Altronix Maximal11FV Maximal FV Series Dual Power Supply Access Controllers Isikhokelo sokuFakelo

Altronix MaximalFV Ukufikelela Amandla / abalawuli basasaze kwaye batshintshe amandla ukufikelela kwiinkqubo zokulawula kunye nezixhobo. Baguqula i-220VAC (uluhlu olusebenzayo lwe-198VAC - 256VAC), i-50 / 60Hz igalelo kwishumi elinesithandathu (16) elizimeleyo elilawulwa yi-12VDC okanye i-24VDC ye-fuse-protected outputs. Ezi ziphumo zamandla ziFail-Safe/Fail-Secure zinokuguqulelwa kwifomu eyomileyo “C” abafowunelwa. Iziphumo zivulwe ngumqokeleli ovulekileyo we-sink okanye ngokuqhelekileyo evulekileyo (NO) igalelo lokubangela okomileyo ukusuka kwiNkqubo yoLawulo loFikelelo, i-keypad, iqhosha lokutyhala, i-REX PIR, njl. , Ukubetha koMbane, iziBambi zeMagnetic Door, njl.njl. IsiNxulumanisi se-FACP sivumela ukuPhuma kweNgxaki, ukuJonga iAlarm, okanye kusenokusetyenziswa ukucupha ezinye izixhobo ezincedisayo. Uphawu lokuqhawula ialam yomlilo lukhethwa ngokwalo nakweyiphi na okanye kuzo zonke iziphumo ezilishumi elinesithandathu (16).

Itshathi yoLungiselelo lweMaximalFV Series:

Inombolo yeModeli ye-Altronix	IsiPhumo seSibizo se-DC Voltage Iinketho								UBonelelo oluPhezulu lwangoku lweMain kunye ne-Aux. Iziphumo (Ubonelelo lwaMandla 1 / isiBonelelo soMbane 2) (A)	IFuse Iziphumo eziKhuselweyo	220VAC 50/60 Hz Igalelo (ngoku)	Okwangoku ngokwe ACM8 imveliso (A)	IBhodi yoBonelelo lwaMandla oNgeniso lweFuse yokuHlola	IBhodi yoBonelelo lwaMandla oMbane weBattery Fuse Rating	I-ACM8 yeBhodi yokuFakwa kweNgcaciso yeFuse
	Umbane 1				Umbane 2
	[DC]		[AUX]		[DC]		[AUX]
	12VDC Uluhlu Lweziphumo (V)	24VDC Uluhlu Lweziphumo (V)	12VDC Uluhlu Lweziphumo (V)	24VDC Uluhlu Lweziphumo (V)	12VDC Uluhlu Lweziphumo (V)	24VDC Uluhlu Lweziphumo (V)	12VDC Uluhlu Lweziphumo (V)	24VDC Uluhlu Lweziphumo (V)
Ubukhulu be11FV	eFlow4NBV				eFlow4NBV				-	16	4.2A	2.5	5A/ 250V	7.5A/ 32V	10A/ 250V
	10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3A
	10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6A
	-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6A
Ubukhulu be33FV	eFlow6NBV				eFlow6NBV				-	16	4.2A	2.5	5A/ 250V	10A/ 32V	10A/ 250V
	10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3A
	10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6A
	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6A
Ubukhulu be55FV	eFlow102NBV				eFlow102NBV				-	16	4.2A	2.5	5A/ 250V	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	9.3A + 9.3A
Ubukhulu be75FV	eFlow102NBV				eFlow104NBV				-	16	4.8A	2.5	5A/250V (eFlow102NBV) 6.3A/250V (eFlow104NBV)	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4	9.3A + 9.6A
Ubukhulu be77FV	eFlow104NBV				eFlow104NBV				-	16	5.4A	2.5	6.3A/250V	15A/ 32V	10A/ 250V
	-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4	9.6A + 9.6A

Iimpawu eziphezulu zeFV Series

I-ACM8 Iimodyuli zoLawulo lwaMandla:

Abalishumi elinesithandathu (16) baxhokonxa ngokuzimeleyo iziphumo ezilawulwayo. Iinketho zemveliso:
a) Ishumi elinesithandathu (16) Imveliso yamandla ehluzwayo yoFail-Safe.
b) Ishumi elinesithandathu (16) UFail-Khusela amandla ahluzwayo ahluzwayo.
c) Ishumi elinesithandathu (16) ifom "C" i-relay outputs (rated @ 5A/28VDC okanye iVAC).
d) Nayiphi na indibaniselwano engasentla.
Ishumi elinesithandathu (16) iNkqubo yoLawulo loFikelelo ibangela amagalelo. Iinketho zokubangela igalelo:
a) Ishumi elinesithandathu (16) lidla ngokuvula (HAYI) amagalelo e-trigger eyomileyo.
b) Ishumi elinesithandathu (16) lamagalelo abaqokeleli avulekileyo.
c) Nayiphi na indibaniselwano engasentla.

Ishumi elinesithandathu (16) elingatshintshiyo elihluziweyo. iziphumo zamandla (iziphumo zilinganiswe @ 2.5A).
Ii-LED ezibomvu kwibhodi ye-ACM8 zibonisa ukuba iziphumo zomntu ngamnye zivuselelwe (ukuhanjiswa amandla).

Ukuqhawulwa kweAlarm yoMlilo (i-latching okanye ukungaxhunywanga) ikhethwa ngokukodwa kuzo naziphi na okanye zonke ezisibhozo (8) iziphumo.
Iinketho zokubangela iAlam yoMlilo:
a) Ngokuqhelekileyo ivuliwe (NO) okanye ivalwe ngokuqhelekileyo (NC) igalelo letrigger eyomileyo.
b) Igalelo lokubuyisela umva kwe-polarity ukusuka kwisekethe yomqondiso we-FACP.
I-LED eluhlaza kwibhodi ye-ACM8 ibonisa ukuqhawulwa kwe-FACP kubangelwa.

Ugqithiso lwemveliso ye-FACP lubonisa ukuba igalelo le-FACP liqalisiwe (ifomu "C" yoqhagamshelwano ilinganiswe @ 1A/28VDC).
I-eFlow Power Supply / Charger inikeza amandla aqhelekileyo kwibhodi ye-ACM8 (i-wiring ye-factory) kunye nazo zonke izixhobo zokulawula ukufikelela ezixhunyiwe (i-wiring field).

Ibhodi ye-ACM8 iifuse eziphambili zibekwe kwi-@ 10A. Iifusi zemveliso zilinganiswe @ 3.5A. eFlow Power Supply/Tjaja:
Igalelo: 220VAC 50/60Hz.
Kwimveliso voltage kunye nonikezelo lwangoku bhekisa kwi-MaximalFV Series Configuration Chart, pg. 3.

Imveliso encedisayo ilinganiswe @ 1A (engatshintshiyo).
UkugqithisatagUkukhusela.
Itshaja eyakhelwe-ngaphakathi ye-asidi yelothe etywiniweyo okanye iibhetri zohlobo lwejeli.
Ubuninzi bentlawulo yangoku 1.54A.
Ukutshintshela kwibhetri ezenzekelayo xa i-AC isilela. Ukutshintshela kwi-stand-by amandla ebhetri kwenzeka ngoko nangoko kwaye akukho siphazamiso.

Ukuqhawula i-Alarm yoMlilo egadiweyo (i-latching okanye i-non-latching) 10K EOL resistor. Isebenza ngesiqhelo evuliweyo (NO) okanye eqhele ukuvalwa (NC) trigger.
I-AC iyasilela ukubeka iliso (ifomu “C” abafowunelwa).
Ibhetri iyasilela kunye nolawulo lobukho (ifomu “C” abafowunelwa).
Ukuvalwa kwamandla aphantsi. Ivala iitheminali zemveliso yeDC ukuba ibhetri inomthamotage yehla ngaphantsi kwe-71-73% kwiiyunithi ze-12V kunye ne-70-75% kwiiyunithi ze-24V (kuxhomekeke kumbane). Ithintela ukukhutshwa kwebhetri enzulu.

Ukufumana ulinganiso lwefuse bhekisa kwiTshati yoLungiselelo lweMaximalFV Series, p. 3.
Green AC Power LED ibonisa 220VAC ekhoyo.
Igalelo le-AC kunye neziphumo ze-DC zezibonakaliso ze-LED.
Isiphaluka esifutshane kunye nokhuseleko lomthwalo ogqithisiweyo.
Indawo evalekileyo ithatha ukuya kuthi ga kwiibhetri ezine (4) 12VDC/12AH.
Imilinganiselo ye-Enclosure (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

IMiyalelo yokuFaka okuphezulu kweFV

Iindlela zocingo ziya kuhambelana neKhowudi yoMbane yeSizwe / NFPA 70 / ANSI, iKhowudi yoMbane yaseKhanada, iCandelo I, iCandelo II kunye nazo zonke iikhowudi zendawo kunye namagunya anegunya. Imveliso yenzelwe ukusetyenziswa kwangaphakathi
kuphela.

UBonelelo lwaMandla lwe-LED Diagnostics
Access Power Controller LED Diagnostics
Ukuchongwa kweSigqeba seBhodi yoBonelelo lwaMandla
Ukuchongwa kwetheminali yoLawulo lwaMandla okufikelela
IBhodi yoBonelelo ngoMbane iNgcaciso yebhetri emileyo
IsiPhumo seBhodi yoBonelelo lwaMandla VoltagIzicwangciso
Ukufikelela kuMlawuli waMandla oMzobo weSicelo soMzobo
I-FACP / i-Optional Power Supply Hook-up diagrams

Yongeza iyunithi kwindawo oyifunayo. Phawula kwaye ugrumbe imingxuma eludongeni ukuze ulungelelanise nemingxuma emithathu ephezulu yesitshixo kwindawo ebiyelweyo. Faka izinto zokuqhobosha ezintathu eziphezulu kunye nezikrufu eludongeni kunye neentloko ze-screw eziphumayo. Beka imingxuma yesitshixo ephezulu yesivalo phezu kwezikrufu ezithathu eziphezulu, umgangatho kwaye ukhuseleke. Phawula indawo yemingxuma emithathu engezantsi. Susa indawo ebiyelweyo. Gqoka imingxunya engezantsi kwaye ufake izibophelelo ezintathu. Beka imingxunya engaphezulu yesitshixo phezu kwezikrufu ezithathu eziphezulu. Faka izikrufu ezithathu ezisezantsi kwaye uqinisekise ukuba uqinisa zonke izikrufu (I-Enclosure Dimensions, pg.).

Xhuma amandla e-AC angatshintshiyo (220VAC 50/60Hz) kwiitheminali eziphawulwe [L, N] (Fig. 3,).
Sebenzisa i-14 AWG okanye enkulu kulo lonke uqhagamshelwano lwamandla. Khusela ucingo oluluhlaza lukhokelela kwi-lug yomhlaba.
Gcina iingcingo zombane ezisikelwe umda ngokwahlukileyo kwiingcingo ezingenamandla-mda.
Makubonelelwe ngesithuba esisezantsi esingu-0.25”.
ISILUMKO: Musa ukubamba iindawo zentsimbi ezivelileyo. Vala amandla esekethe yesebe ngaphambi kokufaka okanye ukusevisa izixhobo. Akukho malungu anokusetyenziswa ngumsebenzisi ngaphakathi. Ugqithise ufakelo kunye nenkonzo kubasebenzi benkonzo abaqeqeshiweyo.
Khetha isiphumo esifunekayo se-DCtage ngokumisela i-SW1 kwindawo efanelekileyo kwibhodi yonikezelo lwamandla (Maximal11FV kunye neMaximal33FV, iFig. 1, pg. 9). Ubonelelo lwamandla oluphezulu lwe55F lusetwe kwi-12VDC. Ubonelelo lwamandla oluphezulu lwe-Maximal77F lusetwe kwi-24VDC. IMaximal75F iqulathe ibhodi yobonelelo ngombane enye (1) ekwifektri esetwe kwi-12VDC, kunye nebhodi yobonelelo ngombane enye (1) esetwe kwi-24VDC.

Ukulinganisa umthamo wemvelisotage yeyunithi phambi kokudibanisa naziphi na izixhobo ukuqinisekisa ukusebenza ngokufanelekileyo.
Umthamo ongafanelekanga okanye ophezulutage iya konakalisa ezi zixhobo.
Iinketho zemveliso (Fig. 2,):
Iyunithi iya kubonelela ngeziphumo zamandla atshintshiweyo alishumi elinesithandathu (16), ezilishumi elinesithandathu (16) ezomileyo zeziphumo ze "C", okanye nayiphi na indibaniselwano yazo zombini ezi zixhobo zombane kunye neziphumo zefom "C".
(a) UFail-Safe Switched Power iziphumo:
Kumsebenzi oFail-Safe qhagamshela igalelo elihle (+) lezixhobo zolawulo lofikelelo kwitheminali ephawulweyo
[NC]. Qhagamshela igalelo elibi (–) lezixhobo zolawulo lofikelelo kwitheminali ephawulweyo [COM].
(b) UFail-Secure Switched Power outputs:
Kumsebenzi oFail-Secure qhagamshela igalelo elilungileyo (+) lezixhobo zolawulo lofikelelo kwitheminali ephawulwe [HAYI]. Qhagamshela igalelo elibi (–) lezixhobo zolawulo lofikelelo kwitheminali ephawulweyo [COM].
(c) Iziphumo zeFom “C”:
Xa iziphumo zefom "C" zifunwa i-fuses yemveliso ehambelanayo (1-8) yebhodi nganye ye-ACM8 kufuneka isuswe.

I-ACM8 Imveliso yaMandla oNcedisayo (engatshintshiyo):
Qhagamshela izixhobo zolawulo lofikelelo ezifuna amandla angaguqukiyo kwiitheminali eziphawulwe [C] zilungile (+) kunye ne [COM] engalunganga (–). Iziphumo zingasetyenziselwa ukunika amandla kwizifundi zekhadi, iiphedi zamaqhosha njl njl. Iziphumo eziNcedisayo ze-eFlow (ezingazitshintshi)
Kuqhagamshelo lwesixhobo esincedisayo esi siphumo asizukuchatshazelwa nguNqamlezo lwaMandla aPhantsi okanye iAlam yoMlilo
Ujongano. Qhagamshela isixhobo kwiitheminali eziphawulwe [+ AUX –] (Umfanekiso 3,).
Iinketho zokubangela igalelo (Umfanekiso 2):
(a) Ngesiqhelo Vula [HAYI] igalelo lokuqalisa:
Amagalelo 1-8 avulwa ngamagalelo aqhelekileyo avulekileyo okanye avulekileyo okuqokelela. Qhagamshela iziphumo zephaneli yokufikelela, iiphedi zamaqhosha, amaqhosha okutyhala, ii-REX PIRs, njl.njl. kwiitheminali eziphawulwe [IN] kunye ne [GND].
(b) Vula amagalelo eSinki yoMqokeleli:
Qhagamshela indawo yolawulo yofikelelo isinki evulekileyo yomqokeleli evumayo (+) kwiitheminali eziphawulwe [IN] kunye nenegative (–) kwiitheminali eziphawulwe [GND].

ACM8 Fire Alarm Interface ongakhetha kuzo (Figs. 5-9):
Okuqhelekileyo kuvalwe [NC] okanye okuqhelekileyo okuvula igalelo lokufaka inqaku [NO] ukusuka kwiphaneli yokulawula ialam yomlilo okanye igalelo lokubuyisela umva kwepolarity ukusuka kwisekethe yomqondiso weFACP iya kuchaphazela iziphumo ezikhethiweyo. Ukuvumela i-FACP Uqhawulo kwimveliso, cima i(izi)ezihambelanayo (s) [SW1-SW8] CIMA kwibhodi nganye ye-ACM8. Ukuyekisa uqhagamshelo lwe-FACP kwimveliso, vula iiswitshi ezihambelanayo [SW1-SW8] ON kwibhodi nganye ye-ACM8.
(a) Ngesiqhelo Vula [HAYI] igalelo:
Ngokungaqhawukiyo i-hook-up bhekisa kwi-Fig. 6,. Kuba latching hook-up jonga Fig. 7,.
(b) Ngokuqhelekileyo kuvalwe [NC] igalelo:
Ukufumana i-hook-up engeyiyo i-latching jonga kwi-Fig.
(c) I-FACP yokuSawula igalelo leSekethe yokuqalisa:
Qhagamshela i-positive (+) kunye ne-negative (–) ukusuka kwimveliso yesekethe yomqondiso we-FACP kwiitheminali eziphawulwe [+ INP –]. Qhagamshela i-FACP EOL kwiitheminali eziphawulwe [+ RET –] (i-polarity ibhekiselele kwimeko ye-alam). I-Jumper ebekwe ecaleni kwe-TRG LED kufuneka inqunywe (Umfanekiso 6).
I-FACP Dry form “C” output (Ayivandlakanywa yi-UL) (Fig. 2a):
Ifomu ye-FACP “C” abafowunelwa inokusetyenziselwa ukwenza ingxelo okanye izixhobo zokubonisa. Ezi zitshintshi zoqhagamshelwano kwi-alamu yomlilo yokufaka igalelo kwiibhodi ze-ACM8.

Uqhagamshelo lwebhetri emileyo (Umfanekiso 3):
Kulawulo loFikelelo izicelo iibhetri zikhethwa. Xa iibhetri zingasetyenziswanga, ilahleko ye-AC iya kukhokelela ekuphulukaneni nomthamo wemvelisotage. Xa ukusetyenziswa kweebhetri ezimeleyo zifunwa, kufuneka zibe yi-asidi ekhokelayo okanye uhlobo lwejeli.
Xhuma ibhetri kwiitheminali eziphawulweyo [- BAT +] (Umfanekiso 3, iphe. 10). Sebenzisa ezimbini (2) iibhetri ze-12VDC eziqhagamshelwe kuthotho lwe-24VDC yokusebenza (ibhetri ekhokelayo ibandakanyiwe). Sebenzisa iibhetri-Casil CL1270 (12V/7AH), CL12120
(12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) iibhetri okanye i-UL eqatshelwe i-BAZR2 kunye ne-BAZR8 iibhetri zomlinganiselo ofanelekileyo.
Iziphumo zebhetri kunye ne-AC Supervision (Fig. 3):
Kuyafuneka ukudibanisa izixhobo zokunika ingxelo yengxaki kwiziphumo eziphawulwe [AC Fail, BAT Fail] supervisory relay outputs eziphawulwe [NC, C, NO] kwizixhobo ezifanelekileyo zesaziso esibonakalayo.
Sebenzisa i-22 AWG ukuya kwi-18 AWG ye-AC Fail kunye ne-Low / Akukho ngxelo yebhetri.
Ukulibazisa ingxelo ye-AC kwiiyure ze-2., setha idiphu yediphu [Ukulibaziseka kwe-AC] ukuya kwindawo OFF (Umfanekiso 3).
Ukulibazisa ingxelo ye-AC ye-1 min., setha idiphu yediphu [i-AC Delay] kwi-ON isikhundla (Umfanekiso 3).
NONE
Ukuvumela iAlam yoMlilo Nciphisa uqhagamshelwano usete iswitshi yediphu [Cima] kwindawo YOKUVULA.
Ukuyekisa i-Alarm yoMlilo Nqamula usete iswitshi yediphu [Cima] ukuya kwindawo yokuvala.
Ufakelo lwe-tamper switsha (Ayiqukwanga) (Fig. 3b):
Mount UL Uluhlu tamper switsha (Honeywell Model 112 okanye ilingana) phezulu kwindawo ebiyelweyo. Slayida i-tamper tshintshela isibiyeli kwincam yendawo ebiyelweyo malunga ne-2” ukusuka kwicala lasekunene (Umfanekiso 3b).
Qhagamshela tamper switsha iingcingo kwiPaneli yoLawulo lofikelelo igalelo okanye ingxelo efanelekileyo yoLudwe lweUL
isixhobo. Ukuvula isignali yesivusi vula ucango lwendawo ebiyelweyo.
Amagalelo ombane amaninzi (Fig. 2):
Xa usebenzisa unikezelo lwamandla olongezelelweyo lwangaphandle, i-jumpers J1 kunye ne-J2 ebekwe kwibhodi ye-ACM8 ehambelanayo kufuneka inqunywe (umzobo 2c, 2d, kunye nomfanekiso 5). Qhagamshela unikezelo lwamandla olawulo lofikelelo lwangaphandle kwiitheminali eziphawulwe [– Ulawulo +] (Ezi theminali zingqamene neetheminali [– Amandla +]). Xa usebenzisa izixhobo zombane ze-DC, i-polarity kufuneka ijongwe. Xa usebenzisa izixhobo zombane ze-AC, i-polarity ayifuni ukubonwa (Umfanekiso 2d, iphe. 9). Lonke uqhagamshelo locingo endle kufuneka lwenziwe kuqashwe igeyiji efanelekileyo yocingo oluyi-CM okanye iFPL enebhatyi ucingo (okanye ibambela elilinganayo) (Fig. 4a).

Isondlo

Iyunithi kufuneka ivavanywe kanye ngonyaka ukuba isebenze ngokufanelekileyo ngolu hlobo lulandelayo:

Ulongamelo lwe-FACP: Ukuqinisekisa uqhagamshelo olululo kunye nokusebenza kweAlamu yoMlilo qhawula uqhagamshelo. Nceda ulandele inkqubo efanelekileyo ingezantsi:

Ngesiqhelo Vula igalelo: Ukubeka isithuba esifutshane phakathi kweetheminali eziphawulwe [T] kunye ne [+ INP] kuya kuxhokonxa iSivusi soMlilo sokuqhawula. Susa imfutshane ukuseta kwakhona.

Igalelo Elivalwayo: Ukususa ucingo kwitheminali ephawulwe [INP –] kuya kuvusa iSivusi soMlilo Uqhawulo. Buyisela ucingo kwitheminali ephawulwe [INP –] ukusetwa kwakhona.
Ungeniso lweSekethe yoMqondiso weFACP: It is necessary to trigger the Fire Alarm System. In all of the above scenarios the green TRG LED of the ACM8s will illuminate. All outputs selected for Fire Alarm Disconnect will activate releasing locking devices.

Phawula: Zonke iziphumo [OUT 1] – [OUT 8] mazibe kwimeko yesiqhelo (de-energized) phambi kovavanyo. Xa iyunithi ilungiselelwe Ngokuqhelekileyo iVulekile (Umfanekiso 8) okanye Ngokuqhelekileyo iValwe (umfanekiso we-10) i-latching operation, kuyimfuneko ukuseta kwakhona i-Alarm Alarm Disconnect ngokuvula iswitshi yokusetha kwakhona Ngokuqhelekileyo.

Imveliso Voltage Uvavanyo: Phantsi kweemeko eziqhelekileyo zomthwalo, i-DC output voltage kufuneka ikhangelwe umthamo ofanelekileyotage inqanaba (bhekisa kuMaximalF uthotho lweTshati yoLungiselelo).

Uvavanyo lwebhetri: Phantsi kweemeko eziqhelekileyo zomthwalo khangela ukuba ibhetri igcwaliswe ngokupheleleyo, jonga umthamo ochaziweyotage kwiitheminali zebhetri nakwiitheminali zebhodi eziphawulwe [+ BAT –] ukuqinisekisa ukuba akukho khefu kwiintambo zoqhagamshelo lwebhetri.
Phawula: Ubuninzi bentlawulo yangoku yi-1.54A. Ubomi bebhetri obulindelekileyo yiminyaka emi-5; nangona kunjalo, kuyacetyiswa ukuba utshintshe iibhetri kwiminyaka emi-4 okanye ngaphantsi xa kuyimfuneko.

UBonelelo loMbane lwe-LED Diagnostics:

Ebomvu (DC)	Luhlaza (AC/AC1)	Ubume boNikezelo lwaMandla
ON	ON	Imeko yokusebenza eqhelekileyo.
ON	CIMA	Ukulahleka kwe-AC. Ibhetri yokubonelela ngamandla.
CIMA	ON	Akukho mveliso yeDC.
CIMA	CIMA	Ukulahleka kwe-AC. Ikhutshiwe okanye ayikho ibhetri yokulinda. Akukho mveliso yeDC.

Bomvu (Ilulwane)	Ubume bebhetri
ON	Imeko yokusebenza eqhelekileyo.
CIMA	Ibhetri ayisebenzi/ibhetri ephantsi.

UFikelelo kuMlawuli waMandla we-LED Diagnostics:

I-LED	ON	CIMA
I-LED 1- LED 8 (Bomvu)	Ugqithiso lwemveliso lunikwe amandla.	Ugqithiso lwemveliso lucinywe amandla.
Trg (Green)	Igalelo le-FACP licushiwe (imeko ye-alarm).	FACP eqhelekileyo (imeko engeyo-alarm).

IiNgcaciso zeBhetri yeSibonelelo soMbane:

Ibhetri	Ubuninzi11F	Ubuninzi33F	IMaximal55F, iMaximal75F, kunye neMaximal77F
7AH	30 imiz./4A	10 imiz./6A	5 imiz./10A
12AH	35 imiz./4A	30 imiz./6A	30 imiz./10A
40AH	Ngaphezulu kweeyure ezi-4/4A	Ngaphezulu kweeyure ezi-4/6A	Ngaphezulu kweeyure ezi-2/10A
65AH	Ngaphezulu kweeyure ezi-4/4A	Ngaphezulu kweeyure ezi-4/6A	Ngaphezulu kweeyure ezi-4/10A

Ukuchongwa kweSigqeba seBhodi yoBonelelo lwaMandla:

Ixesha lesiphelo	Umsebenzi/Inkcazo
L, G, N	Qhagamshela i-220VAC 50/60Hz kwezi terminals: L ukuya kushushu, N ukungathathi hlangothi. Musa ukusebenzisa i-terminal ephawulwe [G].
+ DC -	Umzi-mveliso oqhagamshelwe kwibhodi ye-ACM8.
Qalisa i-EOL eLawulwayo	I-Fire Alarm Interface ibangela igalelo elisuka kwifutshane okanye kwi-FACP. Amagalelo e-trigger aqhele ukuvulwa, aqhele ukuvalwa kwisekethe yemveliso ye-FACP (igalelo elilinganiselweyo lamandla) (Umfanekiso 3, iphepha 10).
HAYI, UKUSETHA KWAKHONA kwe-GND	Ujongano lwe-FACP olubambekayo okanye olungabambekiyo (amandla-alinganiselwe) (Umfanekiso wesi-3, iphe. 10).
+ AUX –	Imveliso encedisayo elinganiselweyo inikwe umlinganiselo @ 1A (engatshintshiyo) (Umfanekiso wesi-3, iphe. 10).
AC FAIL NC, C, NO	Ibonisa ukulahleka kwamandla e-AC, umz. qhagamshela isixhobo esivakalayo okanye kwiphaneli ye-alam. I-Relay idla ngokuba namandla xa amandla e-AC ekhona. Ukulinganisa uQhagamshelwano 1A @ 30VDC (amandla-alinganiselwe) (Umfanekiso wesi-3, iphe. 10).
BAT FAIL NC, C, NO	Ibonisa imeko yebhetri ephantsi, umz. qhagamshela kwiphaneli yesivusi. I-Relay idla amandla xa amandla eDC ekhona. Ukukala koqhagamshelwano 1A @ 30VDC. Ibhetri esusiweyo ixelwa kwimizuzu emi-5. Ukuqhagamshelwa kwakhona kwebhetri kuxelwe ngaphakathi komzuzu omnye (amandla-alinganiselwe) (Ikhiwane. 3, pg. 10).
+ BAT –	Uqhagamshelo lwebhetri emileyo. Ubuninzi bentlawulo yangoku yi-1.54A (ayinamandla-mda) (Ikhiwane. 3, pg. 10).

Ukufikelela kwiSitena soMlawuli waMandla:

Ixesha lesiphelo	Umsebenzi/Inkcazo
– Amandla +	I-12VDC okanye i-24VDC evela kumbane/itshaja (ifektri iqhagamshelwe). Ezi theminali zingqamene neetheminali [- Control +].
– Ulawulo +	Ezi theminali zingqamene neetheminali [- Amandla +]. Ezi theminali zinokuqhagamshelwa kunikezelo lwamandla lofikelelo oludwelisiweyo lwangaphandle ukunika amandla okusebenza awodwa kwizixhobo (Ayivandlakanywa yi-UL). IiJumpers J1 kunye ne-J2 kufuneka zisuswe.
I-TRIGGER INPUT 1- INPUT 8 IN, GND	Ukusuka kwisiqhelo esivulekileyo kunye / okanye sivule umqokeleli we-sink trigger amagalelo (isicelo sokuphuma amaqhosha, ukuphuma kweepir, njl.njl.)
IPHUMO 1- ISIPHUMO 8 NC, C, NO, COM	I-12VDC ukuya kwi-24VDC ibangela iziphumo ezilawulwayo. Ubuninzi bomthwalo kwimveliso nganye yi-2.5A.
	Maximal11FV: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A okanye P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4VDC I-P/S 3.6 - 1-10.1VDC @ 13.2A kunye ne-P/S 3.3 - 2-20.28VDC @ 26.4A.
	Maximal33FV: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A okanye P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4VDC I-P/S 5.6 - 1-10.0VDC @ 13.2A kunye ne-P/S 5.3 - 2-20.28VDC @ 26.4A.
	Maximal55FV: P / S 1 - 10.03-13.2VDC @ 9.3A kunye ne-P/S 2 - 10.03-13.2VDC @ 9.3A.
	Maximal75FV: P / S 1 - 10.03-13.2VDC @ 9.3A kunye ne-P/S 2 - 20.17-26.4VDC @ 9.6A.
	Maximal77FV: P / S 1 - 20.17-26.4VDC @ 9.6A kunye ne-P/S 2 - 20.17-26.4VDC @ 9.6A.
	IFail-Safe [NC positive (+) & COM Negative (–)], Fail-Secure [AKUKHO izinto ezilungileyo (+) & COM Negative (–)], Imveliso encedisayo [C positive (+) & COM Negative (–)] ( Xa usebenzisa i-AC amandla ombane i-polarity kufuneka ingabonwa), i-NC, C, NO iguqulela kwifom eyomileyo "C" 5A 24VAC / VDC ilinganiswe iziphumo ezomileyo xa i-fuses isusiwe. Abafowunelwa ababoniswe kwimeko engavuswanga.
FACP INTERFACE T, + INPUT –	I-Fire Alarm Interface ibangela igalelo elivela kwi-FACP. Amagalelo e-trigger anokuthi avuleke ngokuqhelekileyo, aqhele ukuvalwa ukusuka kwimveliso yesekethe yomqondiso we-FACP (Imifanekiso 5-9, iphepha 12).
I-FACP INTERFACE NC, C, NO	IFomu "C" yoqhagamshelwano lonxibelelwano ilinganiswe @ 1A 28VDC yengxelo ye-alarm (engavavanywanga yi-UL).

IsiPhumo seBhodi yoBonelelo lwaMandla Voltage Izicwangciso:

UFikelelo kuMlawuli waMandla oMzobo weSicelo (kwiACM8 nganye):

Umzobo 3 - Maximal FV Series

ISILUMKO: Xa ibhodi yonikezelo lwamandla imiselwe i-12VDC sebenzisa ibhetri enye kuphela (1) 12VDC yokuma.
Gcina iingcingo zombane ezisikelwe umda ngokwahlukileyo kumandla angenamandla.
Sebenzisa ubuncinane 0.25″ isithuba.
I-12AH Iibhetri ezitshajwayo zezona bhetri zininzi ezinokungena kule ndawo ivalekileyo. Uluhlu lwebhetri lwangaphandle oludweliswe nge-UL kufuneka lusetyenziswe ukuba usebenzisa i-40AH okanye ibhetri ye-65AH.

IiMfuno zoNxibelelwano zoMbane oMda we-NEC:
Umbane oqingqiweyo kunye nokungabikho kwamandla ombane wesekethe i-wiring kufuneka ihlale ihlulwe kwikhabhinethi. Zonke ii-wiring zesekethe ezisikelwe umda kufuneka zihlale ubuncinane ziyi-0.25” kude nakweyiphi na iingcingo zesekethe ezingenamandla. Ngaphezu koko, zonke ii-wiring zesekethe ezilinganiselweyo kunye ne-non-power-limited circuit wiring kufuneka zingene kwaye ziphume kwikhabhinethi ngokusebenzisa ii-conduits ezahlukeneyo.
Omnye onjalo example yale iboniswe ngezantsi. Isicelo sakho esithile sinokufuna ukunkqonkqozwa kombhobho okwahlukileyo ukuba kusetyenziswe. Nakuphi na ukunkqonkqozwa kombhobho kunokusetyenziswa. Ukusetyenziswa kwamandla alinganiselweyo ukusebenzisa i-conduit kuyakhethwa. Lonke uqhagamshelo lweingcingo endle kufuneka lwenziwe kuqashwe igeyiji efanelekileyo yocingo oluyi-CM okanye iFPL yocingo olufakwe ibhatyi (okanye ibambela elilingana nalo).
Ukhetho lwe-UL olufakwe eludweni lwebhetri malugxunyekwe kufuphi nonikezelo lombane ngendlela yodidi loku-1 yocingo.
Kufakelo lwaseKhanada sebenzisa iingcingo ezikhuselweyo kulo lonke uqhagamshelo.
Phawula: Jonga kumzobo wokuphatha ucingo ongezantsi ngendlela efanelekileyo yokufaka i-CM okanye i-FPL yocingo olufakwe ibhatyi (Umfanekiso 4a).

FACP Hook-Up imizobo

Umzobo 5 Ukudityaniswa kwekhonkco kusetyenziswa amagalelo amabini (2) obonelelo lwamandla azimeleyo (Isebenza kuphela kwiMaximal11F, ayivavanywanga yiUL):

Umzobo 6 Igalelo lokubuyisela umva kwe-polarity ukusuka kwimveliso yesekethe yomqondiso we-FACP (i-polarity ibhekiselele kwimeko ye-alam):

Umzobo 7 Ngokuqhelekileyo ivuliwe: Igalelo le-FACP elingabambeleliyo libangela:

Umzobo 8 Ngokuqhelekileyo Vula i-FACP Latching igalelo lokuqalisa ngokusetha kwakhona:

Umzobo 9 Ngokuqhelekileyo Ivalwe: I-FACP eNgabambekiyo ifaka igalelo lokuqalisa:

Umzobo 10 Ngesiqhelo Ivalwe: Ukuleya iFACP ifaka igalelo ngokusetha kwakhona:

Imilinganiselo yoNdawo (H x W x D uqikelelo):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm)

I-eFlow Power Supply/Itshaja zinokuLawulwa kwaye zibekwe esweni ngelixa iNgxelo yaMandla / uDiagnostics ukusuka naphi na ngaphezulu kweNethiwekhi…

I-LINQ2 - Imodyuli yoNxibelelwano lweNethiwekhi
I-LINQ2 ibonelela nge-IP ekude yokufikelela kwidatha yexesha lokwenyani ukusuka kunikezelo lwamandla/iitshaja ze-eFlow ukunceda ukugcina iinkqubo zisebenza kumanqanaba afanelekileyo. Iququzelela ukukhawuleza kunye nokulula ukufakwa kunye nokusekwa, ukunciphisa ixesha lokunciphisa inkqubo, kunye nokuphelisa iifowuni zenkonzo ezingadingekile, ezinceda ukunciphisa iindleko ezipheleleyo zoBunini (TCO) - kunye nokudala umthombo omtsha weRecurring Monthly Revenue (RMR).

Iimbonakalo:

I-UL idweliswe e-US naseCanada.
Ulawulo lwasekhaya okanye olukude ukuya kuthi ga kwi (2) ezimbini zeAltronix eFlow amandla aphumayo ngeLAN kunye/okanye iWAN.

Ukubeka iliso ixesha lokwenyani diagnostics: DC output voltage, imveliso yangoku, i-AC kunye nesimo sebhetri / inkonzo, igalelo libangela utshintsho lwemo, utshintsho lwemo yemveliso kunye nobushushu beyunithi.
Ulawulo lokufikelela kunye nolawulo lomsebenzisi: Misela ukufunda/ukubhala, Misela abasebenzisi kwizibonelelo ezithile
Ezimbini (2) zothungelwano oludityanisiweyo olulawulwayo kwiFom “C” yoRelay.
Ezithathu (3) ezibangela igalelo elicwangcisiweyo: Ulawulo lokuhanjiswa kunye nonikezelo lwamandla ngemithombo yehardware yangaphandle.

Izaziso ze-imeyile kunye ne-Windows Dashboard
Imbali yelog yesiganeko ilandelela.
I-Socket Layer ekhuselekileyo (SSL).
Inokucwangciswa nge-USB okanye web isikhangeli- sibandakanya isoftware yokusebenza kunye nentambo ye-USB eyi-6 ft.

I-LINQ2 ikhwela Ngaphakathi kuyo nayiphi na indawo ebiyelweyo

I-Altronix ayinaxanduva lwazo naziphi na iimpazamo zokuchwetheza.
140 58th Street, Brooklyn, New York 11220 USA | ifowuni: 718-567-8181 | ifeksi: 718-567-9056
webindawo: www.altronix.com
i-imeyile: info@altronix.com
Iwaranti yobomi bonke
IIMaximal11FV/33FV/55FV/75FV/77FV Series H11U

Maximal11VF/33FV/55FV/75FV/77V Series Access Controllers Power (Fused) isikhokelo sokuFakelo

Amaxwebhu / Izibonelelo

Altronix Maximal11FV Maximal FV Series Dual Power Supply Access Controllers [pdf] Isikhokelo soFakelo
Maximal11FV, Maximal55FV, Maximal11FV Maximal FV Series Dual Power Supply Access Controllers, Maximal11FV, Maximal FV Series Dual Power Supply Access Controllers, Access Power Controllers, Power Controllers, Controllers

Iimbekiselo

Incwadi yokusebenzisa

Altronix Maximal11FV Maximal FV Series Dual Power Supply Access Controllers

MaximalFV Series Overview