IC: 5123A-GM210P
  • Uluhlu lwe-in-building luxhomekeke kwizithintelo ezifana nefenitshala kunye neendonga kunye nobuninzi bezo zixhobo. Kwiindawo ezivulekileyo ezibanzi, umgama unokuba mkhulu; kwiindawo ezixineneyo, umgama unokuba ngaphantsi.

BACnet IP Modyuli

• Supply Power: I-15 ukuya kwi-24 VDC (ukusuka kwi-half-wave elungisiweyo unikezelo), okanye inikwe amandla nge-receiver ukuba ixhunyiwe.
• Qaphela kuMandla: Ukuba unika amandla imodyuli ngokwahlukeneyo, sebenzisa kuphela unikezelo lwamandla ngefuse okanye into enyisayo yangoku. Uhlobo oluchanekileyo lonikezelo (i-DC edibeneyo, i-current-limited, okanye i-wireless receiver kunye nokukhusela) ixhomekeke kumfaki.
• Ukutya umbane: 40 mA max @ 24 VDC
• Ixesha loNxibelelwano olulahlekileyo: imizuzu 35
• Umgangatho we-Ethernet: 10/100BASE-TX

Uluhlu lokuSebenza kokusiNgqongileyo:

• Temp: 32 ukuya 140°F (0 ukuya 60°C)
• Ukufuma: 5 ukuya 95% RH non-condensing
• Khankanya. Izinto eziphathekayo & Ukala: ABS Plastiki, UL94 V-0 (Usetyenziso lwangaphakathi kuphela)
• I-ArhenteI-RoHS (CE ilindile)

I-BACnet MS/TP okanye iModyuli yeModbus RTU

• Supply Power: I-15 ukuya kwi-24 VDC (ukusuka kwi-half-wave elungisiweyo unikezelo), okanye inikwe amandla nge-receiver ukuba ixhunyiwe.
• Qaphela kuMandla: Ukuba unika amandla imodyuli ngokwahlukeneyo, sebenzisa kuphela unikezelo lwamandla ngefuse okanye uphawu lwangoku lomda. Uhlobo oluchanekileyo lonikezelo (i-DC edibeneyo, i-current-limited, okanye i-wireless receiver kunye nokukhusela) ixhomekeke kumfaki.
• Ukutya umbane: 40 mA max @ 24 VDC
• Ixesha loNxibelelwano olulahlekileyo: imizuzu 35
• Umgama weCable yebhasi: 4,000 iinyawo (1,200 yeemitha)

Uluhlu lokuSebenza kokusiNgqongileyo

• Temp: 32 ukuya 140°F (0 ukuya 60°C)
• Ukufuma: 5 ukuya 95% RH non-condensing
• Khankanya. Izinto eziphathekayo & Ukala: ABS Plastiki, UL94 V-0 (Usetyenziso lwangaphakathi kuphela)
• I-ArhenteI-RoHS (CE ilindile)

Izatifikethi ze-Arhente

RoHS / Ine-ID yeFCC: QOQGM210P / IC: 5123A-GM210 / uGunyaziwe woNxibelelwano oZimeleyo waseMzantsi Afrika Esi sixhobo sithobela iNxalenye ye-15 yeMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Naluphi na utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo yi-BAPI lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo. Esi sixhobo sithobelana ne-Industry Canada (IC) yelayisenisi-imigangatho ye-RSS ekhululiwe. Ukusebenza kuxhomekeke kule miqathango mibini ilandelayo. Esi sixhobo sisenokungabangeli ukuphazamiseka. Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.

I-BACnet MS/TP okanye iModyuli yoLungiselelo lweModyuli ye-Modbus
Phambi kokuqwalasela imodyuli, zonke abenzi boluvo kwinkqubo yakho kufuneka zidityaniswe nomamkeli njengoko kuchaziwe ngaphambili kolu xwebhu lwemiyalelo. Imodyuli nayo kufuneka idityaniswe nomntu owamkelayo ixesha elide ngokwaneleyo ukuba ifumene ubuncinci ukuhanjiswa ukusuka kwi-sensors nganye.

Imodyuli kwi-BACnet MS/TP Mode

Ukuqwalasela isixhobo, landela la manyathelo angezantsi.

1. Vula isikhangeli kwikhompyuter yakho kwaye uye kwi-BACnet MS/TP okanye kwiModyuli yeModyuli yephepha kwi-BAPI. webindawo. Khuphela i.zip file kwaye ukhuphe imixholo.
2. Cofa kabini "BAPI.Uqwalaselo lweSixhobo. exe" file ukuqhuba usetyenziso.
3. Qhagamshela intambo ye-USB phakathi kwekhompyuter yakho kunye nesinxibelelanisi se-USB-C kwimodyuli. Idatha yesethingi yesixhobo iya kukhupha iWindow yeNgcaciso yeDivayisi yeSixhobo (Fig 1).
   Phawula: Imodyuli ayifuni ukuba inikwe amandla kuqwalaselo. Intambo ye-USB-C iya kunika amandla afunekayo.
4. Hlela amaxabiso kwicandelo loSeto lothotho lwefestile yoqwalaselo lweSixhobo yesicelo sakho. Khetha i-BACnet njengeProtokholi yeZiphumo kunye neCandelo leeSetingi zeProtocol ngezantsi kweSetingi zothotho ziya kuboniswa.
5. Cofa iiNdlela eziPhambili zokuvula ifestile yeeKhetho eziPhezulu (Fig 2). Cofa i Khetha into eyehlayo ukukhetha enye yezinto ezikhoyo zaloo sensor (Fig 3). Hlela iGama leNjongo kunye noTshintsho lweXabiso Delta imihlaba ukuba uyafunwa. Cofa Hambisa ukugcina utshintsho lwakho kuluvo ngaphambi kokukhetha umenzi olandelayo. Khetha Cima ukhetho lokususa naziphi na izinto.
6. Cofa Hambisa ukugcina utshintsho lwakho kuluvo ngaphambi kokukhetha into elandelayo.
7. Xa kugqityiwe ngento yokugqibela, cofa Ngenisa kwaye emva koko Vala ukubuyela kwifestile engundoqo.
8. Ukuba kukho naziphi na izicwangciso ezitshintshiweyo, nceda uqalise kwakhona isixhobo ngokunqakraza kwiqhosha lokuQalisa kwakhona iDivaysi phantsi kwesixhobo soqwalaselo, esiza kwenza umsebenzi wokujikeleza kwamandla kwaye usebenzise izicwangciso ezintsha.
9. Ubumbeko ngoku lugqityiwe ukuze ukwazi ukukhulula intambo ye-USB.

I-BACnet MS/TP okanye iModyuli yoLungiselelo lweModyuli ye-Modbus/TP iyaqhubeka...

Phambi kokuqwalasela imodyuli, zonke iisenzi zoluvo kwinkqubo yakho kufuneka zidityaniswe nomamkeli njengoko kuchaziwe ngaphambili kolu xwebhu lwemiyalelo. Imodyuli nayo kufuneka idityaniswe nomntu owamkelayo ixesha elide ngokwaneleyo ukuba ifumene ubuncinci ukuhanjiswa ukusuka kwi-sensors nganye.

Imodyuli kwiModi yeModbus RTU
Ukuqwalasela usetyenziso, landela la manyathelo angezantsi.

1. Vula isikhangeli kwikhompyuter yakho kwaye uye kwi-BACnet MS/TP okanye kwiModyuli yeModyuli yephepha kwi-BAPI. webindawo. Khuphela i.zip file kwaye ukhuphe imixholo.
2. Cofa kabini u-"BAPI.Device Configuration.exe.exe" file ukuqhuba usetyenziso.
3. Qhagamshela intambo ye-USB phakathi kwekhompyuter yakho kunye nesinxibelelanisi se-USB-C kwimodyuli. Idatha yesethingi yesixhobo iya kuveza iWindow yoLungiselelo lweSixhobo (Fig 4). Qaphela: Imodyuli ayifuni ukuba inikwe amandla kuqwalaselo. Intambo ye-USB-C iya kunika amandla afunekayo.
4. Hlela amaxabiso kwicandelo leeSetingi zothotho lweSixhobo seSisebenziso sefestile yoLwazi lwesicelo sakho. Khetha i-Modbus njengeProtokholi yeZiphumo kunye neqhosha lokukhuphela iMaphu yeModbus livela.
5. Xa usebenzisa i-Modbus RTU njengeprotocol yemveliso, kubalulekile ukukhuphela imephu ye-Modbus. Emva kokukhuphela, vula i-spreadsheet yemephu ye-Modbus ehamba kunye (Fig 5). Ungayinika igama ngokutsha i file njengoko ufuna okanye ugcine igama lokuqala. Nje ukuba uyigcine ifayile file, lonke ulwazi oluyimfuneko luya kufumaneka lula ukulungiselela ukuhlaziya iisetingi kwisilawuli sakho kunye ne-BMS.
6. Ukuba kukho naziphi na izicwangciso ezitshintshiweyo, nceda uqalise kwakhona isixhobo ngokunqakraza kwiqhosha lokuQalisa kwakhona iDivaysi phantsi kwesixhobo soqwalaselo, esiza kwenza umsebenzi wokujikeleza kwamandla kwaye usebenzise izicwangciso ezintsha.
7. Ngoku ungaqhawula intambo ye-USB.

I-BACnet IP Modyuli yokuSetyenziswa kweModyuli

Ukuqwalasela imodyuli, landela la manyathelo angezantsi.

1. Amandla emodyuli usebenzisa i-BLE Receiver.
2. Qhagamshela imodyuli usebenzisa i-Ethernet port kwinethiwekhi eneseva yeDHCP. Umncedisi we-DHCP uya kwabela idilesi ye-IP yaBucala kwimodyuli.
3. Sebenzisa isixhobo sokufumanisa i-BACnet okanye esifakwe kwisilawuli se-BMS ukufumana idilesi ye-IP yesixhobo. Ukungagqibeki kwefektri yojongano lweBACnet lusebenza kwi UDP port 47808. Vula a web umkhangeli zincwadi kwaye ungenise idilesi ye-IP ukufikelela kwisixhobo web ujongano. Kuya kufuneka ungene ngezi nkcukacha zilandelayo:
   • Igama lomsebenzisi: admin
   • Inombolo yokuvula: admin
4. Emva kokungena ngemvume, nceda wenze zonke iinguqu eziyimfuneko kwizicwangciso zenethiwekhi (umzobo 6), izicwangciso zesixhobo (umzobo 7), izicwangciso zezinto (umzobo 8) kunye neenkcukacha zomsebenzisi.
5. Ukuba ufuna ukuseta kwakhona imodyuli nceda ucinezele kwaye ubambe "Iqhosha leNkonzo" phezulu kweyunithi imizuzwana eyi-10, i-LED iya kuhamba ngokuqinileyo imizuzwana emi-2 kwaye zonke iisetingi zesixhobo ziya kucinywa. Ukubamba phantsi "Iqhosha leNkonzo" imizuzwana eyongezelelweyo ye-20, i-LED iya kuhamba ngokuqinileyo imizuzwana ye-4 kwaye zonke izinto zenzwa ziya kucinywa.

Ulwakhiwo lweeMveliso eziziSebenzisayo, i-Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA Umnxeba:+1-608-735-4800 • Ifeksi+1-608-735-4804 • I-imeyile:sales@bapihvac.com • Web:www.bapihvac.com

Imibuzo ebuzwa qho

Ngaba kufuneka ndidibanise iimodyuli zemveliso?

Hayi, ukubhanqa kufunwa kuphela abenzi boluvo kunye nabamkeli.Iimodyuli eziphumayo ziyakuFumana ngokuzenzekelayo iinzwa ezidityanisiweyo xa ziqhagamshelwe kumamkeli.

Amaxwebhu / Izibonelelo

I-BAPI BLE i-Wireless Receiver kunye ne-Digital Output modules [pdf] Isikhokelo soFakelo BAPI-Stat Quantum, BAPI-Box, BLE Wireless Receiver and Digital Output modules, BLE, Wireless Receiver and Digital Output modules, Digital Output Modules, Output Modules, iimodyuli

Iimbekiselo

• Incwadi yokusebenzisa