Arduino ABX00071 Nano 33 BLE Imodyuli
Iinkcukacha
- Igama lemveliso: Arduino Nano 33 BLE Rev2
- SKU: IABX00071
- Iprosesa: ICortex M4F isekwe kwiNordic nRF52480
- Im: I-BMI270 6-axis IMU (i-Accelerometer kunye neGyroscope), BMM150 3-axis IMU (iMagnetometer)
- Ukunxibelelana ngaphandle kwamacingo: Imodyuli ye-NINA B306 enenkxaso yerediyo ye-IEEE 802.15.4, Umsonto, Zigbee
- DC-DC Regulator: MP2322, igalelo voltage ukuya kuthi ga kwi-21V, ukusebenza kakuhle ngaphezu kwe-85% @12V
Imiyalelo yokusetyenziswa kwemveliso
Ukusebenza kweBhodi
Ukuqalisa ngeArduino Nano 33 BLE Rev2, landela la manyathelo:
- IDE: Qala ngokumisela i-Integrated Development Environment (IDE).
- Arduino Web Umhleli: Kungenjalo, ungasebenzisa Arduino Web Umhleli wenkqubo.
- Ifu leArduino IoT: Phonononga iindlela zokunxibelelana kwilifu kwiiprojekthi zakho ze-IoT.
- Sample Sketches: Fikelela kwimizobo eyakhiwe kwangaphambili yovavanyo olukhawulezayo kunye nokufunda.
- Izixhobo ze-Intanethi: Jonga kumaxwebhu e-intanethi kunye neeforam zoluntu ukuze ufumane inkxaso.
- UBuyiselo lweBhodi: Kwimeko yayo nayiphi na imiba, funda indlela yokubuyisela ibhodi yakho.
Izikhonkwane zoDibaniso
Qonda izihlanganisi ezahlukeneyo ebhodini:
- I-USB: Sebenzisa uqhagamshelo lwe-USB ukwenza inkqubo kunye namandla.
- Okubhalwe ngasentla kwekhasi: Qhagamshela izixhobo zangaphandle okanye amacandelo usebenzisa iiheader.
- Debug: Sebenzisa izibuko lokulungisa ingxaki kunye nokubeka iliso.
Ulwazi ngoomatshini
- Funda malunga neenkcukacha ezibonakalayo zebhodi:
- Ulwandlalo lweBhodi: Qonda imilinganiselo kunye nemingxuma yokukhwela yebhodi.
FAQ
- Q: Ngaba ndingasebenzisa imiqondiso ye-5V ngeArduino Nano 33 BLE Rev2?
- A: Hayi, ibhodi ixhasa kuphela i-3.3VI / Os kwaye ayinyamezeli i-5V. Ukuqhagamshela imiqondiso ye-5V ngokuthe ngqo kungonakalisa ibhodi.
- Q: Ndiyenza njani amandla iArduino Nano 33 BLE Rev2?
- A: Unganika amandla ibhodi nge-USB okanye iiheader. Ibhodi ayinayo itshaja yebhetri eyakhelweyo.
Inkcazo
I-Arduino Nano 33 BLE Rev2 * yimodyuli encinci ye-miniature enemodyuli ye-NINA B306, esekelwe kwi-Nordic nRF52480 kwaye iqulethe i-Cortex M4F. I-BMI270 kunye ne-BMM150 ngokudibeneyo zibonelela nge-IMU ye-9-axis. Imodyuli inokunyuswa njengecandelo le-DIP (xa unyusela iiheader zepin) okanye njengecandelo le-SMT, ukuyithengisa ngokuthe ngqo ngeepads ezidibeneyo.
Imveliso yeArduino Nano 33 BLE Rev2 inee-SKU ezimbini:
- Ngaphandle kweeheader (ABX00071)
- Ngeentloko (ABX00072)
Iindawo ekujoliswe kuzo
- Umenzi, uphuculo, usetyenziso lwe-IoT
Iimbonakalo
NINA B306 Imodyuli
- Iprosesa
- 64 MHz Arm® Cortex®-M4F (neFPU)
- 1 MB Flash + 256 KB RAM
I-Bluetooth® 5 yerediyo yeeprotocol ezininzi
- 2 Mbps
- CSA #2
- Izandiso zentengiso
- Uluhlu olude
- +8 dBm TX amandla
- -95 dBm ubuntununtunu
- 4.8 mA kwi-TX (0 dBm)
- 4.6 mA kwi-RX (1 Mbps)
- Ibhaluni edityanisiweyo ene-50 Ω isiphumo esiphela-nye
- IEEE 802.15.4 inkxaso yerediyo
- Umsonto
- Zigbee
Iiperipherals
- Isantya esipheleleyo 12 Mbps USB
- NFC-A tag
- Arm CryptoCell CC310 subsystem yokhuseleko
- QSPI/SPI/TWI/I²S/PDM/QDEC
- Isantya esiphezulu 32 MHz SPI
- I-Quad SPI interface 32 MHz
- I-EasyDMA yazo zonke ii-interfaces zedijithali
- I-12-bit 200 ksps ADC
- I-128-bit AES / ECB / CCM / AAR co-processor
I-BMI270 I-6-axis IMU (i-Accelerometer kunye neGyroscope)
- 16-bit
- I-3-axis accelerometer ene-±2g/±4g/±8g/±16g uluhlu
- I-3-axis gyroscope ene-±125dps/±250dps/±500dps/±1000dps/±2000dps uluhlu
BMM150 3-axis IMU (Magnetometer)
- I-3-axis digital geomagnetic sensor
- 0.3μT isisombululo
- ±1300μT (x,y-axis), ±2500μT (z-axis)
MP2322 DC-DC
- Ulawula igalelo voltage ukusuka ukuya kwi-21V kunye nobuncinci be-65% ukusebenza kakuhle @umthwalo omncinci
- Ngaphezulu kwe-85% esebenzayo @12V
Ibhodi
Njengazo zonke iibhodi zeNano form factor, iNano 33 BLE Rev2 ayinayo itshaja yebhetri kodwa inokunikwa amandla nge-USB okanye ngeeheader.
PHAWULA: I-Arduino Nano 33 BLE Rev2 ixhasa kuphela i-3.3VI / Os kwaye AKUKHO ukunyamezela kwe-5V ngoko ke nceda uqinisekise ukuba awuqhagamshelani ngqo neempawu ze-5V kule bhodi okanye iya konakala. Kwakhona, ngokuchaseneyo neebhodi ze-Arduino Nano ezixhasa ukusebenza kwe-5V, iphini ye-5V ayiboneleli ngevolthi.tage kodwa iqhagamshelwe, nge-jumper, kwigalelo lamandla e-USB.
Amanqaku
IiMeko zokuSebenza eziCetyisiweyo
| Uphawu | Inkcazo | Min | Max |
| Imida yogcino yobushushu yebhodi yonke: | -40 °C ( 40 °F) | 85°C ( 185 °F) |
Ukutya umbane
| Uphawu | Inkcazo | Min | Chwetheza | Max | Iyunithi |
| PBL | Ukusetyenziswa kwamandla kunye ne-loop exakekile | TBC | mW | ||
| PLP | Ukusetyenziswa kwamandla kwimowudi yamandla aphantsi | TBC | mW | ||
| PMAX | UkuSetyenziswa kwamandla aphezulu | TBC | mW |
Umsebenzi oPhezuluview
I-Topology yeBhodi
Phezulu
| Ref. | Inkcazo | Ref. | Inkcazo |
| U1 | I-NINA-B306 Imodyuli yeBluetooth® Amandla aphantsi 5.0 Imodyuli | U6 | MP2322GQH Inyathelo lokuguqulela phantsi |
| U2 | I-BMI270 yoluvo lwe-IMU | PB1 | IT-1185AP1C-160G-GTR Cofa iqhosha |
| U7 | BMM150 Magnetometer IC | DL1 | Led L |
Ezantsi
| Ref. | Inkcazo | Ref. | Inkcazo |
| SJ1 | VUSB Jumper | SJ2 | D7 Jumper |
| Ref. | Inkcazo | Ref. | Inkcazo |
| SJ3 | 3v3 Umtsi | SJ4 | D8 Jumper |
Iprosesa
Eyona Prosesa yiArm® Cortex®-M4F ebaleka ukuya kuthi ga kwi-64MHz. Uninzi lwezikhonkwane zalo zixhunyiwe kwii-headers zangaphandle nangona kunjalo ezinye zigcinelwe unxibelelwano lwangaphakathi kunye nemodyuli engenazintambo kunye nebhodi yangaphakathi ye-I2C peripherals (IMU kunye ne-Crypto).
PHAWULA: Ngokuchaseneyo nezinye iibhodi ze-Arduino Nano, izikhonkwane ze-A4 kunye ne-A5 zine-internal pull-up kwaye zingagqibekanga zisetyenziswe njenge-I2C Bus ngoko ukusetyenziswa njengamagalelo e-analog akukhuthazwa.
IMU
I-Arduino Nano 33 BLE Rev2 ibonelela ngezakhono ze-IMU nge-9-axis, ngokudibanisa i-BMI270 kunye ne-BMM150 ICs. I-BMI270 ibandakanya zombini i-gyroscope ene-axis-three-axis kunye ne-axis-axis accelerometer, ngelixa i-BMM150 ikwazi ukuva iinguqu zemagnethi kuyo yomithathu imilinganiselo. Ulwazi olufunyenweyo lunokusetyenziselwa ukulinganisa iiparamitha zentshukumo ekrwada ngokunjalo nokufunda koomatshini.
Umthi wamandla
Ibhodi inokunikwa amandla nge-USB connector, VIN okanye VUSB izikhonkwane kwi headers.
PHAWULA: Ekubeni i-VUSB isondla i-VIN nge-Schottky diode kunye nomlawuli we-DC-DC okhankanyiweyo ubuncinane bomthamo wegalelo.tage yi 4.5V eyona volthi mincinci yonikezelotage ukusuka kwi-USB kufuneka inyuswe ibe yivoltage kuluhlu oluphakathi kwe-4.8V ukuya kwi-4.96V ngokuxhomekeke kumbane ozotywayo.
Umzobo weBhloko
Ukusebenza kweBhodi
Ukuqalisa – IDE
Ukuba ufuna ukucwangcisa iArduino Nano 33 BLE Rev2 ngelixa ungaxhunyiwe kwi-intanethi kufuneka ufake i-Arduino Desktop IDE [1] Ukuqhagamshela iArduino Nano 33 BLE Rev2 kwikhompyuter yakho, uya kudinga intambo ye-USB yeMicro-B. Oku kunika amandla ebhodini, njengoko kuboniswe yi-LED.
Ukuqalisa - Arduino Web Umhleli
- Zonke iibhodi zeArduino, kubandakanywa nale, zisebenza ngaphandle kwebhokisi kwi-Arduino Web Umhleli, ngokufaka nje iplagi elula.
- IArduino Web Umhleli ubanjwa kwi-intanethi, ke ngoko iya kuhlala isexesheni ngeempawu zamva nje kunye nenkxaso yazo zonke iibhodi. Landela ukuqalisa ukubhalwa kweekhowudi kwisikhangeli kwaye ulayishe imizobo yakho ebhodini yakho.
Ukuqalisa-i-Arduino IoT Cloud
Zonke iimveliso ze-Arduino IoT-enabled zixhaswa kwi-Arduino IoT Cloud evumela ukuba ungene ngemvume, igrafu kwaye uhlalutye idatha yenzwa, uqalise iziganeko, kwaye wenze ngokuzenzekelayo ikhaya lakho okanye ishishini.
Sample Sketches
Sample mizobo yeArduino Nano 33 BLE Rev2 inokufumaneka nokuba ku “Eksamples" kwimenyu ye-Arduino IDE okanye kwicandelo elithi "Uxwebhu" lweArduino Pro webindawo.
Izixhobo ezikwi-Intanethi
Ngoku ukuba udlule kwiziseko zezinto onokuthi uzenze ngebhodi ungaphonononga amathuba angapheliyo abonelelayo ngokujonga iiprojekthi ezinomdla kwiProjekthiHub, iReference yeThala leeNcwadi leArduino kunye nevenkile ekwi-intanethi apho uya kuba nakho ukuncedisana nebhodi yakho ngezoluvo. , ii-activators kunye nokunye.
UkuBuyiselwa kweBhodi
Zonke iibhodi zeArduino zine-bootloader eyakhelwe-ngaphakathi evumela ukuba idanyaze ibhodi nge-USB. Kwimeko apho umzobo utshixa iprosesa kwaye ibhodi ayifumaneki kwakhona nge-USB kunokwenzeka ukuba ungene kwimowudi ye-bootloader ngokucofa kabini iqhosha lokuseta kwakhona emva kokunika amandla ibhodi.
Izikhonkwane zoDibaniso
i-USB
| Iphini | Umsebenzi | Uhlobo | Inkcazo |
| 1 | I-VUSB | Amandla | Igalelo loBonelelo lwaMandla. Ukuba ibhodi inikwe amandla nge-VUSB ukusuka kwisihloko esi siPhumo (1) |
| 2 | D- | Umahluko | Idatha yokwahluka kwe-USB- |
| 3 | D+ | Umahluko | Idatha yokwahluka kwe-USB + |
| 4 | ID | I-Analog | Khetha umsebenzi womamkeli/weSixhobo |
| 5 | GND | Amandla | Umhlaba wamandla |
Iiheader
Ibhodi iveza iziqhagamshelo ezimbini ze-15-pin ezinokudityaniswa kunye neeheader ze-pin okanye zithengiswe nge-casellated vias.
| Iphini | Umsebenzi | Uhlobo | Inkcazo |
| 1 | D13 | Idijithali | GPIO |
| 2 | +3V3 | Ukuphuma kwamandla | Imveliso yamandla eveliswa ngaphakathi kwizixhobo zangaphandle |
| 3 | I-AREF | I-Analog | Isalathiso seAnalog; ingasetyenziswa njenge GPIO |
| 4 | A0/DAC0 | I-Analog | I-ADC in/DAC iphumile; ingasetyenziswa njenge GPIO |
| 5 | A1 | I-Analog | I-ADC ngaphakathi; ingasetyenziswa njenge GPIO |
| 6 | A2 | I-Analog | I-ADC ngaphakathi; ingasetyenziswa njenge GPIO |
| 7 | A3 | I-Analog | I-ADC ngaphakathi; ingasetyenziswa njenge GPIO |
| 8 | A4/SDA | I-Analog | I-ADC ngaphakathi; I2C SDA; Ingasetyenziswa njenge GPIO (1) |
| 9 | A5/SCL | I-Analog | I-ADC ngaphakathi; I-I2C SCL; Ingasetyenziswa njenge GPIO (1) |
| 10 | A6 | I-Analog | I-ADC ngaphakathi; ingasetyenziswa njenge GPIO |
| 11 | A7 | I-Analog | I-ADC ngaphakathi; ingasetyenziswa njenge GPIO |
| 12 | I-VUSB | Amandla Ngaphakathi/Ngaphandle | Ngokwesiqhelo iNC; inokudityaniswa kwiphini ye-VUSB yesidibanisi se-USB ngokufutshane i-jumper |
| 13 | RST | Digital In | Ungeniso lokusetha ngokutsha olusebenzayo olusezantsi (iphindiwe yephini 18) |
| 14 | GND | Amandla | Umhlaba wamandla |
| 15 | VIN | Amandla Angaphakathi | Igalelo laMandla eVin |
| 16 | TX | Idijithali | UART TX; ingasetyenziswa njenge GPIO |
| 17 | RX | Idijithali | UART RX; ingasetyenziswa njenge GPIO |
| 18 | RST | Idijithali | Ungeniso lokusetha ngokutsha olusebenzayo olusezantsi (iphindiwe yephini 13) |
| 19 | GND | Amandla | Umhlaba wamandla |
| 20 | D2 | Idijithali | GPIO |
| 21 | D3/PWM | Idijithali | GPIO; ingasetyenziswa njenge PWM |
| 22 | D4 | Idijithali | GPIO |
| 23 | D5/PWM | Idijithali | GPIO; ingasetyenziswa njenge PWM |
| 24 | D6/PWM | Idijithali | I-GPIO ingasetyenziswa njenge-PWM |
| 25 | D7 | Idijithali | GPIO |
| 26 | D8 | Idijithali | GPIO |
| 27 | D9/PWM | Idijithali | GPIO; ingasetyenziswa njenge PWM |
| 28 | D10/PWM | Idijithali | GPIO; ingasetyenziswa njenge PWM |
| 29 | D11/MOSI | Idijithali | SPI MOSI; ingasetyenziswa njenge GPIO |
| 30 | D12/MISO | Idijithali | SPI MISO; ingasetyenziswa njenge GPIO |
Debug
Kwicala elisezantsi lebhodi, phantsi kwemodyuli yonxibelelwano, iimpawu ze-debug zihlelwe njenge-3 × 2 iipadi zokuvavanya kunye ne-100 mil pitch kunye ne-pin 4 esusiwe. I-Pin 1 ibonakaliswe kwi-Figure 3 - Izikhundla ze-Connector.
| Iphini | Umsebenzi | Uhlobo | Inkcazo |
| 1 | +3V3 | Ukuphuma kwamandla | Imveliso yamandla eveliswa ngaphakathi ukuze isetyenziswe njengomthamotage reference |
| 2 | SWD | Idijithali | nRF52480 iDatha yoLungiso lweNcingo olunye |
| 3 | SWCLK | Digital In | nRF52480 Iklokhi yocingo oluNye yokulungisa iimpazamo |
| 5 | GND | Amandla | Umhlaba wamandla |
| 6 | RST | Digital In | Ungeniso lokuseta ngokutsha olusebenzayo olusezantsi |
Ulwazi ngoomatshini
Ulwandlalo lweBhodi kunye neMingxunya yokuNqa
Amanyathelo ebhodi axutywe phakathi kwemetric kunye ne-imperial. Imilinganiselo yasebukhosini isetyenziselwa ukugcina igridi ye-100 mil pitch phakathi kwemiqolo yepin ukuyivumela ukuba ilingane ibhodi yesonka ngelixa ubude bebhodi buMetric.
Iziqinisekiso
Isibhengezo sokuThobela i-CE DoC (EU)
Sibhengeza phantsi koxanduva lwethu ukuba ezi mveliso zingentla zithobela le miqathango ilandelayo ye-EU kwaye ke ngoko sikulungele ukuhamba ngokukhululekileyo kwiimarike eziquka iManyano yaseYurophu (EU) kunye ne-European Economic Area (EEA).
Isibhengezo sokuThobela kwi-EU RoHS & REACH 211 01/19/2021
Iibhodi ze-Arduino zihambelana ne-RoHS 2 Directive 2011/65/EU yePalamente yaseYurophu kunye ne-RoHS 3 Directive 2015/863/EU yeBhunga le-4 kaJuni 2015 ekuthinteleni ukusetyenziswa kwezinto ezithile ezinobungozi kwisixhobo sombane kunye ne-elektroniki.
| Iziyobisi | Elona qondo liphezulu (ppm) |
| Khokela (Pb) | 1000 |
| I-Cadmium (Cd) | 100 |
| Imercury (HG) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Iibiphenyls zePoly Brominated (PBB) | 1000 |
| I-Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| I-Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| I-Benzyl butyl phthalate (BBP) | 1000 |
| I-Dibutyl phthalate (DBP) | 1000 |
| I-Diisobutyl phthalate (DIBP) | 1000 |
Ukukhululwa: Akukho kukhululwa kubangwayo.
Iibhodi ze-Arduino zihambelana ngokupheleleyo neemfuno ezihambelanayo ze-European Union Regulation (EC) 1907 / 2006 malunga noBhaliso, uVavanyo, uGunyaziso kunye nokuThintelwa kweMichiza (REACH). Sibhengeza ukuba akukho nanye kwii-SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), ULuhlu lwabaMviwa beZinto eziNxibelelayo eziPhakeme kakhulu zogunyaziso ngoku olukhutshwe yi-ECHA, lukhona kuzo zonke iimveliso (kunye nephakheji) ngobuninzi obupheleleyo kuxinzelelo olulingana okanye ngaphezulu kwe-0.1%. Ngokolwazi lwethu, sikwabhengeza ukuba iimveliso zethu aziqulathanga naziphi na izinto ezidweliswe “kuLuhlu loGunyaziso” (Isihlomelo XIV semigaqo ye-REACH) kunye neZinto eziXhatha kakhulu (SVHC) kuyo nayiphi na imali ebalulekileyo njengoko ichaziwe. ngeSihlomelo XVII soluhlu lwabaMviwa olupapashwe yi-ECHA (i-Arhente yeMichiza yaseYurophu) 1907 /2006/EC.
Ungquzulwano lweZimbiwa isibhengezo
Njengomthengisi wehlabathi jikelele wamacandelo e-elektroniki kunye nombane, i-Arduino iyazazi izibophelelo zethu malunga nemithetho nemimiselo malunga neMinerali ye-Conflict, ngokukodwa i-Dodd-Frank Wall Street Reform kunye ne-Consumer Protection Act, iCandelo le-1502. njengeTin, iTantalum, iTungsten, okanye iGolide. Iiminerali eziphikisanayo ziqulethwe kwiimveliso zethu ngendlela ye-solder okanye njengecandelo kwii-alloys zetsimbi. Njengenxalenye yenkuthalo yethu efanelekileyo, iArduino iqhagamshelane nabanikezeli becandelo ngaphakathi kwekhonkco lethu lokubonelela ukuqinisekisa ukuqhubeka kwabo ukuthobela imimiselo. Ngokusekelwe kulwazi esilufumeneyo ukuza kuthi ga ngoku, sibhengeza ukuba iimveliso zethu ziqulathe iziMbiwa zoNgqubano ezithathwe kwiindawo ezingenazingxabano.
INGXELO yeFCC
Naluphi na uTshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo.
Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
- Esi sixhobo sisenokungabangeli uphazamiseko oluyingozi
- Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.
FCC RF Radiation Exposure Statement
- Esi siThuthi akufuneki sibe kwindawo enye okanye sisebenze kunye nayo nayiphi na enye i-eriyali okanye isidluliseli.
- Esi sixhobo sithobela imida yokuvezwa kwemitha ye-RF emiselwe indawo engalawulwayo.
- Esi sixhobo kufuneka sifakwe kwaye sisebenze kunye nomgama omncinci we-20cm phakathi kweradiyetha kunye nomzimba wakho.
Iincwadana zabasebenzisi zezixhobo zerediyo ezikhululwe kwilayisenisi ziya kuba nesi saziso silandelayo okanye esifanayo kwindawo ecacileyo kwincwadi yomsebenzisi, kungenjalo kwisixhobo okanye zombini. Esi sixhobo sithobela i(s) kwi-RSS yelayisenisi ye-Industry Canada-ekhutshiweyo. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
- Esi sixhobo sisenokungabangeli ukuphazamiseka
- Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.
Isilumkiso se-IC SAR
Esi sixhobo kufuneka sifakwe kwaye sisebenze kunye nomgama omncinci wama-20 cm phakathi kweradiyetha kunye nomzimba wakho.
Kubalulekile: Ubushushu bokusebenza kwe-EUT abunakudlula kwi-85℃ kwaye akufunekanga bube ngaphantsi kwe -40℃.
Ngale ndlela, i-Arduino Srl ibhengeza ukuba le mveliso ihambelana neemfuno ezibalulekileyo kunye namanye amalungiselelo afanelekileyo oMgaqo ka-2014/53/EU. Le mveliso ivumelekile ukuba isetyenziswe kuwo onke amazwe angamalungu e-EU.
| Iibhendi zokuphindaphinda | Awona mandla emveliso aphezulu (ERP) |
| 863-870Mhz | I-TBD |
Ulwazi lweNkampani
| Igama leKhampani | Arduino Srl |
| Idilesi yeNkampani | Via Andrea Appiani 25 20900 MONZA Italy |
Amaxwebhu ekubhekiswa kuwo
| Isalathiso | Ikhonkco |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/software |
| Arduino IDE (Cloud) | https://create.arduino.cc/editor |
| Cloud IDE Ukuqalisa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web- editor-4b3e4a |
| Iforamu | http://forum.arduino.cc/ |
| UNina B306 | https://content.u-blox.com/sites/default/files/NINA-B3_DataSheet_UBX-17052099.pdf |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Isalathiso seThala leeNcwadi | https://www.arduino.cc/reference/en/ |
Imbali yohlaziyo
| Umhla | Uhlaziyo | Iinguqu |
Amaxwebhu / Izibonelelo
 |
Arduino ABX00071 Nano 33 BLE Imodyuli [pdf] Isikhokelo somsebenzisi ABX00071 Nano 33 BLE Imodyuli, ABX00071, Nano 33 BLE Imodyuli, BLE Imodyuli, Imodyuli |