I-AUDIO ARRAY MD22-SMS-001 i-Audio Interface

INGCACISO YEMVELISO

I-AUDIO INTERFACE

Umyalelo woMsebenzi

1. IQHUBA LOKUFUMANA
   Iseta umthamo weJane okanye igalelo lomgca wesiginali enikezelwe kweli jelo. I-GAIN knob isetyenziselwa ukulungisa ubuntununtunu bomyalezo kunye nesignali yegalelo lomgca. Oku kuvumela umqondiso wangaphandle ukuba ulungelelaniswe kwinqanaba elifunekayo lolawulo lwangaphakathi.
2. I-impedance ephezulu [HI-Z] iqhosha lokutshintsha
   Ukudibanisa isiginci ngokuthe ngqo kwitafile yokuxuba ngaphandle kokusetyenziswa kwebhokisi ye-DI, cofa kuqala olu tshintsho; Emva koko qhagamshela imveliso yesiginci kwigalelo le-TRS yetshaneli. I-impedance yegalelo ephuculweyo iqinisekisa uxhulumaniso oluthe ngqo kunye nokunyaniseka okuphezulu.
3. I-MIC/LINE/XLR ujongano loNgeno
   Isetyenziselwa ukudibanisa imakrofoni, izixhobo zomculo okanye izixhobo zomsindo zangaphandle. Iijekhi ze-Multifunction jacks zixhasa zombini i-XLR kunye neeplagi zohlobo lwe-PHONE.
4. Isibane somqhubi wenqwelomoya
   Ukukhanya kwe-PK kubonisa ukuba isignali yomsindo kwitshaneli yomelele kakhulu. Ngeli xesha, inqanaba le-knob le-GAIN elihambelanayo kufuneka lithotywe de kube kucinywe ukukhanya kwe-PK. + 48V isibane samandla ephantom. Xa iswitshi yamandla ephantom ivuliwe, ukukhanya kwe +48V kuya kukhanya.
5. LOW CUT isihluzi sokuphumelela okuphezulu
   Ukuvula oku kusebenzisa isihluzo sokuphumelela okuphezulu esithomalalisa iifrikhwensi ukuya kuthi ga kwi-100Hz kwithambeka le-12 dB/octave.
6. MIX iqhina
   Lungisa ibhalansi yenqanaba phakathi kwegalelo lomqondiso kwi-jack ye- [MIC/LINE 1/2] kunye nomqondiso wesicelo. Eli qhosha lokulawula alichaphazeli umqondiso othunyelwe kwikhompyutha.
7. Ukutshintsha kwe-MONO
   Xa iswitshi ivuliwe, igalelo lophawu kwi [MIC/LINE 1/2] jekhi iya kuba yimveliso kuzo zombini ijekhi ye [MAON OUT L/R] kunye netshaneli yeUR yejekhi ye [IFONI]. Xa iswitshi sicinyiwe, igalelo lomqondiso kwi [MIC/LINE 1] jekhi iya kuba yimveliso kwijekhi ye [MAON OUT L] Igalelo lomqondiso kwi [MIC/LINE 2] jekhi iya kuba yimveliso kwi [MAIN OUT R ] jack.
   Kwijekhi ye-[IFONI], igalelo lomqondiso kwi- [MIC/LINE 1] jekhi iya kuba yimveliso kwiSitishi L; Igalelo lesiginali kwijekhi ye- [MIC/LINE 2] iya kuba yimveliso kumjelo we-R.
8. OUT iqhosha letshaneli eliphambili
   Isetyenziselwa ukunyenyisa umgangatho wemveliso yesignali kwi [MAIN OUT] socket.
9. IXELELA NGAMVA.
   Ukufakwa kwesandi kwikhadi lesandi kunye nesandi esidlalwa kwikhompyuter sixutywe kwi-stereo kwaye sithunyelwe kwikhompyuter. Olu seto lusetyenziswa ikakhulu kusasazo lwenethiwekhi.
10. AMANDLA
    Xa uqhagamshelwe kunikezelo lwaMANDLA, isalathisi samandla kumxube siya kukhanyisa.
11. I-PHONE port/i-headset knob
    I-headphone knob -Ukulungelelanisa umthamo we-headphone [PHONE] imveliso exhunywe kwi-socket. I-headphone jack - Isetyenziselwa ukudibanisa ii-headphones. Isokethi ixhasa iplagi yohlobo lwefowuni yestereo. Ukuba ufuna ukuqhagamshela i-headset okanye i-earplug ngeplagi encinci, nceda usebenzise [Isixhobo sokuguqula] ukuqhagamshela.
12. IZIPHUMO EZIPHAMBILI
    2 14″ (6.35 mm) iijacks zohlobo lwe-TRS, +10 inqanaba lemveliso ye-dBu (eguquguqukayo), elungeleleneyo ngombane. 14″ TRS (uqhagamshelo olulungeleleneyo) kunye ne-TS(uqhagamshelwano olungalinganiyo) iiplagi zohlobo lwejack ziyafumaneka.
13. Ukutshintsha amandla ePhantom
    Xa iswitshi yamandla ephantom ivuliwe, ukukhanya kwe +48V kuya kukhanya kwaye i-DC+48V phantom amandla aya kunikezelwa kwiplagi yeXLR.
    kwi [MIC/LINE] ijekhi yokufaka. Vula olu tshintsho xa usebenzisa i-condenser microphone efuna amandla e-phantom.

    IMIYALELO

    Ukuba amandla e-phantom awafuneki, qiniseka ukuba ukucima ukucinywa. Ukuthintela ingxolo kunye nomonakalo kumxube kunye nezixhobo zangaphandle, nceda uqaphele la manyathelo okhuseleko alandelayo:

    1. Qinisekisa ukuba olu tshintsho luvaliwe xa uqhagamshela izixhobo kwiitshaneli ezingawaxhasi amandla e-phantom.
    2. Cima iswitshi xa uqhagamshela okanye ukhulula intambo kwisitishi.
    3. Phambi kokuba uvule okanye ucime iswitshi, tsala ifader kwisitishi uye ezantsi.
14. OUT MINI
    Ijekhi ixhasa iiplagi ezincinci zeeseti zentloko okanye ii-earplugs.
15. I-SV DC(TYPE-C)
    • Iadaptha yamandla ye-USB yokudibanisa ukuhanjiswa kunye nentambo yedatha ye-TYPE-C isetyenziselwa ukunika amandla itafile yokulungisa.
      • Qaphela: Nceda ufunde ngononophelo izilumkiso zokhuseleko lwe-adaptha yamandla ye-USB kunye nentambo yedatha ye-TYPE-C oyisebenzisayo.
    • Iadaptha yamandla ye-USB kunye nomgangatho wentambo yedatha ye-TYPE-C: Umthamo wemvelisotage: 4.8V ukuba 5.2V
16. UMTHOMBO WAMANDLA Imveliso yangoku: 3A okanye ngaphezulu
    Tshintsha phakathi kweendlela ezahlukeneyo zoqhagamshelwano. Xa uxhulumaniso lwedatha lufuneka, tshintshela kwi-USB 2.0 ukuze imiqondiso evela kumxube inokudluliselwa phakathi kwePC, i-MAC, i-IOS, kunye nezinye izixhobo ze-Android.

Dibana no 

• Ukurekhodwa kweMobile / Ukuxuba
• Ikhaya / Isitudiyo seProjekthi

1. Ukuba isiginci sombane kunye ne-bass kufuneka idityaniswe ngokuthe ngqo kwi-port yegalelo letafile yokuxuba, sebenzisa ibhokisi ye-DI (ibhokisi ethe ngqo) isiginci. amp phakathi kwesixhobo kunye netafile yokuxuba.
2. Xa usebenzisa i-microphone ye-capacitor, vula i- +48V i-illusion power switch.

Amaxwebhu / Izibonelelo

I-AUDIO ARRAY MD22-SMS-001 i-Audio Interface [pdf] Incwadi Yomyalelo I-MD22-SMS-001 i-Audio Interface, i-MD22-SMS-001, i-Audio Interface, i-Interface

Iimbekiselo

• Incwadi yokusebenzisa