I-ZigBee yokukhanya yokutshintsha imodyuli yoMsebenzi weManuwali

ZigBee Smart plug
Incwadi yokusebenzisa

Intshayelelo yeMveliso

Ubunzima besixhobo bungaphantsi kwe-1 kg. Ubude bofakelo obungaphantsi kwe-2 m bucetyiswa.

Imiyalelo yokufakela

1. Umbane ucimile Ukuze ugweme ukothuka kombane, nceda uqhagamshelane nomthengisi okanye ingcali eqeqeshiweyo ukuze ufumane uncedo xa ufaka kwaye ulungisa.
2. Umyalelo wocingo
   Qinisekisa iingcingo ezichanekileyo phambi kokuba uvule isixhobo. S1/S2 can connect with the rocker light switch, or it doesn’t connect. To ensure safety, do not connect the neutral wire and live wire to it.

Iinkcukacha

Iimbonakalo

ZigBee plug is a smart Plug that adopts the ZigBee plug wireless protocol and connects to your internet through the ZigBee hub. You can turn on/off, schedule on/off, and share the device with your family to control together, and so on.

Ulawulo LWERIMOTHI	Ishedyuli yexesha
Ulawulo Lwelizwi	Yabelana ngolawulo
Isimo seSmart

The above functions are determined by the ZigBee Hub.

Umyalelo wokuSebenza

1. Khuphela i-APP
   Please refer to the user guide of the hub to download the corresponding APP. below platforms are recommended:

   SmartThings	IAmazon Alexa	Hue

2. Uqhagamshelo Hub
   Set the hub according to the user guide. Support ZigBee plug hubs as follows:
   Echo Studio
   I-Echo Plus (imodeli: ZE39KL)
   2nd Gen Echo Show (imodeli: DW84JL)
   2nd Gen Echo Plus (imodeli: L9D29R)
   Samsung SmartThings hub
   Philips Hue
   Ukuba unxibelelwano aluphumeleli, nceda usondeze ihabhu kwifowuni yakho kwaye uzame kwakhona.
3. Vula
   Emva kokukhanyisa, ifowuni iya kungena kwimodi yokubhanqa ngexesha lokuqala lokusetyenziswa, kunye nesalathisi se-LED sikhanya.
    The device will exit the pairing mode if no next operation for a long time. If you enter again, please long-press the manual switch for 5s until the LED signal indicator flashes and release.
4. Qhagamshela kwi-Alexa
   1. Power on the Plug
   2. Ask, “Alexa, discover devices!
   3. Plug ashes once it’s connected
   4. Wait until Alexa finishes, check the new devices” First/Second….plug”

Qhagamshela kwi-SmartThings

1. Power up the smart bulb, bulb breathe 3 times, and enter the configuration state.
2. Open the SmartThings app, and click”+”, click “Device”, click “SmartThings”, click “Lighting”, click ” Smart Bulb”, click “Start”, click “Next”, click “Skip the step”, click “Done”

Ukuphindisela kwisetingi sefetri

Long-press the configuration button for 5s until the LED signal indicator flashes and release, then the reset is successful. The device enters spairing mode.

If you pair the device with the hub again, please reset the device to factory default.

Yenziwe etshayina